Zabbix + Cisco

Template Cisco ASR 9k Health-CPU-Memory-Power Supply-Temperature ( RSP e LC )-FAN ( FAN and FANTray )-Power ConsumptionBy: Flavio Gomes Figueira Camacho JuniorRequire:Firmware / Software.IOS XR 5.3.1.IOS XR 5.3.4ValueMap.CISCO-ENTITY-FRU-CONTROL-MIB::PowerOperType.CISCO-ENTITY-FRU-CONTROL-MIB::CefcFanTrayStatusEntry.CISCO-ENTITY-SENSOR-MIB::SensorStatus.ENTITY-SENSORS-MIB::EntitySensorStatusBase:CISCO-MEMORY-POOL-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-MEMORY-POOL-MIB.phpCISCO-PROCESS-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-PROCESS-MIB.phpENTITY-MIBhttp://www.circitor.fr/Mibs/Html/E/ENTITY-MIB.phpCISCO-ENTITY-FRU-CONTROL-MIB.mibhttps://circitor.fr/Mibs/Html/C/CISCO-ENTITY-FRU-CONTROL-MIB.phpCISCO-ENTITY-SENSOR-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-ENTITY-SENSOR-MIB.phpExternal Scripts and Value Mapping on my Github:https://github.com/flaviojunior1995/Zabbix-Templates

A Nexus 3xxx template to get SNMP system informations.This template will find interface, CPU, Fan, create graphs, check ip/tcp/udp/icmp information, create some triggers etc...All items, triggers and discovery rules have brief descriptions.If SNMP is not your friend, you can check this web page (https://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1) to help you.

PoE, port usage, uptime

Template Cisco BGP Sessions-AdminStatus-Established Time-OperationStatus-AS Name-Maximum Prefix-Accepted Prefix-BGP last ErrorBy: Flavio Gomes Figueira Camacho JuniorRequire:ValueMaps.BGP4-MIB::bgpPeerAdminStatus.BGP4-MIB::bgpPeerStateExternalScript.as.name.oid_to_ipv6Base:CISCO-BGP4-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-BGP4-MIB.php#cbgpPeer2RemoteAsExternal Scripts and Value Mapping on my Github:https://github.com/flaviojunior1995/Zabbix-Templates

-- *****************************************************************-- ASYNCOS-MAIL-MIB-- Copyright (c) 2005-2011 by Cisco Systems, Inc.-- All rights reserved.-- Cisco IronPort Email and Web Security Customer Service-- *****************************************************************Adicione as MIBs no servidor de monitoramento antes de executar o template nos applianceshttps://www.cisco.com/web/ironport/tools/email/ASYNCOS-MAIL-MIB.txthttps://www.cisco.com/web/ironport/tools/email/IRONPORT-SMI.txt

command IPSLA on router:ip sla 1111udp-jitter 1.1.1.1 49333 source-ip 2.2.2.2 codec g729atag Regionip sla schedule 1111 life forever start-time nowtemplate will get all information like "sh ip sla statistics", don´t forget use tag.

CUCM Feature Service Status request from AXLЗапрос информации о статусе сервисов CUCM через AXL.Необходим Application User с правами на чтение AXL APIApplication user name: {$ZABBIX_APIUSER_UC}Applicatuin user passwd: {$ZABBIX_APIUSER_UC}

Запрос кол-ва лицензий для Cisco UCM 11.5 через HTTP Agent.На CUCM необходим application user с правами на чтение AXL.В шаблоне использованы макросы:логин для Application user: {$ZABBIX_APIUSER_UC}пароль для Application user: {$ZABBIX_APIPASS_UC}

CUCM replication status request from AXLНеобходим Application User с правами на чтение AXL APIApplication user name: {$ZABBIX_APIUSER_UC}Applicatuin user passwd: {$ZABBIX_APIUSER_UC}

