Available solutions

Template Netgear Fastpath SNMP
3rd party solutions

This template is for Zabbix version: 6.2

Also available for: 6.0 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/6.2

Netgear Fastpath SNMP

Overview

For Zabbix version: 6.2 and higher
https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$ICMP_LOSS_WARN}	-	`20`
{$ICMP_RESPONSE_TIME_WARN}	-	`0.15`
{$IF.ERRORS.WARN}	-	`2`
{$IF.UTIL.MAX}	-	`90`
{$IFCONTROL}	-	`1`
{$MEMORY.UTIL.MAX}	-	`90`
{$NET.IF.IFADMINSTATUS.MATCHES}	Ignore notPresent(6)	`^.*`
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}	Ignore down(2) administrative status	`^2$`
{$NET.IF.IFALIAS.MATCHES}	-	`.*`
{$NET.IF.IFALIAS.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$NET.IF.IFDESCR.MATCHES}	-	`.*`
{$NET.IF.IFDESCR.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$NET.IF.IFNAME.MATCHES}	-	`^.*$`
{$NET.IF.IFNAME.NOT_MATCHES}	Filter out loopbacks, nulls, docker veth links and docker0 bridge by default	`(^Software Loopback Interface\|^NULL[0-9.]$\|^[Ll]o[0-9.]$\|^[Ss]ystem$\|^Nu[0-9.]*$\|^veth[0-9a-z]+$\|docker[0-9]+\|br-[a-z0-9]{12})`
{$NET.IF.IFOPERSTATUS.MATCHES}	-	`^.*$`
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}	Ignore notPresent(6)	`^6$`
{$NET.IF.IFTYPE.MATCHES}	-	`.*`
{$NET.IF.IFTYPE.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$SNMP.TIMEOUT}	-	`5m`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

There are no template links in this template.

