This template is for Zabbix version: 7.0

Also available for: 6.4 6.2 6.0 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/7.0

Netgear Fastpath by SNMP

Overview

https://kb.netgear.com/24352/MIBs-for-Smart-switches

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Netgear M5300-28G

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}		`90`
{$TEMP_CRIT}		`60`
{$TEMP_CRIT_LOW}		`5`
{$TEMP_WARN}		`50`
{$TEMP_WARN_STATUS}		`2`
{$TEMP_CRIT_STATUS}		`3`
{$PSU_CRIT_STATUS:"failed"}		`2`
{$FAN_CRIT_STATUS:"failed"}		`2`
{$MEMORY.UTIL.MAX}		`90`
{$SNMP.TIMEOUT}	Time interval for the SNMP availability trigger.	`5m`
{$ICMP_LOSS_WARN}	Warning threshold of ICMP packet loss in %.	`20`
{$ICMP_RESPONSE_TIME_WARN}	Warning threshold of the average ICMP response time in seconds.	`0.15`
{$IF.ERRORS.WARN}	Warning threshold of error packet rate. Can be used with interface name as context.	`2`
{$IF.UTIL.MAX}		`90`
{$IFCONTROL}		`1`
{$NET.IF.IFNAME.MATCHES}		`^.*$`
{$NET.IF.IFNAME.NOT_MATCHES}	Filter out loopbacks, nulls, docker veth links and docker0 bridge by default	`Macro too long. Please see the template.`
{$NET.IF.IFOPERSTATUS.MATCHES}		`^.*$`
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}	Ignore notPresent(6)	`^6$`
{$NET.IF.IFADMINSTATUS.MATCHES}		`^.*`
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}	Ignore down(2) administrative status	`^2$`
{$NET.IF.IFDESCR.MATCHES}		`.*`
{$NET.IF.IFDESCR.NOT_MATCHES}		`CHANGE_IF_NEEDED`
{$NET.IF.IFALIAS.MATCHES}		`.*`
{$NET.IF.IFALIAS.NOT_MATCHES}		`CHANGE_IF_NEEDED`
{$NET.IF.IFTYPE.MATCHES}		`.*`
{$NET.IF.IFTYPE.NOT_MATCHES}		`CHANGE_IF_NEEDED`

Items

Name	Description	Type	Key and additional info
CPU utilization	MIB: FASTPATH-SWITCHING-MIB The CPU utilization expressed in %.	SNMP agent	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing Regular expression: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP agent	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP agent	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory utilization	Memory utilization in %.	Calculated	vm.memory.util[memoryUsedPercentage.0]
Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP agent	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing Discard unchanged with heartbeat: `1d`
Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP agent	system.hw.model Preprocessing Discard unchanged with heartbeat: `1d`
Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP agent	system.hw.serialnumber Preprocessing Discard unchanged with heartbeat: `1d`
Uptime (network)	MIB: SNMPv2-MIB Time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	system.net.uptime[sysUpTime.0] Preprocessing Custom multiplier: `0.01`
Uptime (hardware)	MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	system.hw.uptime[hrSystemUptime.0] Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
SNMP traps (fallback)	The item is used to collect all SNMP traps unmatched by other snmptrap items	SNMP trap	snmptrap.fallback
System location	MIB: SNMPv2-MIB Physical location of the node (e.g., `equipment room`, `3rd floor`). If not provided, the value is a zero-length string.	SNMP agent	system.location[sysLocation.0] Preprocessing Discard unchanged with heartbeat: `12h`
System contact details	MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.	SNMP agent	system.contact[sysContact.0] Preprocessing Discard unchanged with heartbeat: `12h`
System object ID	MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.	SNMP agent	system.objectid[sysObjectID.0] Preprocessing Discard unchanged with heartbeat: `12h`
System name	MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.	SNMP agent	system.name Preprocessing Discard unchanged with heartbeat: `12h`
System description	MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.	SNMP agent	system.descr[sysDescr.0] Preprocessing Discard unchanged with heartbeat: `12h`
SNMP agent availability	Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible values: 0 - not available 1 - available 2 - unknown	Zabbix internal	zabbix[host,snmp,available]
ICMP ping		Simple check	icmpping
ICMP loss		Simple check	icmppingloss
ICMP response time		Simple check	icmppingsec

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: High CPU utilization	The CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath by SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	Warning
Netgear Fastpath: High memory utilization	The system is running out of free memory.	`min(/Netgear Fastpath by SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	Average
Netgear Fastpath: Operating system description has changed	The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	Info	Manual close: Yes Depends on: Netgear Fastpath: System name has changed
Netgear Fastpath: Device has been replaced	Device serial number has changed. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath by SNMP/system.hw.serialnumber))>0`	Info	Manual close: Yes
Netgear Fastpath: Host has been restarted	Uptime is less than 10 minutes.	`(last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Netgear Fastpath by SNMP/system.net.uptime[sysUpTime.0])<10m)`	Warning	Manual close: Yes Depends on: Netgear Fastpath: No SNMP data collection
Netgear Fastpath: System name has changed	The name of the system has changed. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.name,#1)<>last(/Netgear Fastpath by SNMP/system.name,#2) and length(last(/Netgear Fastpath by SNMP/system.name))>0`	Info	Manual close: Yes
Netgear Fastpath: No SNMP data collection	SNMP is not available for polling. Please check device connectivity and SNMP settings.	`max(/Netgear Fastpath by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`	Warning	Depends on: Netgear Fastpath: Unavailable by ICMP ping
Netgear Fastpath: Unavailable by ICMP ping	Last three attempts returned timeout. Please check device connectivity.	`max(/Netgear Fastpath by SNMP/icmpping,#3)=0`	High
Netgear Fastpath: High ICMP ping loss		`min(/Netgear Fastpath by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Netgear Fastpath by SNMP/icmppingloss,5m)<100`	Warning	Depends on: Netgear Fastpath: Unavailable by ICMP ping
Netgear Fastpath: High ICMP ping response time	Average ICMP response time is too high.	`avg(/Netgear Fastpath by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`	Warning	Depends on: Netgear Fastpath: High ICMP ping loss Netgear Fastpath: Unavailable by ICMP ping

