Qlogic

QLogic Corporation was an American manufacturer of networking server and storage networking connectivity and application acceleration products, based in Aliso Viejo, California through 2016.

Available solutions




This template is for Zabbix version: 6.2
Also available for: 6.0 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/intel_qlogic_infiniband_snmp?at=release/6.2

Intel_Qlogic Infiniband SNMP

Overview

For Zabbix version: 6.2 and higher

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name Description Default
{$FAN_CRIT_STATUS}

-

3
{$ICMP_LOSS_WARN}

-

20
{$ICMP_RESPONSE_TIME_WARN}

-

0.15
{$IF.ERRORS.WARN}

-

2
{$IF.UTIL.MAX}

-

90
{$IFCONTROL}

-

1
{$NET.IF.IFADMINSTATUS.MATCHES}

Ignore notPresent(6)

^.*
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}

Ignore down(2) administrative status

^2$
{$NET.IF.IFALIAS.MATCHES}

-

.*
{$NET.IF.IFALIAS.NOT_MATCHES}

-

CHANGE_IF_NEEDED
{$NET.IF.IFDESCR.MATCHES}

-

.*
{$NET.IF.IFDESCR.NOT_MATCHES}

-

CHANGE_IF_NEEDED
{$NET.IF.IFNAME.MATCHES}

-

^.*$
{$NET.IF.IFNAME.NOT_MATCHES}

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

(^Software Loopback Interface|^NULL[0-9.]*$|^[Ll]o[0-9.]*$|^[Ss]ystem$|^Nu[0-9.]*$|^veth[0-9a-z]+$|docker[0-9]+|br-[a-z0-9]{12})
{$NET.IF.IFOPERSTATUS.MATCHES}

-

^.*$
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}

Ignore notPresent(6)

^6$
{$NET.IF.IFTYPE.MATCHES}

-

.*
{$NET.IF.IFTYPE.NOT_MATCHES}

-

CHANGE_IF_NEEDED
{$PSU_CRIT_STATUS}

-

3
{$PSU_WARN_STATUS}

-

4
{$SNMP.TIMEOUT}

-

5m
{$TEMP_CRIT_LOW}

-

5
{$TEMP_CRIT_STATUS}

-

3
{$TEMP_CRIT}

-

60
{$TEMP_WARN_STATUS}

-

2
{$TEMP_WARN}

-

50

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
FAN Discovery

icsChassisFanDescription of icsChassisFanTable

SNMP fan.discovery
Network interfaces discovery

Discovering interfaces from IF-MIB.

SNMP net.if.discovery

Filter:

AND

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- {#IFALIAS} MATCHES_REGEX {$NET.IF.IFALIAS.MATCHES}

- {#IFALIAS} NOT_MATCHES_REGEX {$NET.IF.IFALIAS.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

PSU Discovery

A textual description of the power supply, that can be assigned by the administrator.

SNMP psu.discovery
Temperature Discovery

Discovering sensor's table with temperature filter

SNMP temp.discovery

Filter:

AND

- {#SENSOR_TYPE} MATCHES_REGEX 2

Unit Discovery

-

SNMP unit.discovery

Filter:

AND_OR

- {#ENT_CLASS} MATCHES_REGEX 2

Items collected

Group Name Description Type Key and additional info
Fans {#SNMPVALUE}: Fan status

MIB: ICS-CHASSIS-MIB

The operational status of the fan unit.

SNMP sensor.fan.status[icsChassisFanOperStatus.{#SNMPINDEX}]
General SNMP traps (fallback)

The item is used to collect all SNMP traps unmatched by other snmptrap items

SNMP_TRAP snmptrap.fallback
General System location

MIB: SNMPv2-MIB

The physical location of this node (e.g., telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p> |SNMP |system.location[sysLocation.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:12h`

General System contact details

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

SNMP system.contact[sysContact.0]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

General System object ID

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its Fred Router'.</p> |SNMP |system.objectid[sysObjectID.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:12h`

General System name

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

SNMP system.name

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

General System description

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

SNMP system.descr[sysDescr.0]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

Inventory Hardware model name

MIB: ICS-CHASSIS-MIB

SNMP system.hw.model

Preprocessing:

- REGEX: (.+) - Firmware \1

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Inventory Firmware version

MIB: ICS-CHASSIS-MIB

SNMP system.hw.firmware

Preprocessing:

- REGEX: Firmware Version: ([0-9.]+), \1

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Inventory {#ENT_NAME}: Hardware serial number

MIB: ICS-CHASSIS-MIB

The serial number of the FRU. If not available, this value is a zero-length string.