Discovery rules

Name	Description	Type	Key and additional info
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
Network interfaces discovery	Discovering interfaces from IF-MIB.	SNMP	net.if.discovery Filter: AND - {#IFADMINSTATUS} MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.MATCHES}` - {#IFADMINSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.NOT_MATCHES}` - {#IFOPERSTATUS} MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.MATCHES}` - {#IFOPERSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.NOT_MATCHES}` - {#IFNAME} MATCHES_REGEX `{$NET.IF.IFNAME.MATCHES}` - {#IFNAME} NOT_MATCHES_REGEX `{$NET.IF.IFNAME.NOT_MATCHES}` - {#IFDESCR} MATCHES_REGEX `{$NET.IF.IFDESCR.MATCHES}` - {#IFDESCR} NOT_MATCHES_REGEX `{$NET.IF.IFDESCR.NOT_MATCHES}` - {#IFALIAS} MATCHES_REGEX `{$NET.IF.IFALIAS.MATCHES}` - {#IFALIAS} NOT_MATCHES_REGEX `{$NET.IF.IFALIAS.NOT_MATCHES}` - {#IFTYPE} MATCHES_REGEX `{$NET.IF.IFTYPE.MATCHES}` - {#IFTYPE} NOT_MATCHES_REGEX `{$NET.IF.IFTYPE.NOT_MATCHES}`
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %.	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
General	SNMP traps (fallback)	The item is used to collect all SNMP traps unmatched by other snmptrap items	SNMP_TRAP	snmptrap.fallback
General	System location	MIB: SNMPv2-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p> \|SNMP \|system.location[sysLocation.0]<p>Preprocessing:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:`12h`
General	System contact details	MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.	SNMP	system.contact[sysContact.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System object ID	MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.</p> \|SNMP \|system.objectid[sysObjectID.0]<p>Preprocessing:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:`12h`
General	System name	MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.	SNMP	system.name Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System description	MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.	SNMP	system.descr[sysDescr.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %.	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])-last(//vm.memory.available[agentSwitchCpuProcessMemFree.0]))/last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])*100`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Operational status	MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.	SNMP	net.if.status[ifOperStatus.{#SNMPINDEX}]
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Bits received	MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND - MULTIPLIER: `8`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Bits sent	MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND - MULTIPLIER: `8`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded	MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded	MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Interface type	MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMP	net.if.type[ifType.{#SNMPINDEX}] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Speed	MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of`n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p> \|SNMP \|net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>Preprocessing:</p><p>- MULTIPLIER:`1000000`</p><p>- DISCARD_UNCHANGED_HEARTBEAT:`1h`
Power supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Status	Uptime	MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	system.uptime[sysUpTime.0] Preprocessing: - MULTIPLIER: `0.01`
Status	SNMP agent availability	Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible value: 0 - not available 1 - available 2 - unknown	INTERNAL	zabbix[host,snmp,available]
Status	ICMP ping	-	SIMPLE	icmpping
Status	ICMP loss	-	SIMPLE	icmppingloss
Status	ICMP response time	-	SIMPLE	icmppingsec
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization	CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
System name has changed	System name has changed. Ack to close.	`last(/Netgear Fastpath SNMP/system.name,#1)<>last(/Netgear Fastpath SNMP/system.name,#2) and length(last(/Netgear Fastpath SNMP/system.name))>0`	INFO	Manual close: YES
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	INFO	Manual close: YES Depends on: - System name has changed
Device has been replaced	Device serial number has changed. Ack to close	`last(/Netgear Fastpath SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath SNMP/system.hw.serialnumber))>0`	INFO	Manual close: YES
High memory utilization	The system is running out of free memory.	`min(/Netgear Fastpath SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	AVERAGE
Interface {#IFNAME}({#IFALIAS}): Link down	This trigger expression works as follows: 1. Can be triggered if operations status is down. 2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down. 3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.) WARNING: if closed manually - won't fire again on next poll, because of .diff.	`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))` Recovery expression: `last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0`	AVERAGE	Manual close: YES
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage	The network interface utilization is close to its estimated maximum bandwidth.	`(avg(/Netgear Fastpath SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Netgear Fastpath SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0` Recovery expression: `avg(/Netgear Fastpath SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/Netgear Fastpath SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])`	WARNING	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): High error rate	Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold	`min(/Netgear Fastpath SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Netgear Fastpath SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}` Recovery expression: `max(/Netgear Fastpath SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}0.8 and max(/Netgear Fastpath SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}0.8`	WARNING	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before	This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.	change(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) Recovery expression: `(change(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)`	INFO	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
has been restarted	Uptime is less than 10 minutes.	`last(/Netgear Fastpath SNMP/system.uptime[sysUpTime.0])<10m`	WARNING	Manual close: YES Depends on: - No SNMP data collection
No SNMP data collection	SNMP is not available for polling. Please check device connectivity and SNMP settings.	`max(/Netgear Fastpath SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`	WARNING	Depends on: - Unavailable by ICMP ping
Unavailable by ICMP ping	Last three attempts returned timeout. Please check device connectivity.	`max(/Netgear Fastpath SNMP/icmpping,#3)=0`	HIGH
High ICMP ping loss	-	`min(/Netgear Fastpath SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Netgear Fastpath SNMP/icmppingloss,5m)<100`	WARNING	Depends on: - Unavailable by ICMP ping
High ICMP ping response time	-	`avg(/Netgear Fastpath SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`	WARNING	Depends on: - High ICMP ping loss - Unavailable by ICMP ping
#{#SNMPVALUE}: Temperature is above warning threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SNMPVALUE}"}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold
#{#SNMPVALUE}: Temperature is above critical threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SNMPVALUE}"}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low	-	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}` Recovery expression: `min(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

This template is for Zabbix version: 6.0

Also available for: 6.2 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/6.0

Netgear Fastpath SNMP

Overview

For Zabbix version: 6.0 and higher
https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$ICMP_LOSS_WARN}	-	`20`
{$ICMP_RESPONSE_TIME_WARN}	-	`0.15`
{$IF.ERRORS.WARN}	-	`2`
{$IF.UTIL.MAX}	-	`90`
{$IFCONTROL}	-	`1`
{$MEMORY.UTIL.MAX}	-	`90`
{$NET.IF.IFADMINSTATUS.MATCHES}	Ignore notPresent(6)	`^.*`
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}	Ignore down(2) administrative status	`^2$`
{$NET.IF.IFALIAS.MATCHES}	-	`.*`
{$NET.IF.IFALIAS.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$NET.IF.IFDESCR.MATCHES}	-	`.*`
{$NET.IF.IFDESCR.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$NET.IF.IFNAME.MATCHES}	-	`^.*$`
{$NET.IF.IFNAME.NOT_MATCHES}	Filter out loopbacks, nulls, docker veth links and docker0 bridge by default	`(^Software Loopback Interface\|^NULL[0-9.]$\|^[Ll]o[0-9.]$\|^[Ss]ystem$\|^Nu[0-9.]*$\|^veth[0-9a-z]+$\|docker[0-9]+\|br-[a-z0-9]{12})`
{$NET.IF.IFOPERSTATUS.MATCHES}	-	`^.*$`
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}	Ignore notPresent(6)	`^6$`
{$NET.IF.IFTYPE.MATCHES}	-	`.*`
{$NET.IF.IFTYPE.NOT_MATCHES}	-	`CHANGE_IF_NEEDED`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$SNMP.TIMEOUT}	-	`5m`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

There are no template links in this template.