LLD rule Temperature Discovery

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP agent	temp.discovery

Item prototypes for Temperature Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP agent	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP agent	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Temperature

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The temperature value reported by sensor

SNMP agent

sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]

#{#SNMPVALUE}: Temperature status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The state of temperature sensor

SNMP agent

sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Trigger prototypes for Temperature Discovery

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: #{#SNMPVALUE}: Temperature is above warning threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}`	Warning	Depends on: Netgear Fastpath: #{#SNMPVALUE}: Temperature is above critical threshold
Netgear Fastpath: #{#SNMPVALUE}: Temperature is above critical threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}`	High
Netgear Fastpath: #{#SNMPVALUE}: Temperature is too low		`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}`	Average

LLD rule FAN Discovery

Name	Description	Type	Key and additional info
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP agent	fan.discovery

Item prototypes for FAN Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP agent	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Fan status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The status of fan

SNMP agent

sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]

Trigger prototypes for FAN Discovery

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: #{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath by SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	Average

LLD rule PSU Discovery

Name	Description	Type	Key and additional info
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP agent	psu.discovery

Item prototypes for PSU Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP agent	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Power supply status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The status of power supply

SNMP agent

sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]

Trigger prototypes for PSU Discovery

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: #{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath by SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	Average

LLD rule Network interfaces discovery

Name	Description	Type	Key and additional info
Network interfaces discovery	Discovering interfaces from IF-MIB.	SNMP agent	net.if.discovery

Item prototypes for Network interfaces discovery

Name	Description	Type	Key and additional info
Interface {#IFNAME}({#IFALIAS}): Operational status	MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.	SNMP agent	net.if.status[ifOperStatus.{#SNMPINDEX}]
Interface {#IFNAME}({#IFALIAS}): Bits received	MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing Change per second Custom multiplier: `8`
Interface {#IFNAME}({#IFALIAS}): Bits sent	MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing Change per second Custom multiplier: `8`
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded	MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded	MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Interface type	MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMP agent	net.if.type[ifType.{#SNMPINDEX}] Preprocessing Discard unchanged with heartbeat: `1d`
Interface {#IFNAME}({#IFALIAS}): Speed	MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of` n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.	SNMP agent	net.if.speed[ifHighSpeed.{#SNMPINDEX}] Preprocessing Custom multiplier: `1000000` Discard unchanged with heartbeat: `1h`

Trigger prototypes for Network interfaces discovery

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): Link down	This trigger expression works as follows: 1. It can be triggered if the operations status is down. 2. `{$IFCONTROL:"{#IFNAME}"}=1` - a user can redefine the context macro to "0", marking this interface as not important. No new trigger will be fired if this interface is down. 3. `{TEMPLATE_NAME:METRIC.diff()}=1` - the trigger fires only if the operational status was up to (1) sometime before (so, does not fire for "eternal off" interfaces.) WARNING: if closed manually - it will not fire again on the next poll, because of .diff.	`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))`	Average	Manual close: Yes
Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): High bandwidth usage	The utilization of the network interface is close to its estimated maximum bandwidth.	`(avg(/Netgear Fastpath by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Netgear Fastpath by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0`	Warning	Manual close: Yes Depends on: Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): Link down
Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): High error rate	It recovers when it is below 80% of the `{$IF.ERRORS.WARN:"{#IFNAME}"}` threshold.	`min(/Netgear Fastpath by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Netgear Fastpath by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`	Warning	Manual close: Yes Depends on: Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): Link down
Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before	This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.	change(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)	Info	Manual close: Yes Depends on: Netgear Fastpath: Interface {#IFNAME}({#IFALIAS}): Link down

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

This template is for Zabbix version: 6.4

Also available for: 7.0 6.2 6.0 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/6.4