SNMP system.hw.serialnumber[icsChassisSystemUnitFruSerialNumber.{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Network interfaces Interface {#IFNAME}({#IFALIAS}): Operational status

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

SNMP net.if.status[ifOperStatus.{#SNMPINDEX}]
Network interfaces Interface {#IFNAME}({#IFALIAS}): Bits received

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.in[ifHCInOctets.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

Network interfaces Interface {#IFNAME}({#IFALIAS}): Bits sent

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.out[ifHCOutOctets.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

Network interfaces Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.in.errors[ifInErrors.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.out.errors[ifOutErrors.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.out.discards[ifOutDiscards.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.in.discards[ifInDiscards.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Interface type

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

SNMP net.if.type[ifType.{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Network interfaces Interface {#IFNAME}({#IFALIAS}): Speed

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range ofn-500,000' ton+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p> |SNMP |net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER:1000000</p><p>- DISCARD_UNCHANGED_HEARTBEAT:1h`

Power supply {#SNMPVALUE}: Power supply status

MIB: ICS-CHASSIS-MIB

Actual status of the power supply:

(1) unknown: status not known.

(2) disabled: power supply is disabled.

(3) failed - power supply is unable to supply power due to failure.

(4) warning - power supply is supplying power, but an output or sensor is bad or warning.

(5) standby - power supply believed usable,but not supplying power.

(6) engaged - power supply is supplying power.

(7) redundant - power supply is supplying power, but not needed.

(8) notPresent - power supply is supplying power is not present.

SNMP sensor.psu.status[icsChassisPowerSupplyEntry.{#SNMPINDEX}]
Status Uptime

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

SNMP system.uptime[sysUpTime.0]

Preprocessing:

- MULTIPLIER: 0.01

Status SNMP agent availability

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

INTERNAL zabbix[host,snmp,available]
Status ICMP ping

-

SIMPLE icmpping
Status ICMP loss

-

SIMPLE icmppingloss
Status ICMP response time

-

SIMPLE icmppingsec
Temperature {#SENSOR_INFO}: Temperature

MIB: ICS-CHASSIS-MIB

The current value read from the sensor.

SNMP sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}]
Temperature {#SENSOR_INFO}: Temperature status

MIB: ICS-CHASSIS-MIB

The operational status of the sensor.

SNMP sensor.temp.status[icsChassisSensorSlotOperStatus.{#SNMPINDEX}]

Triggers

Name Description Expression Severity Dependencies and additional info
{#SNMPVALUE}: Fan is in critical state

Please check the fan unit

count(/Intel_Qlogic Infiniband SNMP/sensor.fan.status[icsChassisFanOperStatus.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS}")=1 AVERAGE
System name has changed

System name has changed. Ack to close.

last(/Intel_Qlogic Infiniband SNMP/system.name,#1)<>last(/Intel_Qlogic Infiniband SNMP/system.name,#2) and length(last(/Intel_Qlogic Infiniband SNMP/system.name))>0 INFO

Manual close: YES

Firmware has changed

Firmware version has changed. Ack to close

last(/Intel_Qlogic Infiniband SNMP/system.hw.firmware,#1)<>last(/Intel_Qlogic Infiniband SNMP/system.hw.firmware,#2) and length(last(/Intel_Qlogic Infiniband SNMP/system.hw.firmware))>0 INFO

Manual close: YES

{#ENT_NAME}: Device has been replaced

Device serial number has changed. Ack to close

last(/Intel_Qlogic Infiniband SNMP/system.hw.serialnumber[icsChassisSystemUnitFruSerialNumber.{#SNMPINDEX}],#1)<>last(/Intel_Qlogic Infiniband SNMP/system.hw.serialnumber[icsChassisSystemUnitFruSerialNumber.{#SNMPINDEX}],#2) and length(last(/Intel_Qlogic Infiniband SNMP/system.hw.serialnumber[icsChassisSystemUnitFruSerialNumber.{#SNMPINDEX}]))>0 INFO

Manual close: YES

Interface {#IFNAME}({#IFALIAS}): Link down

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

{$IFCONTROL:"{#IFNAME}"}=1 and last(/Intel_Qlogic Infiniband SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Intel_Qlogic Infiniband SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Intel_Qlogic Infiniband SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))

Recovery expression:

last(/Intel_Qlogic Infiniband SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0
AVERAGE

Manual close: YES

Interface {#IFNAME}({#IFALIAS}): High bandwidth usage

The network interface utilization is close to its estimated maximum bandwidth.