Discovery rules

Name	Description	Type	Key and additional info
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
Network interfaces discovery	Discovering interfaces from IF-MIB.	SNMP	net.if.discovery Filter: AND - {#IFADMINSTATUS} MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.MATCHES}` - {#IFADMINSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFADMINSTATUS.NOT_MATCHES}` - {#IFOPERSTATUS} MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.MATCHES}` - {#IFOPERSTATUS} NOT_MATCHES_REGEX `{$NET.IF.IFOPERSTATUS.NOT_MATCHES}` - {#IFNAME} MATCHES_REGEX `{$NET.IF.IFNAME.MATCHES}` - {#IFNAME} NOT_MATCHES_REGEX `{$NET.IF.IFNAME.NOT_MATCHES}` - {#IFDESCR} MATCHES_REGEX `{$NET.IF.IFDESCR.MATCHES}` - {#IFDESCR} NOT_MATCHES_REGEX `{$NET.IF.IFDESCR.NOT_MATCHES}` - {#IFALIAS} MATCHES_REGEX `{$NET.IF.IFALIAS.MATCHES}` - {#IFALIAS} NOT_MATCHES_REGEX `{$NET.IF.IFALIAS.NOT_MATCHES}` - {#IFTYPE} MATCHES_REGEX `{$NET.IF.IFTYPE.MATCHES}` - {#IFTYPE} NOT_MATCHES_REGEX `{$NET.IF.IFTYPE.NOT_MATCHES}`
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %.	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
General	SNMP traps (fallback)	The item is used to collect all SNMP traps unmatched by other snmptrap items	SNMP_TRAP	snmptrap.fallback
General	System location	MIB: SNMPv2-MIB The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p> \|SNMP \|system.location[sysLocation.0]<p>Preprocessing:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:`12h`
General	System contact details	MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.	SNMP	system.contact[sysContact.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System object ID	MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.</p> \|SNMP \|system.objectid[sysObjectID.0]<p>Preprocessing:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:`12h`
General	System name	MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.	SNMP	system.name Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
General	System description	MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.	SNMP	system.descr[sysDescr.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `12h`
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %.	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])-last(//vm.memory.available[agentSwitchCpuProcessMemFree.0]))/last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])*100`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Operational status	MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.	SNMP	net.if.status[ifOperStatus.{#SNMPINDEX}]
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Bits received	MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND - MULTIPLIER: `8`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Bits sent	MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND - MULTIPLIER: `8`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors	MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded	MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded	MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.	SNMP	net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing: - CHANGE_PER_SECOND
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Interface type	MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.	SNMP	net.if.type[ifType.{#SNMPINDEX}] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Network interfaces	Interface {#IFNAME}({#IFALIAS}): Speed	MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of`n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p> \|SNMP \|net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>Preprocessing:</p><p>- MULTIPLIER:`1000000`</p><p>- DISCARD_UNCHANGED_HEARTBEAT:`1h`
Power supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Status	Uptime	MIB: SNMPv2-MIB The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	system.uptime[sysUpTime.0] Preprocessing: - MULTIPLIER: `0.01`
Status	SNMP agent availability	Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible value: 0 - not available 1 - available 2 - unknown	INTERNAL	zabbix[host,snmp,available]
Status	ICMP ping	-	SIMPLE	icmpping
Status	ICMP loss	-	SIMPLE	icmppingloss
Status	ICMP response time	-	SIMPLE	icmppingsec
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization	CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
System name has changed	System name has changed. Ack to close.	`last(/Netgear Fastpath SNMP/system.name,#1)<>last(/Netgear Fastpath SNMP/system.name,#2) and length(last(/Netgear Fastpath SNMP/system.name))>0`	INFO	Manual close: YES
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	INFO	Manual close: YES Depends on: - System name has changed
Device has been replaced	Device serial number has changed. Ack to close	`last(/Netgear Fastpath SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath SNMP/system.hw.serialnumber))>0`	INFO	Manual close: YES
High memory utilization	The system is running out of free memory.	`min(/Netgear Fastpath SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	AVERAGE
Interface {#IFNAME}({#IFALIAS}): Link down	This trigger expression works as follows: 1. Can be triggered if operations status is down. 2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down. 3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.) WARNING: if closed manually - won't fire again on next poll, because of .diff.	`{$IFCONTROL:"{#IFNAME}"}=1 and last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))` Recovery expression: `last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0`	AVERAGE	Manual close: YES
Interface {#IFNAME}({#IFALIAS}): High bandwidth usage	The network interface utilization is close to its estimated maximum bandwidth.	`(avg(/Netgear Fastpath SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Netgear Fastpath SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0` Recovery expression: `avg(/Netgear Fastpath SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/Netgear Fastpath SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])`	WARNING	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): High error rate	Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold	`min(/Netgear Fastpath SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Netgear Fastpath SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}` Recovery expression: `max(/Netgear Fastpath SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}0.8 and max(/Netgear Fastpath SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}0.8`	WARNING	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before	This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.	change(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Netgear Fastpath SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) Recovery expression: `(change(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Netgear Fastpath SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Netgear Fastpath SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)`	INFO	Manual close: YES Depends on: - Interface {#IFNAME}({#IFALIAS}): Link down
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
has been restarted	Uptime is less than 10 minutes.	`last(/Netgear Fastpath SNMP/system.uptime[sysUpTime.0])<10m`	WARNING	Manual close: YES Depends on: - No SNMP data collection
No SNMP data collection	SNMP is not available for polling. Please check device connectivity and SNMP settings.	`max(/Netgear Fastpath SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0`	WARNING	Depends on: - Unavailable by ICMP ping
Unavailable by ICMP ping	Last three attempts returned timeout. Please check device connectivity.	`max(/Netgear Fastpath SNMP/icmpping,#3)=0`	HIGH
High ICMP ping loss	-	`min(/Netgear Fastpath SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Netgear Fastpath SNMP/icmppingloss,5m)<100`	WARNING	Depends on: - Unavailable by ICMP ping
High ICMP ping response time	-	`avg(/Netgear Fastpath SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}`	WARNING	Depends on: - High ICMP ping loss - Unavailable by ICMP ping
#{#SNMPVALUE}: Temperature is above warning threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SNMPVALUE}"}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold
#{#SNMPVALUE}: Temperature is above critical threshold	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SNMPVALUE}"}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low	-	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}` Recovery expression: `min(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