Netgear Fastpath by SNMP

Overview

https://kb.netgear.com/24352/MIBs-for-Smart-switches

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Netgear M5300-28G

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}		`90`
{$TEMP_CRIT}		`60`
{$TEMP_CRIT_LOW}		`5`
{$TEMP_WARN}		`50`
{$TEMP_WARN_STATUS}		`2`
{$TEMP_CRIT_STATUS}		`3`
{$PSU_CRIT_STATUS:"failed"}		`2`
{$FAN_CRIT_STATUS:"failed"}		`2`
{$MEMORY.UTIL.MAX}		`90`
{$SNMP.TIMEOUT}		`5m`
{$ICMP_LOSS_WARN}		`20`
{$ICMP_RESPONSE_TIME_WARN}		`0.15`
{$IF.ERRORS.WARN}		`2`
{$IF.UTIL.MAX}		`90`
{$IFCONTROL}		`1`
{$NET.IF.IFNAME.MATCHES}		`^.*$`
{$NET.IF.IFNAME.NOT_MATCHES}	Filter out loopbacks, nulls, docker veth links and docker0 bridge by default	`Macro too long. Please see the template.`
{$NET.IF.IFOPERSTATUS.MATCHES}		`^.*$`
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}	Ignore notPresent(6)	`^6$`
{$NET.IF.IFADMINSTATUS.MATCHES}		`^.*`
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}	Ignore down(2) administrative status	`^2$`
{$NET.IF.IFDESCR.MATCHES}		`.*`
{$NET.IF.IFDESCR.NOT_MATCHES}		`CHANGE_IF_NEEDED`
{$NET.IF.IFALIAS.MATCHES}		`.*`
{$NET.IF.IFALIAS.NOT_MATCHES}		`CHANGE_IF_NEEDED`
{$NET.IF.IFTYPE.MATCHES}		`.*`
{$NET.IF.IFTYPE.NOT_MATCHES}		`CHANGE_IF_NEEDED`

Items

Name	Description	Type	Key and additional info
Netgear Fastpath: CPU utilization	MIB: FASTPATH-SWITCHING-MIB The CPU utilization expressed in %.	SNMP agent	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing Regular expression: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Netgear Fastpath: Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP agent	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Netgear Fastpath: Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP agent	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Netgear Fastpath: Memory utilization	Memory utilization in %.	Calculated	vm.memory.util[memoryUsedPercentage.0]
Netgear Fastpath: Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP agent	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing Discard unchanged with heartbeat: `1d`
Netgear Fastpath: Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP agent	system.hw.model Preprocessing Discard unchanged with heartbeat: `1d`
Netgear Fastpath: Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP agent	system.hw.serialnumber Preprocessing Discard unchanged with heartbeat: `1d`
Netgear Fastpath: Uptime (network)	MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	system.net.uptime[sysUpTime.0] Preprocessing Custom multiplier: `0.01`
Netgear Fastpath: Uptime (hardware)	MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	system.hw.uptime[hrSystemUptime.0] Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Netgear Fastpath: SNMP traps (fallback)	The item is used to collect all SNMP traps unmatched by other snmptrap items	SNMP trap	snmptrap.fallback
Netgear Fastpath: System location	MIB: SNMPv2-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.	SNMP agent	system.location[sysLocation.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System contact details	MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.	SNMP agent	system.contact[sysContact.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System object ID	MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.	SNMP agent	system.objectid[sysObjectID.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System name	MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.	SNMP agent	system.name Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System description	MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.	SNMP agent	system.descr[sysDescr.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: SNMP agent availability	Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible value: 0 - not available 1 - available 2 - unknown	Zabbix internal	zabbix[host,snmp,available]
Netgear Fastpath: ICMP ping		Simple check	icmpping
Netgear Fastpath: ICMP loss		Simple check	icmppingloss
Netgear Fastpath: ICMP response time		Simple check	icmppingsec

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: High CPU utilization	The CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath by SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	Warning
Netgear Fastpath: High memory utilization	The system is running out of free memory.	`min(/Netgear Fastpath by SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	Average
Netgear Fastpath: Operating system description has changed	The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	Info	Manual close: Yes Depends on: Netgear Fastpath: System name has changed
Netgear Fastpath: Device has been replaced	Device serial number has changed. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath by SNMP/system.hw.serialnumber))>0`	Info	Manual close: Yes
Netgear Fastpath: Host has been restarted	Uptime is less than 10 minutes.	`(last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Netgear Fastpath by SNMP/system.net.uptime[sysUpTime.0])<10m)`	Warning	Manual close: Yes Depends on: Netgear Fastpath: No SNMP data collection
Netgear Fastpath: System name has changed	The name of the system has changed. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.name,#1)<>last(/Netgear Fastpath by SNMP/system.name,#2) and length(last(/Netgear Fastpath by SNMP/system.name))>0`	Info	Manual close: Yes
Netgear Fastpath: No SNMP data collection	SNMP is not available for polling. Please check device connectivity and SNMP settings.	`max(/Netgear Fastpath by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`	Warning	Depends on: Netgear Fastpath: Unavailable by ICMP ping
Netgear Fastpath: Unavailable by ICMP ping	Last three attempts returned timeout. Please check device connectivity.	`max(/Netgear Fastpath by SNMP/icmpping,#3)=0`	High
Netgear Fastpath: High ICMP ping loss		`min(/Netgear Fastpath by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Netgear Fastpath by SNMP/icmppingloss,5m)<100`	Warning	Depends on: Netgear Fastpath: Unavailable by ICMP ping
Netgear Fastpath: High ICMP ping response time		`avg(/Netgear Fastpath by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`	Warning	Depends on: Netgear Fastpath: High ICMP ping loss Netgear Fastpath: Unavailable by ICMP ping

LLD rule Temperature Discovery

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP agent	temp.discovery

Item prototypes for Temperature Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP agent	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP agent	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Temperature

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The temperature value reported by sensor

SNMP agent

sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]

#{#SNMPVALUE}: Temperature status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The state of temperature sensor

SNMP agent

sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Trigger prototypes for Temperature Discovery

Name	Description	Expression	Severity	Dependencies and additional info
#{#SNMPVALUE}: Temperature is above warning threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}`	Warning	Depends on: #{#SNMPVALUE}: Temperature is above critical threshold
#{#SNMPVALUE}: Temperature is above critical threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}`	High
#{#SNMPVALUE}: Temperature is too low		`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}`	Average