Information from PerfMon API for MGCP E1 ports.needs application user with permission access to PerfMonmacro for username: {$ZABBIX_APIUSER_UC}macro for password: {$ZABBIX_APIPASS_UC}

Template allows to monitor your CISCO ESA ( IRONPORT ). number of active recipients, number of completed recipietns per minute, number of injected (recieved by esa) messages per minute, number of connections and so on. For now there is no triggers.Installation:import the template,create read_only_operator user in your ESA,create and fill in value macros in zabbix ESA host: {$IRP_LOGIN} for login and {$IRP_PASS} for password (both created on step 2)link imported template to ESA hostDefault update interval is 5 min. you can chage it in "Get_Ironport_xml_status" item.Tempalate contains 28 items. "HTTP agent" item (Get_Ironport_xml_status) reads xml status page from ESA (https://{HOST.IP}/xml/status) and 27 dependet items, using preproceccing and XML Path to get items from XML:5xx_hard_bounced_recipsactive_recipscompleted_recipscompleted_recips_last_1_minconn_inconn_outdeleted_recipsdelivered_recipsdelivered_recips_last_1_mindns_hard_bounced_recipsdropped_msgsexpired_hard_bounced_recipsfilter_hard_bounced_recipsgen_bounce_recipsglobal_unsub_hitshard_bounced_recipshard_bounced_recips_last_1_mininj_msgsinj_msgs_last_1_mininj_recipsinj_recips_last_1_minkbytes_in_policy_virus_outbreak_quarantinemsgs_in_policy_virus_outbreak_quarantineother_hard_bounced_recipsrejected_recipssoft_bounced_evtssoft_bounced_evts_last_1_min

Based on the standalone Cisco UCS hw monitoring template.Contains:MB operation staterack serial numberDiscoveries:ArraysCPUsDisksFansMemoryPSURaid batterysRaid controllers

Template for Cisco Small Business Switch SG350XG-2F10Device DetailsTraffic on Ports (IN/OUT)Errors on Ports (IN/OUT)Status on PortsAdmin-Status on PortsStatus OOBPing LatencyTrigger Status Port with dependency to Admin-Status of PortTrigger Errors on PortsTrigger OOB Port9 Example-Graphs

Simple template for: Cisco SG220-26Port Status, Port Traffic In, Port Traffic Out, and System Uptime.Hardware webpage:goo.gl/7zdRSN

This template discovers LACP interfaces and create items, triggers and graphs for monitoring their status

Template for monitoring IPMI sensors for Cisco UCS servers hardwaretested on C220M3please disable absend HDD and unsupported items after some time.sensors and triggers:cpu temperatureDDR modules statusHDD statusLED fan statusoveral leds statusPower modules statusother temperature sensorsstorage status

I was looking for a template that gave me as much information as possible on a Cisco device, working on Zabbix 4.0.x + and quick implementation of multiple Zabbix servers. Template is based on the stock Cisco SNMPv2 template but with some additional contentDevice Model NameFAN DiscoveryPower SupplyTemperatureCPU DiscoverySerial Numbers DiscoveryMemory DiscoveryNetwork interfaces DiscoveryBased on your device it will create around:150-250 items100-150 triggers20-50 graphsTested and worked in my case on:Cisco 800Cisco 878 k9Cisco 881Cisco 803As it is based on the default Cisco SNMPv2 template it will work on every generic Cisco Router/Switch.

This template gets informations from optical sensors in Cisco switches/routes. It will get optical transmit and receive power from each optical interface connected in.It uses mibs CISCO-ENTITY-SENSOR-MIB and CISCO-ENVMON-MIB.Do not forget to add this lines to snmp.conf!mibs +CISCO-ENTITY-SENSOR-MIBmibs +CISCO-ENVMON-MIBAfter discovery, template finds all connected GBICs and get informations about thresholds and signal levels.There are triggers included which will be PROBLEM if signal level is out of range or if signal level changes in time.Just apply template to your box and set macro {$SNMP_COMMUNITY} to fit your needs.