This template is for Zabbix version: 5.4

Also available for: 6.2 6.0 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/5.4

Netgear Fastpath SNMP

Overview

For Zabbix version: 5.4 and higher
https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$MEMORY.UTIL.MAX}	-	`90`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

Name
Generic SNMP
Interfaces SNMP

Discovery rules

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])-last(//vm.memory.available[agentSwitchCpuProcessMemFree.0]))/last(//vm.memory.total[agentSwitchCpuProcessMemAvailable.0])*100`
Power_supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m)	CPU utilization is too high. The system might be slow to respond.	`min(/Netgear Fastpath SNMP/system.cpu.util[agentSwitchCpuProcessTotalUtilization.0],5m)>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`count(/Netgear Fastpath SNMP/sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#1)<>last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0],#2) and length(last(/Netgear Fastpath SNMP/system.sw.os[agentInventoryOperatingSystem.0]))>0`	INFO	Manual close: YES
Device has been replaced (new serial number received)	Device serial number has changed. Ack to close	`last(/Netgear Fastpath SNMP/system.hw.serialnumber,#1)<>last(/Netgear Fastpath SNMP/system.hw.serialnumber,#2) and length(last(/Netgear Fastpath SNMP/system.hw.serialnumber))>0`	INFO	Manual close: YES
High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m)	The system is running out of free memory.	`min(/Netgear Fastpath SNMP/vm.memory.util[memoryUsedPercentage.0],5m)>{$MEMORY.UTIL.MAX}`	AVERAGE
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`count(/Netgear Fastpath SNMP/sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"failed\"}")=1`	AVERAGE
#{#SNMPVALUE}: Temperature is above warning threshold: >{$TEMP_WARN:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:""} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_WARN_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_WARN:""}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}
#{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:""} or last(/Netgear Fastpath SNMP/sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}` Recovery expression: `max(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT:""}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low: <{$TEMP_CRIT_LOW:""}	-	`avg(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:""}` Recovery expression: `min(/Netgear Fastpath SNMP/sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:""}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