LLD rule FAN Discovery

Name	Description	Type	Key and additional info
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP agent	fan.discovery

Item prototypes for FAN Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP agent	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Fan status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The status of fan

SNMP agent

sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]

Trigger prototypes for FAN Discovery

Name	Description	Expression	Severity	Dependencies and additional info
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath by SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	Average

LLD rule PSU Discovery

Name	Description	Type	Key and additional info
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP agent	psu.discovery

Item prototypes for PSU Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP agent	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Power supply status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The status of power supply

SNMP agent

sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]

Trigger prototypes for PSU Discovery

Name	Description	Expression	Severity	Dependencies and additional info
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath by SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	Average

LLD rule Network interfaces discovery

Name	Description	Type	Key and additional info
Network interfaces discovery	Discovering interfaces from IF-MIB.	SNMP agent	net.if.discovery

Item prototypes for Network interfaces discovery

Name	Description	Type	Key and additional info
Interface {#IFNAME}({#IFALIAS}): Operational status	MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.	SNMP agent	net.if.status[ifOperStatus.{#SNMPINDEX}]
Interface {#IFNAME}({#IFALIAS}): Bits received	MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing Change per second Custom multiplier: `8`
Interface {#IFNAME}({#IFALIAS}): Bits sent	MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing Change per second Custom multiplier: `8`
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded	MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded	MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Interface type	MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMP agent	net.if.type[ifType.{#SNMPINDEX}] Preprocessing Discard unchanged with heartbeat: `1d`
Interface {#IFNAME}({#IFALIAS}): Speed	MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of` n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.	SNMP agent	net.if.speed[ifHighSpeed.{#SNMPINDEX}] Preprocessing Custom multiplier: `1000000` Discard unchanged with heartbeat: `1h`

Trigger prototypes for Network interfaces discovery

Name	Description	Expression	Severity	Dependencies and additional info
Interface {#IFNAME}({#IFALIAS}): Link down	This trigger expression works as follows: 1. It can be triggered if the operations status is down. 2. `{$IFCONTROL:"{#IFNAME}"}=1` - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down. 3. `{TEMPLATE_NAME:METRIC.diff()}=1` - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.) WARNING: if closed manually - it will not fire again on the next poll, because of .diff.	`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))`	Average	Manual close: Yes
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage	The utilization of the network interface is close to its estimated maximum bandwidth.	`(avg(/Netgear Fastpath by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Netgear Fastpath by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0`	Warning	Manual close: Yes Depends on: Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): High error rate	It recovers when it is below 80% of the `{$IF.ERRORS.WARN:"{#IFNAME}"}` threshold.	`min(/Netgear Fastpath by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Netgear Fastpath by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`	Warning	Manual close: Yes Depends on: Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before	This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.	change(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)	Info	Manual close: Yes Depends on: Interface {#IFNAME}({#IFALIAS}): Link down

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

This template is for Zabbix version: 6.2

Also available for: 7.0 6.4 6.0 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/6.2

Netgear Fastpath by SNMP

Overview

For Zabbix version: 6.2 and higher. https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$ICMP_LOSS_WARN}	-	`20`
{$ICMP_RESPONSE_TIME_WARN}	-	`0.15`
{$IF.ERRORS.WARN}	-	`2`
{$IF.UTIL.MAX}	-	`90`
{$IFCONTROL}	-	`1`
{$MEMORY.UTIL.MAX}	-	`90`
{$NET.IF.IFADMINSTATUS.MATCHES}	Ignore notPresent(6)	`^.*`
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}	Ignore down(2) administrative status	`^2$`
{$NET.IF.IFALIAS.MATCHES}	-	`.*`
{$NET.IF.IFALIAS.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$NET.IF.IFDESCR.MATCHES}	-	`.*`
{$NET.IF.IFDESCR.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$NET.IF.IFNAME.MATCHES}	-	`^.*$`
{$NET.IF.IFNAME.NOT_MATCHES}	Filter out loopbacks, nulls, docker veth links and docker0 bridge by default	`(^Software Loopback Interface
{$NET.IF.IFOPERSTATUS.MATCHES}	-	`^.*$`
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}	Ignore notPresent(6)	`^6$`
{$NET.IF.IFTYPE.MATCHES}	-	`.*`
{$NET.IF.IFTYPE.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$SNMP.TIMEOUT}	-	`5m`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

There are no template links in this template.