Features:LLD for fansLLD for disk drivesLLD for logical disksLLD for PSUTested on:Cisco UCS C220 M3Cisco UCS C220 M4

Monitoring Cisco UCS Server for snmp v2 Working with B and C Blade servertested on Cisco chassis 5018 and B200M4 .it give you this info :Servers Hardware component info.Temperature monitoring .FAN monitoring .PSU monitoring .Memory monitoring .CPU monitoring .Networkyou only need to add {$SNMP_COMMUNITY} in macros

This template is a smattering of a few templates combined with some custom discovery rules.It has been tested to work with a bunch of Cisco switches and routers. It uses the standard SNMP root for all discovery (using OID´s), so it works with most switch/router devices. If you have any issues with it let me know. I exported this from a live system, so the read the dependencies below.What it does:BGP DiscoveryAdmin StatusPeer StateCPU DiscoveryUsage on coreInterface DiscoveryTraffic in/outErrors in/outDrops in/outMemory Pool DiscoveryMem free in poolOSPF DiscoveryNeighbor StateTemperature Discoverytemperature of monitorThe template creates quite a few graph prototypes and adds them to a screen as well.Dependencies:The template had value maps, interface filters and groups associated with it when I cloned it, but I removed them so there shouldn´t be any issues with it. If you find an issue importing let me know. I was successful importing default template to a new system.Other Instructions:Be sure to set the $SNMP_COMMUNITY and $CRD_SNMPV2_R values. They should both be your SNMP community string.

Cisco SNMP v3 Discovery for Interface MonitoringTemplate use this macros:{$SNMP_SECNAME} security name ( snmpv3 Username ){$SNMP_AUTH} authentication password.{$SNMP_PRIV} private password.iinclude this data :Admin status of interfaceOperational status of interfaceDescription of interfaceincomming trafficOutgoing traffic

Grettings people, here is an XML template developed by me, to monitoring the all 24 Interfaces, 5 fan cooler, latency, temperature and more from the Cisco SGE2000P switch.The only thing to consider here is, you will need to change the SNMP community set in here, because i made it for the company that i´m working right nowc yaa

Hi,Here is a result of my work on Cisco SG300 witch Zabbix 4.0.based on SNMP and LLD,it´s working with vary numbers of interfaces,interface is discovered only if it´s operational up (less unnecessary data),it also monitors CPU usage, status of temperature and fan´s (if any),tested witch SG300 and SG200 switches,in case of SG200 you may consider updating firmware of your switch as older versions doesn´t support SNMPHave fun

CPU loading, Port status, Incoming speed,Outcoming speed,Uptime, Graphs for port utilization

Template for all Cisco devices which support the CISCO-MEMORY-POOL-MIB and CISCO-PROCESS-MIB.Discovery all CPUs and memory pools with dynamic trigger thresholds (macro context) and flapping prevention (use of .max()/.min() functions).You need to create a user macro on the template or global level with name {$CRD_SNMPV2_R} = "yourSNMPv2ReadCommunity".

Zabbix SNMP template for discovering and monitoring cisco IPsec tunnelsgithubhowto:Import template to zabbixPut MIB files to the folder /usr/share/snmp/mibs/Add host (cisco router) to zabbix (snmp)Add template to the hostRequired MIB files:CISCO-IPSEC-FLOW-MONITOR-MIB.mySNMPv2-SMI.mySNMPv2-CONF.mySNMPv2-TC.myCISCO-MEDIA-GATEWAY-MIB.myCISCO-SMI.my

README: https://github.com/hacktivism-github/zbx-templates-repository/blob/master/zbx-cisco/ASR9k/optical-monitoring/README.md