(avg(/Intel_Qlogic Infiniband SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Intel_Qlogic Infiniband SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0

Recovery expression:

avg(/Intel_Qlogic Infiniband SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/Intel_Qlogic Infiniband SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])
WARNING

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Interface {#IFNAME}({#IFALIAS}): High error rate

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

min(/Intel_Qlogic Infiniband SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Intel_Qlogic Infiniband SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}

Recovery expression:

max(/Intel_Qlogic Infiniband SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/Intel_Qlogic Infiniband SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8
WARNING

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

change(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Intel_Qlogic Infiniband SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Intel_Qlogic Infiniband SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Intel_Qlogic Infiniband SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Intel_Qlogic Infiniband SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Intel_Qlogic Infiniband SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Intel_Qlogic Infiniband SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Intel_Qlogic Infiniband SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)

Recovery expression:

(change(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Intel_Qlogic Infiniband SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Intel_Qlogic Infiniband SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)
INFO

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

{#SNMPVALUE}: Power supply is in critical state

Please check the power supply unit for errors

count(/Intel_Qlogic Infiniband SNMP/sensor.psu.status[icsChassisPowerSupplyEntry.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1 AVERAGE
{#SNMPVALUE}: Power supply is in warning state

Please check the power supply unit for errors

count(/Intel_Qlogic Infiniband SNMP/sensor.psu.status[icsChassisPowerSupplyEntry.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS}")=1 WARNING

Depends on:

- {#SNMPVALUE}: Power supply is in critical state

has been restarted

Uptime is less than 10 minutes.

last(/Intel_Qlogic Infiniband SNMP/system.uptime[sysUpTime.0])<10m WARNING

Manual close: YES

Depends on:

- No SNMP data collection

No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

max(/Intel_Qlogic Infiniband SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 WARNING

Depends on:

- Unavailable by ICMP ping

Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

max(/Intel_Qlogic Infiniband SNMP/icmpping,#3)=0 HIGH
High ICMP ping loss

-

min(/Intel_Qlogic Infiniband SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Intel_Qlogic Infiniband SNMP/icmppingloss,5m)<100 WARNING

Depends on:

- Unavailable by ICMP ping

High ICMP ping response time

-

avg(/Intel_Qlogic Infiniband SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} WARNING

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

{#SENSOR_INFO}: Temperature is above warning threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

avg(/Intel_Qlogic Infiniband SNMP/sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SENSOR_INFO}"} or last(/Intel_Qlogic Infiniband SNMP/sensor.temp.status[icsChassisSensorSlotOperStatus.{#SNMPINDEX}])={$TEMP_WARN_STATUS}

Recovery expression:

max(/Intel_Qlogic Infiniband SNMP/sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SENSOR_INFO}"}-3
WARNING

Depends on:

- {#SENSOR_INFO}: Temperature is above critical threshold

{#SENSOR_INFO}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

avg(/Intel_Qlogic Infiniband SNMP/sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SENSOR_INFO}"} or last(/Intel_Qlogic Infiniband SNMP/sensor.temp.status[icsChassisSensorSlotOperStatus.{#SNMPINDEX}])={$TEMP_CRIT_STATUS}

Recovery expression:

max(/Intel_Qlogic Infiniband SNMP/sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SENSOR_INFO}"}-3
HIGH
{#SENSOR_INFO}: Temperature is too low

-

avg(/Intel_Qlogic Infiniband SNMP/sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SENSOR_INFO}"}

Recovery expression:

min(/Intel_Qlogic Infiniband SNMP/sensor.temp.value[icsChassisSensorSlotValue.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SENSOR_INFO}"}+3
AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

Articles and documentation

+ Propose new article

Não encontrou a integração que vocá precisa?