Discovery rules

Name	Description	Type	Key and additional info
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
Network interfaces discovery	Discovering interfaces from IF-MIB.	SNMP	net.if.discovery Filter: AND - {#IFADMINSTATUS} MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.MATCHES}` - {#IFADMINSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.NOT_MATCHES}` - {#IFOPERSTATUS} MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.MATCHES}` - {#IFOPERSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.NOT_MATCHES}` - {#IFNAME} MATCHES_REGEX `{$NET.IF.IFNAME.MATCHES}` - {#IFNAME} NOT_MATCHES_REGEX `{$NET.IF.IFNAME.NOT_MATCHES}` - {#IFDESCR} MATCHES_REGEX `{$NET.IF.IFDESCR.MATCHES}` - {#IFDESCR} NOT_MATCHES_REGEX `{$NET.IF.IFDESCR.NOT_MATCHES}` - {#IFALIAS} MATCHES_REGEX `{$NET.IF.IFALIAS.MATCHES}` - {#IFALIAS} NOT_MATCHES_REGEX `{$NET.IF.IFALIAS.NOT_MATCHES}` - {#IFTYPE} MATCHES_REGEX `{$NET.IF.IFTYPE.MATCHES}` - {#IFTYPE} NOT_MATCHES_REGEX `{$NET.IF.IFTYPE.NOT_MATCHES}`
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %.	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
General	SNMP traps (fallback)	The item is used to collect all SNMP traps unmatched by other snmptrap items	SNMP_TRAP	snmptrap.fallback
General	System location	MIB: SNMPv2-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.	SNMP	system.location[sysLocation.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System contact details	MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.	SNMP	system.contact[sysContact.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System object ID	MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.	SNMP	system.objectid[sysObjectID.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System name	MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.	SNMP	system.name Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System description	MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.	SNMP	system.descr[sysDescr.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %.	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])-last(//vm.memory.available[agentSwitchCpuProcessMemFree.0]))/last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])*100`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Operational status	MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.	SNMP	net.if.status[ifOperStatus.{#SNMPINDEX}]
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Bits received	MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND - MULTIPLIER: `8`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Bits sent	MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND - MULTIPLIER: `8`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded	MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded	MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Interface type	MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMP	net.if.type[ifType.{#SNMPINDEX}] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Speed	MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of` n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.	SNMP	net.if.speed[ifHighSpeed.{#SNMPINDEX}] Preprocessing: - MULTIPLIER: `1000000` - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Power supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Status	Uptime (network)	MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	system.net.uptime[sysUpTime.0] Preprocessing: - MULTIPLIER: `0.01`
Status	Uptime (hardware)	MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	system.hw.uptime[hrSystemUptime.0] Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	SNMP agent availability	Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible value: 0 - not available 1 - available 2 - unknown	INTERNAL	zabbix[host,snmp,available]
Status	ICMP ping	-	SIMPLE	icmpping
Status	ICMP loss	-	SIMPLE	icmppingloss
Status	ICMP response time	-	SIMPLE	icmppingsec
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization	CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath by SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath by SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
System name has changed	System name has changed. Ack to close.	`last(/Netgear Fastpath by SNMP/system.name,#1)<>last(/Netgear Fastpath by SNMP/system.name,#2) and length(last(/Netgear Fastpath by SNMP/system.name))>0`	INFO	Manual close: YES
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	INFO	Manual close: YES Depends on: - System name has changed
Device has been replaced	Device serial number has changed. Ack to close	`last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath by SNMP/system.hw.serialnumber))>0`	INFO	Manual close: YES
High memory utilization	The system is running out of free memory.	`min(/Netgear Fastpath by SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	AVERAGE
Interface {#IFNAME}({#IFALIAS}): Link down	This trigger expression works as follows: 1. Can be triggered if operations status is down. 2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down. 3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.) WARNING: if closed manually - won't fire again on next poll, because of .diff.	`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))` Recovery expression: `last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0`	AVERAGE	Manual close: YES
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage	The network interface utilization is close to its estimated maximum bandwidth.	`(avg(/Netgear Fastpath by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Netgear Fastpath by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0` Recovery expression: `avg(/Netgear Fastpath by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/Netgear Fastpath by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])`	WARNING	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): High error rate	Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold	`min(/Netgear Fastpath by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Netgear Fastpath by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}` Recovery expression: `max(/Netgear Fastpath by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}0.8 and max(/Netgear Fastpath by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}0.8`	WARNING	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before	This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.	change(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) Recovery expression: `(change(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)`	INFO	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath by SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
Host has been restarted	Uptime is less than 10 minutes.	`(last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Netgear Fastpath by SNMP/system.net.uptime[sysUpTime.0])<10m)`	WARNING	Manual close: YES Depends on: - No SNMP data collection
No SNMP data collection	SNMP is not available for polling. Please check device connectivity and SNMP settings.	`max(/Netgear Fastpath by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`	WARNING	Depends on: - Unavailable by ICMP ping
Unavailable by ICMP ping	Last three attempts returned timeout. Please check device connectivity.	`max(/Netgear Fastpath by SNMP/icmpping,#3)=0`	HIGH
High ICMP ping loss	-	`min(/Netgear Fastpath by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Netgear Fastpath by SNMP/icmppingloss,5m)<100`	WARNING	Depends on: - Unavailable by ICMP ping
High ICMP ping response time	-	`avg(/Netgear Fastpath by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`	WARNING	Depends on: - High ICMP ping loss - Unavailable by ICMP ping
#{#SNMPVALUE}: Temperature is above warning threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}` Recovery expression: `max(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SNMPVALUE}"}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold
#{#SNMPVALUE}: Temperature is above critical threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}` Recovery expression: `max(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SNMPVALUE}"}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low	-	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}` Recovery expression: `min(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com.