Version 1.1Template is tested against Zabbix version 4.4.6 and ASA version 9.14(1).Failover role can be primary or secondary, it based in your ASA configuration.Failover status can be Active unit or Standby unit. This indicates which of your Firewall is active right now.Template also populates inventory fields automaticly.This is snmpv2 template, but v3 is coming soon.Version 1.1.3SNMPv3 support added, new macros:{$SECURITY_NAME} = Username{$AUTH_PASSPHRASE} = Authentication password{$PRIV_PASSPHRASE} = Encryption passwordUse authentication algorithm SHA and encryption algorithm AES (128).Added OID: ASA System name (ciscoASAsysName)OLD VERSIONS, USE GITHUB https://github.com/hrleinonen/zabbixMore information (soon) https://www.hacknetwork.org/?page_id=304

Template Cisco 7600 Health-CPU-Memory-PowerSupply-PowerConsumption-Temperature-FAN-CEFBy: Flavio Gomes Figueira Camacho JuniorRequire:Firmware / Software.IOS rp-ADVENTERPRISEK9-M 15.2(4)S4ValueMaps.CISCO-ENVMON-MIB::CiscoEnvMonState.ENTITY-SENSORS-MIB::EntitySensorStatus.CISCO-CEF-TC-MIB::CefFailureReasonBase:CISCO-ENVMON-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-ENVMON-MIB.phpCISCO-MEMORY-POOL-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-MEMORY-POOL-MIB.phpCISCO-PROCESS-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-PROCESS-MIB.phpENTITY-MIB.mibhttp://www.circitor.fr/Mibs/Html/E/ENTITY-MIB.phpCISCO-ENTITY-SENSOR-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-ENTITY-SENSOR-MIB.phpCISCO-ENTITY-FRU-CONTROL-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-ENTITY-FRU-CONTROL-MIB.phpCISCO-CEF-MIB.mibhttp://www.circitor.fr/Mibs/Html/C/CISCO-CEF-MIB.phpExternal Scripts and Value Mapping on my Github:https://github.com/flaviojunior1995/Zabbix-Templates

Amperage sensorsFan Tray sensorsTemperature SensorsModule sensorsLoad sensorsBGP Peers (inherited from Template Cisco General)CPUFANFlash DevicesMemory PoolOSPF Interfaces (inherited from Template Cisco General)OSPF Neighbours (inherited from Template Cisco General)Power Supplies

BGP Peers (SNMP traps)CPUFANFlash devicesMemory poolOSPF Interfaces (inherited from Template Cisco General)OSPF Neighbours (inherited from Template Cisco General)Power SuppliesTemperatureVoltage

Template de Monitoramento de Access Point Cisco Small BusinessModel: WAP4410N-E, Firmware: Versão 2.0.7.8Monitoramento: Disponibilidade; Uptime; Nome; Modelo; Localização; CPU; SSID,s; Trafego Wifi; Mac adress.

Abstract: Cisco CISCO-CLASS-BASED-QOS-MIB is one of the most complex and not clear Cisco SNMP MIBs. This python script as final output produces in JSON format correlation between Intrface Name, Interface QoS ID, Class-name, QOS Config Index ID, parent object. Output is takeen by Zabbix Template (discovery rule) as input to produce final counters as \"items\". Physical, sub-interface, tunnel interfaces are supported.

Discovery for Device Model Name, Fan, Power Supply, Temperature

A bot that provides an interface between the Cisco Spark messaging platform and the Zabbix monitoring system.

Zabbix template for monitoring Cisco 3750 in StackWise

Abstract (Overview): Discover the relevant counters (SNMP oids suffixes) via external check (classmap.php) Add the pairs QoS Interface / classname counters as items.

Script to pull a list of current faults from a UCS Manager (UCSM) or standalone Cisco Integrated Management Controller (IMC), optionally filtered by severity. There are instructions below on how to integrate this with the Zabbix monitoring platform, and you can also just run it from the command line.

Template created with LLD which can find all interfaces with description and aliases

Template for an Cisco ASA 5520 with some scripting.