Zabbix Documentation 3.4

3.04.05.0 (current)| In development:5.2 (devel)| Unsupported:1.82.02.22.43.23.44.24.4Guidelines

User Tools

Site Tools


Sidebar

manual:web_interface:frontend_sections:configuration:actions

This is an old revision of the document!


5 Actions

Overview

In the Configuration → Actions section users can configure and maintain actions.

A listing of existing actions with their details is displayed. The actions displayed are actions assigned to the selected event source (triggers, discovery, auto-registration).

To view actions assigned to a different event source, change the source from the dropdown to the right in the Actions bar.

Displayed data:

ColumnDescription
Name Name of the action. Clicking on the action name opens the action configuration form.
Conditions Action conditions are displayed.
Operations Action operations are displayed.
Since Zabbix 2.2, the operation list also displays the media type (e-mail, SMS, Jabber, etc) used for notification as well as the name and surname (in parentheses after the alias) of a notification recipient.
Status Action status is displayed - Enabled or Disabled.
By clicking on the status you can change it.
See the Escalations section for more details as to what happens if an action is disabled during an escalation in progress.

To configure a new action, click on the Create action button in the top right-hand corner.

Mass editing options

Buttons below the list offer some mass-editing options:

  • Enable - change the action status to Enabled
  • Disable - change the action status to Disabled
  • Delete - delete the actions

To use these options, mark the checkboxes before the respective actions, then click on the required button.

Filter

As the list may contain a number of actions, it may be needed to filter out the ones you really need.

The Filter link is available above the list of actions. If you click on it, a filter becomes available where you can filter actions by name and status.