This template is for Zabbix version: 6.0

Also available for: 7.0 6.4 6.2 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/6.0

Netgear Fastpath by SNMP

Overview

https://kb.netgear.com/24352/MIBs-for-Smart-switches

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Netgear M5300-28G

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}		`90`
{$TEMP_CRIT}		`60`
{$TEMP_CRIT_LOW}		`5`
{$TEMP_WARN}		`50`
{$TEMP_WARN_STATUS}		`2`
{$TEMP_CRIT_STATUS}		`3`
{$PSU_CRIT_STATUS:"failed"}		`2`
{$FAN_CRIT_STATUS:"failed"}		`2`
{$MEMORY.UTIL.MAX}		`90`
{$SNMP.TIMEOUT}		`5m`
{$ICMP_LOSS_WARN}		`20`
{$ICMP_RESPONSE_TIME_WARN}		`0.15`
{$IF.ERRORS.WARN}		`2`
{$IF.UTIL.MAX}		`90`
{$IFCONTROL}		`1`
{$NET.IF.IFNAME.MATCHES}		`^.*$`
{$NET.IF.IFNAME.NOT_MATCHES}	Filter out loopbacks, nulls, docker veth links and docker0 bridge by default	`Macro too long. Please see the template.`
{$NET.IF.IFOPERSTATUS.MATCHES}		`^.*$`
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}	Ignore notPresent(6)	`^6$`
{$NET.IF.IFADMINSTATUS.MATCHES}		`^.*`
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}	Ignore down(2) administrative status	`^2$`
{$NET.IF.IFDESCR.MATCHES}		`.*`
{$NET.IF.IFDESCR.NOT_MATCHES}		`CHANGE_IF_NEEDED`
{$NET.IF.IFALIAS.MATCHES}		`.*`
{$NET.IF.IFALIAS.NOT_MATCHES}		`CHANGE_IF_NEEDED`
{$NET.IF.IFTYPE.MATCHES}		`.*`
{$NET.IF.IFTYPE.NOT_MATCHES}		`CHANGE_IF_NEEDED`

Items

Name	Description	Type	Key and additional info
Netgear Fastpath: CPU utilization	MIB: FASTPATH-SWITCHING-MIB The CPU utilization expressed in %.	SNMP agent	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing Regular expression: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Netgear Fastpath: Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP agent	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Netgear Fastpath: Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP agent	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Netgear Fastpath: Memory utilization	Memory utilization in %.	Calculated	vm.memory.util[memoryUsedPercentage.0]
Netgear Fastpath: Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP agent	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing Discard unchanged with heartbeat: `1d`
Netgear Fastpath: Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP agent	system.hw.model Preprocessing Discard unchanged with heartbeat: `1d`
Netgear Fastpath: Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP agent	system.hw.serialnumber Preprocessing Discard unchanged with heartbeat: `1d`
Netgear Fastpath: Uptime (network)	MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	system.net.uptime[sysUpTime.0] Preprocessing Custom multiplier: `0.01`
Netgear Fastpath: Uptime (hardware)	MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	system.hw.uptime[hrSystemUptime.0] Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Netgear Fastpath: SNMP traps (fallback)	The item is used to collect all SNMP traps unmatched by other snmptrap items	SNMP trap	snmptrap.fallback
Netgear Fastpath: System location	MIB: SNMPv2-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.	SNMP agent	system.location[sysLocation.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System contact details	MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.	SNMP agent	system.contact[sysContact.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System object ID	MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.	SNMP agent	system.objectid[sysObjectID.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System name	MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.	SNMP agent	system.name Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: System description	MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.	SNMP agent	system.descr[sysDescr.0] Preprocessing Discard unchanged with heartbeat: `12h`
Netgear Fastpath: SNMP agent availability	Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible value: 0 - not available 1 - available 2 - unknown	Zabbix internal	zabbix[host,snmp,available]
Netgear Fastpath: ICMP ping		Simple check	icmpping
Netgear Fastpath: ICMP loss		Simple check	icmppingloss
Netgear Fastpath: ICMP response time		Simple check	icmppingsec

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Netgear Fastpath: High CPU utilization	The CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath by SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	Warning
Netgear Fastpath: High memory utilization	The system is running out of free memory.	`min(/Netgear Fastpath by SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	Average
Netgear Fastpath: Operating system description has changed	The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath by SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	Info	Manual close: Yes Depends on: Netgear Fastpath: System name has changed
Netgear Fastpath: Device has been replaced	Device serial number has changed. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath by SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath by SNMP/system.hw.serialnumber))>0`	Info	Manual close: Yes
Netgear Fastpath: Host has been restarted	Uptime is less than 10 minutes.	`(last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Netgear Fastpath by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Netgear Fastpath by SNMP/system.net.uptime[sysUpTime.0])<10m)`	Warning	Manual close: Yes Depends on: Netgear Fastpath: No SNMP data collection
Netgear Fastpath: System name has changed	The name of the system has changed. Acknowledge to close the problem manually.	`last(/Netgear Fastpath by SNMP/system.name,#1)<>last(/Netgear Fastpath by SNMP/system.name,#2) and length(last(/Netgear Fastpath by SNMP/system.name))>0`	Info	Manual close: Yes
Netgear Fastpath: No SNMP data collection	SNMP is not available for polling. Please check device connectivity and SNMP settings.	`max(/Netgear Fastpath by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`	Warning	Depends on: Netgear Fastpath: Unavailable by ICMP ping
Netgear Fastpath: Unavailable by ICMP ping	Last three attempts returned timeout. Please check device connectivity.	`max(/Netgear Fastpath by SNMP/icmpping,#3)=0`	High
Netgear Fastpath: High ICMP ping loss		`min(/Netgear Fastpath by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Netgear Fastpath by SNMP/icmppingloss,5m)<100`	Warning	Depends on: Netgear Fastpath: Unavailable by ICMP ping
Netgear Fastpath: High ICMP ping response time		`avg(/Netgear Fastpath by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`	Warning	Depends on: Netgear Fastpath: High ICMP ping loss Netgear Fastpath: Unavailable by ICMP ping