This template is for Zabbix version: 5.0

Also available for: 6.2 6.0 5.4

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/netgear_snmp?at=release/5.0

Template Net Netgear Fastpath SNMP

Overview

For Zabbix version: 5.0 and higher
https://kb.netgear.com/24352/MIBs-for-Smart-switches

This template was tested on:

Netgear M5300-28G

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$CPU.UTIL.CRIT}	-	`90`
{$FAN_CRIT_STATUS:"failed"}	-	`2`
{$MEMORY.UTIL.MAX}	-	`90`
{$PSU_CRIT_STATUS:"failed"}	-	`2`
{$TEMP_CRIT_LOW}	-	`5`
{$TEMP_CRIT_STATUS}	-	`3`
{$TEMP_CRIT}	-	`60`
{$TEMP_WARN_STATUS}	-	`2`
{$TEMP_WARN}	-	`50`

Template links

Name
Generic SNMP
Interfaces SNMP

Discovery rules

Name	Description	Type	Key and additional info
Temperature Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable	SNMP	temp.discovery
FAN Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::1.3.6.1.4.1.4526.10.43.1.6.1.1	SNMP	fan.discovery
PSU Discovery	FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex	SNMP	psu.discovery

Items collected

Group	Name	Description	Type	Key and additional info
CPU	CPU utilization	MIB: FASTPATH-SWITCHING-MIB CPU utilization in %	SNMP	system.cpu.util[agentSwitchCpuProcessTotalUtilization.0] Preprocessing: - REGEX: `60 Secs $ ([0-9\.]+)%$.+300 Secs \1`
Fans	#{#SNMPVALUE}: Fan status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of fan	SNMP	sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}]
Inventory	Operating system	MIB: FASTPATH-SWITCHING-MIB Operating System running on this unit	SNMP	system.sw.os[agentInventoryOperatingSystem.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware model name	MIB: FASTPATH-SWITCHING-MIB	SNMP	system.hw.model Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Inventory	Hardware serial number	MIB: FASTPATH-SWITCHING-MIB Serial number of the switch	SNMP	system.hw.serialnumber Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1d`
Memory	Available memory	MIB: FASTPATH-SWITCHING-MIB The total memory freed for utilization.	SNMP	vm.memory.available[agentSwitchCpuProcessMemFree.0]
Memory	Total memory	MIB: FASTPATH-SWITCHING-MIB The total Memory allocated for the tasks	SNMP	vm.memory.total[agentSwitchCpuProcessMemAvailable.0]
Memory	Memory utilization	Memory utilization in %	CALCULATED	vm.memory.util[memoryUsedPercentage.0] Expression: `(last("vm.memory.total[agentSwitchCpuProcessMemAvailable.0]")-last("vm.memory.available[agentSwitchCpuProcessMemFree.0]"))/last("vm.memory.total[agentSwitchCpuProcessMemAvailable.0]")*100`
Power_supply	#{#SNMPVALUE}: Power supply status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The status of power supply	SNMP	sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The temperature value reported by sensor	SNMP	sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}]
Temperature	#{#SNMPVALUE}: Temperature status	MIB: FASTPATH-BOXSERVICES-PRIVATE-MIB The state of temperature sensor	SNMP	sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
High CPU utilization (over {$CPU.UTIL.CRIT}% for 5m)	CPU utilization is too high. The system might be slow to respond.	`{TEMPLATE_NAME:system.cpu.util[agentSwitchCpuProcessTotalUtilization.0].min(5m)}>{$CPU.UTIL.CRIT}`	WARNING
#{#SNMPVALUE}: Fan is in critical state	Please check the fan unit	`{TEMPLATE_NAME:sensor.fan.status[boxServicesFanItemState.{#SNMPINDEX}].count(#1,{$FAN_CRIT_STATUS:"failed"},eq)}=1`	AVERAGE
Operating system description has changed	Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.	`{TEMPLATE_NAME:system.sw.os[agentInventoryOperatingSystem.0].diff()}=1 and {TEMPLATE_NAME:system.sw.os[agentInventoryOperatingSystem.0].strlen()}>0`	INFO	Manual close: YES
Device has been replaced (new serial number received)	Device serial number has changed. Ack to close	`{TEMPLATE_NAME:system.hw.serialnumber.diff()}=1 and {TEMPLATE_NAME:system.hw.serialnumber.strlen()}>0`	INFO	Manual close: YES
High memory utilization (>{$MEMORY.UTIL.MAX}% for 5m)	The system is running out of free memory.	`{TEMPLATE_NAME:vm.memory.util[memoryUsedPercentage.0].min(5m)}>{$MEMORY.UTIL.MAX}`	AVERAGE
#{#SNMPVALUE}: Power supply is in critical state	Please check the power supply unit for errors	`{TEMPLATE_NAME:sensor.psu.status[boxServicesPowSupplyItemState.{#SNMPINDEX}].count(#1,{$PSU_CRIT_STATUS:"failed"},eq)}=1`	AVERAGE
#{#SNMPVALUE}: Temperature is above warning threshold: >{$TEMP_WARN:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].avg(5m)}>{$TEMP_WARN:""} or {TEMPLATE_NAME:sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}].last()}={$TEMP_WARN_STATUS}` Recovery expression: `{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].max(5m)}<{$TEMP_WARN:""}-3`	WARNING	Depends on: - #{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}
#{#SNMPVALUE}: Temperature is above critical threshold: >{$TEMP_CRIT:""}	This trigger uses temperature sensor values as well as temperature sensor status if available	`{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].avg(5m)}>{$TEMP_CRIT:""} or {TEMPLATE_NAME:sensor.temp.status[boxServicesTempSensorState.{#SNMPINDEX}].last()}={$TEMP_CRIT_STATUS}` Recovery expression: `{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].max(5m)}<{$TEMP_CRIT:""}-3`	HIGH
#{#SNMPVALUE}: Temperature is too low: <{$TEMP_CRIT_LOW:""}	-	`{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].avg(5m)}<{$TEMP_CRIT_LOW:""}` Recovery expression: `{TEMPLATE_NAME:sensor.temp.value[boxServicesTempSensorTemperature.{#SNMPINDEX}].min(5m)}>{$TEMP_CRIT_LOW:""}+3`	AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