LLD rule Temperature Discovery

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP agent	temp.discovery

Item prototypes for Temperature Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP agent	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP agent	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Temperature

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The temperature value reported by sensor

SNMP agent

sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]

#{#SNMPVALUE}: Temperature status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The state of temperature sensor

SNMP agent

sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Trigger prototypes for Temperature Discovery

Name	Description	Expression	Severity	Dependencies and additional info
#{#SNMPVALUE}: Temperature is above warning threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}`	Warning	Depends on: #{#SNMPVALUE}: Temperature is above critical threshold
#{#SNMPVALUE}: Temperature is above critical threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Netgear Fastpath by SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}`	High
#{#SNMPVALUE}: Temperature is too low		`avg(/Netgear Fastpath by SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}`	Average

LLD rule FAN Discovery

Name	Description	Type	Key and additional info
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP agent	fan.discovery

Item prototypes for FAN Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP agent	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Fan status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The status of fan

SNMP agent

sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]

Trigger prototypes for FAN Discovery

Name	Description	Expression	Severity	Dependencies and additional info
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath by SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	Average

LLD rule PSU Discovery

Name	Description	Type	Key and additional info
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP agent	psu.discovery

Item prototypes for PSU Discovery

Name	Description	Type	Key and additional info
#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP agent	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]

Name

Description

Type

Key and additional info

#{#SNMPVALUE}: Power supply status

MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB

The status of power supply

SNMP agent

sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]

Trigger prototypes for PSU Discovery

Name	Description	Expression	Severity	Dependencies and additional info
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath by SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	Average

LLD rule Network interfaces discovery

Name	Description	Type	Key and additional info
Network interfaces discovery	Discovering interfaces from IF-MIB.	SNMP agent	net.if.discovery

Item prototypes for Network interfaces discovery

Name	Description	Type	Key and additional info
Interface {#IFNAME}({#IFALIAS}): Operational status	MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.	SNMP agent	net.if.status[ifOperStatus.{#SNMPINDEX}]
Interface {#IFNAME}({#IFALIAS}): Bits received	MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing Change per second Custom multiplier: `8`
Interface {#IFNAME}({#IFALIAS}): Bits sent	MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing Change per second Custom multiplier: `8`
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded	MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded	MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP agent	net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing Change per second
Interface {#IFNAME}({#IFALIAS}): Interface type	MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMP agent	net.if.type[ifType.{#SNMPINDEX}] Preprocessing Discard unchanged with heartbeat: `1d`
Interface {#IFNAME}({#IFALIAS}): Speed	MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of` n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.	SNMP agent	net.if.speed[ifHighSpeed.{#SNMPINDEX}] Preprocessing Custom multiplier: `1000000` Discard unchanged with heartbeat: `1h`

Trigger prototypes for Network interfaces discovery

Name	Description	Expression	Severity	Dependencies and additional info
Interface {#IFNAME}({#IFALIAS}): Link down	This trigger expression works as follows: 1. It can be triggered if the operations status is down. 2. `{$IFCONTROL:"{#IFNAME}"}=1` - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down. 3. `{TEMPLATE_NAME:METRIC.diff()}=1` - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.) WARNING: if closed manually - it will not fire again on the next poll, because of .diff.	`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))`	Average	Manual close: Yes
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage	The utilization of the network interface is close to its estimated maximum bandwidth.	`(avg(/Netgear Fastpath by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Netgear Fastpath by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0`	Warning	Manual close: Yes Depends on: Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): High error rate	It recovers when it is below 80% of the `{$IF.ERRORS.WARN:"{#IFNAME}"}` threshold.	`min(/Netgear Fastpath by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Netgear Fastpath by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}`	Warning	Manual close: Yes Depends on: Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before	This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.	change(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Netgear Fastpath by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Netgear Fastpath by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Netgear Fastpath by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)	Info	Manual close: Yes Depends on: Interface {#IFNAME}({#IFALIAS}): Link down

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

This template is for Zabbix version: 5.4

Also available for: 7.0 6.4 6.2 6.0 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/5.4

Netgear Fastpath SNMP

Overview

For Zabbix version: 5.4 and higher
https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$MEMORY.UTIL.MAX}	-	`90`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

Name
Generic SNMP
Interfaces SNMP

Discovery rules

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])-last(//vm.memory.available[agentSwitchCpuProcessMemFree.0]))/last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])*100`
Power_supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m)	CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	INFO	Manual close: YES
Device has been replaced (new serial number received)	Device serial number has changed. Ack to close	`last(/Netgear Fastpath SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath SNMP/system.hw.serialnumber))>0`	INFO	Manual close: YES
High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m)	The system is running out of free memory.	`min(/Netgear Fastpath SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	AVERAGE
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
#{#SNMPVALUE}: Temperature is above warning threshold: >{$TEMP_WARN:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:""} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_WARN:""}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}
#{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:""} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT:""}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low: <{$TEMP_CRIT_LOW:""}	-	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:""}` Recovery expression: `min(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:""}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

This template is for Zabbix version: 5.0

Also available for: 7.0 6.4 6.2 6.0 5.4

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/5.0

Template Net Netgear Fastpath SNMP

Overview

For Zabbix version: 5.0 and higher
https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$MEMORY.UTIL.MAX}	-	`90`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

Name
Generic SNMP
Interfaces SNMP

Discovery rules

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last("vm.memory.total[agentSwitchCpuProcessMemAvailable.0]")-last("vm.memory.available[agentSwitchCpuProcessMemFree.0]"))/last("vm.memory.total[agentSwitchCpuProcessMemAvailable.0]")*100`
Power_supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m)	CPU utilization is too high. The system might be slow to respond.	`{TEMPLATE_NAME:system.cpu.util[agentSwitchCpuProcessTotalUtilization.0].min(5m)}>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`{TEMPLATE_NAME:sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}].count(#1,{$FAN_CRIT_STATUS:"failed"},eq)}=1`	AVERAGE
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`{TEMPLATE_NAME:system.sw.os[agentInventoryOperatingSystem.0].diff()}=1 and {TEMPLATE_NAME:system.sw.os[agentInventoryOperatingSystem.0].strlen()}>0`	INFO	Manual close: YES
Device has been replaced (new serial number received)	Device serial number has changed. Ack to close	`{TEMPLATE_NAME:system.hw.serialnumber.diff()}=1 and {TEMPLATE_NAME:system.hw.serialnumber.strlen()}>0`	INFO	Manual close: YES
High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m)	The system is running out of free memory.	`{TEMPLATE_NAME:vm.memory.util[memoryUsedPercentage.0].min(5m)}>{$MEMORY.UTIL.MAX}`	AVERAGE
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`{TEMPLATE_NAME:sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}].count(#1,{$PSU_CRIT_STATUS:"failed"},eq)}=1`	AVERAGE
#{#SNMPVALUE}: Temperature is above warning threshold: >{$TEMP_WARN:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].avg(5m)}>{$TEMP_WARN:""} or {TEMPLATE_NAME:sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}].last()}={$TEMP_WARN_STATUS}` Recovery expression: `{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].max(5m)}<{$TEMP_WARN:""}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}
#{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].avg(5m)}>{$TEMP_CRIT:""} or {TEMPLATE_NAME:sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}].last()}={$TEMP_CRIT_STATUS}` Recovery expression: `{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].max(5m)}<{$TEMP_CRIT:""}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low: <{$TEMP_CRIT_LOW:""}	-	`{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].avg(5m)}<{$TEMP_CRIT_LOW:""}` Recovery expression: `{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].min(5m)}>{$TEMP_CRIT_LOW:""}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

Link	Source	Compatibility
Netgear_WG103 Template for Netgear WG103 access point.Works with Zabbix 2.4.7 and a Netgear WG103 FW 2.2.5.Contains :Basic information such as : FWversion, S/N, APname, MACLAN, MACWLANInterfaces traffic (LAN and WLAN)Wifi profiles namesCurrent users number connected to the AP template_netgear_wg103	GitHub Community Templates	5.0+
Netgear GS110TP Template for Netgear GS110TP using SNMP.Probably needs to be improved (no triggers).Community used is "public" template_netgear_gs110tp	GitHub Community Templates	5.0+
Template SNMP ReadyNas template_zabbix_2.2_readynas_snmp	GitHub Community Templates	5.0+
SNMP ReadyNAS Tega Template is based on MIB http://www.downloads.netgear.com/files/ReadyNAS/READYNAS-MIB.txt.LLD of disks.It monitors:Disks temperature in Celsius. There is a triggerDisks state. There is triggerVolume state. There is triggerVolume size, free space. There is triggerAnd other.For tuning of a template macros ... template_snmp_readynas_tega	GitHub Community Templates	5.0+
Template SNMP ReadyNas template_snmp_readynas	GitHub Community Templates	5.0+
Template SNMP ReadyNAS template_readynas_monitor_via_snmp	GitHub Community Templates	5.0+
SNMP ReadyNas 3200 template_readynas_3200_snmp	GitHub Community Templates	5.0+

Podívejte se na Zabbix demo video

Get Zabbix Cloud today

Get Zabbix Cloud today

Get Zabbix Cloud today

Get Zabbix Cloud today

Get Zabbix Cloud today

Zabbix + Netgear

Netgear

Dostupná řešení

Netgear Fastpath by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Temperature Discovery

Item prototypes for Temperature Discovery

Trigger prototypes for Temperature Discovery

LLD rule FAN Discovery

Item prototypes for FAN Discovery

Trigger prototypes for FAN Discovery

LLD rule PSU Discovery

Item prototypes for PSU Discovery

Trigger prototypes for PSU Discovery

LLD rule Network interfaces discovery

Item prototypes for Network interfaces discovery

Trigger prototypes for Network interfaces discovery

Feedback

Netgear Fastpath by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Temperature Discovery

Item prototypes for Temperature Discovery

Trigger prototypes for Temperature Discovery

LLD rule FAN Discovery

Item prototypes for FAN Discovery

Trigger prototypes for FAN Discovery

LLD rule PSU Discovery

Item prototypes for PSU Discovery

Trigger prototypes for PSU Discovery

LLD rule Network interfaces discovery

Item prototypes for Network interfaces discovery

Trigger prototypes for Network interfaces discovery

Feedback

Netgear Fastpath by SNMP

Overview

Setup

Zabbix configuration

Macros used

Template links

Discovery rules

Items collected

Triggers

Feedback

Netgear Fastpath by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Temperature Discovery

Item prototypes for Temperature Discovery

Trigger prototypes for Temperature Discovery

LLD rule FAN Discovery

Item prototypes for FAN Discovery

Trigger prototypes for FAN Discovery

LLD rule PSU Discovery

Item prototypes for PSU Discovery