Link	Source	Compatibility
Netgear_WG103 Template for Netgear WG103 access point.Works with Zabbix 2.4.7 and a Netgear WG103 FW 2.2.5.Contains :Basic information such as : FWversion, S/N, APname, MACLAN, MACWLANInterfaces traffic (LAN and WLAN)Wifi profiles namesCurrent users number connected to the AP template_netgear_wg103	GitHub Community Templates	5.0+
Netgear GS110TP Template for Netgear GS110TP using SNMP.Probably needs to be improved (no triggers).Community used is "public" template_netgear_gs110tp	GitHub Community Templates	5.0+
Template SNMP ReadyNas template_zabbix_2.2_readynas_snmp	GitHub Community Templates	5.0+
SNMP ReadyNAS Tega Template is based on MIB http://www.downloads.netgear.com/files/ReadyNAS/READYNAS-MIB.txt.LLD of disks.It monitors:Disks temperature in Celsius. There is a triggerDisks state. There is triggerVolume state. There is triggerVolume size, free space. There is triggerAnd other.For tuning of a template macros ... template_snmp_readynas_tega	GitHub Community Templates	5.0+
Template SNMP ReadyNas template_snmp_readynas	GitHub Community Templates	5.0+
Template SNMP ReadyNAS template_readynas_monitor_via_snmp	GitHub Community Templates	5.0+
SNMP ReadyNas 3200 template_readynas_3200_snmp	GitHub Community Templates	5.0+

See all Zabbix community templates

Zabbix + Netgear

Netgear

Available solutions

Netgear Fastpath SNMP

Overview

Setup

Zabbix configuration

Macros used

Template links

Discovery rules

Items collected

Triggers

Feedback

Netgear Fastpath SNMP

Overview

Setup

Zabbix configuration

Macros used

Template links

Discovery rules

Items collected

Triggers

Feedback

Netgear Fastpath SNMP

Overview

Setup

Zabbix configuration

Macros used

Template links

Discovery rules

Items collected

Triggers

Feedback

Template Net Netgear Fastpath SNMP

Overview

Setup

Zabbix configuration

Macros used

Template links

Discovery rules

Items collected

Triggers

Feedback

Articles and documentation

Закажите собственную интеграцию

Предложите свою интеграцию