The critical value of the PSU sensor for trigger expression.

The warning value of the PSU sensor for trigger expression.

The critical value of the FAN sensor for trigger expression.

The warning value of the FAN sensor for trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The cache battery normal state for trigger expression.

The cache battery critical state for trigger expression.

The array controller critical state for trigger expression.

The array controller warning state for trigger expression.

The array controller normal state for trigger expression.

The disk fail state for trigger expression.

The disk critical state for trigger expression.

The disk critical state for trigger expression.

The vdisk normal state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Filter out loopbacks, sup-fc0, nulls, docker veth links and docker0 bridge by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore notPresent(6) by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore down(2) administrative status by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

The time interval for SNMP agent availability trigger expression.

MIB: SNMPv2-MIB

The time in seconds since the network management

portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

Preprocessing

• Check for not supported value: any error

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet,

3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed

node, together with information on how to contact this person. If no contact

information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management

subsystem contained in the entity. This value is allocated within the SMI enterprises

subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what

kind of box' is being managed. For example, if vendor 'Flintstones, Inc.' was

assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1

to its 'Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By

convention, this is the node's fully-qualified domain name. If the name is unknown,

the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

Preprocessing

• Discard unchanged with heartbeat: 1h

Uptime is less than 10 minutes.

• Cisco UCS Manager: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Temperature readings of testpoint: {#SENSOR_LOCATION}.Ambient

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:frontTemp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:rearTemp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:ioh1Temp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.Ambient: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.Front: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.Rear: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.IOH: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

MIB: CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB

Cisco UCS processor:EnvStats:temperature managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Discovering interfaces from IF-MIB.

Preprocessing

• JavaScript: The text is too long. Please see the template.

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifInMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifOutMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer. This object is a 64-bit version

of ifInBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent. This object is a 64-bit version

of ifOutBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

A textual string containing information about the

interface. This string should include the name of the

manufacturer, the product name and the version of the

interface hardware/software.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing

• Custom multiplier: 1000000

• Discard unchanged with heartbeat: 1h

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

Recovers when value below {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Cisco UCS Manager: Interface {#IFNAME}({#IFALIAS}): Link down

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Psu:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the power supply unit for errors

Please check the power supply unit for errors

• Cisco UCS Manager: {#PSU_LOCATION}: Power supply is in critical state

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:model managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:serial managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

Please check the device for errors

Please check the device for warnings

• Cisco UCS Manager: {#UNIT_LOCATION}: System status is in critical state

Device serial number has changed. Acknowledge to close the problem manually.

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Fan:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the fan unit

• Cisco UCS Manager: {#FAN_LOCATION}: Fan is in critical state

Please check the fan unit

Scanning table of physical drive entries CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalDiskTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:diskState managed object property.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:model managed object property.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:serial managed object property. Actually returns part number code.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:deviceType managed object property. Actually returns 'HDD' or 'SSD'.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:size managed object property. In MB.

Preprocessing

• Custom multiplier: 1048576

• Discard unchanged with heartbeat: 1d

Please check physical disk for warnings or errors

Please check physical disk for warnings or errors

• Cisco UCS Manager: {#DISK_LOCATION}: Physical disk failed

Disk serial number has changed. Acknowledge to close the problem manually.

CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalLunTable

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:presence managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:type managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:size managed object property in MB.

Preprocessing

• Custom multiplier: 1048576

• Discard unchanged with heartbeat: 1d

Please check virtual disk for warnings or errors

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:RaidBattery:operability managed object property.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

Please check the device for faults

Please check the device for faults

• Cisco UCS Manager: {#DISKARRAY_LOCATION}: Disk array controller is in critical state

Please check the device for faults

• Cisco UCS Manager: {#DISKARRAY_LOCATION}: Disk array controller is in critical state
• Cisco UCS Manager: {#DISKARRAY_LOCATION}: Disk array controller is in warning state

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the device for faults

Please check the device for faults

• Cisco UCS Manager: {#DISKARRAY_CACHE_LOCATION}: Disk array cache controller battery is in critical state!

The critical value of the PSU sensor for trigger expression.

The warning value of the PSU sensor for trigger expression.

The critical value of the FAN sensor for trigger expression.

The warning value of the FAN sensor for trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The cache battery normal state for trigger expression.

The cache battery critical state for trigger expression.

The array controller critical state for trigger expression.

The array controller warning state for trigger expression.

The array controller normal state for trigger expression.

The disk fail state for trigger expression.

The disk critical state for trigger expression.

The disk critical state for trigger expression.

The vdisk normal state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Filter out loopbacks, sup-fc0, nulls, docker veth links and docker0 bridge by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore notPresent(6) by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore down(2) administrative status by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

The time interval for SNMP agent availability trigger expression.

MIB: SNMPv2-MIB

The time in seconds since the network management

portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

Preprocessing

• Check for not supported value: any error

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet,

3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed

node, together with information on how to contact this person. If no contact

information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management

subsystem contained in the entity. This value is allocated within the SMI enterprises

subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what

kind of box' is being managed. For example, if vendor 'Flintstones, Inc.' was

assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1

to its 'Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By

convention, this is the node's fully-qualified domain name. If the name is unknown,

the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

Uptime is less than 10 minutes.

• Cisco UCS Manager: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Temperature readings of testpoint: {#SENSOR_LOCATION}.Ambient

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:frontTemp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:rearTemp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:ioh1Temp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.Ambient: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.Front: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.Rear: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}.IOH: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

MIB: CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB

Cisco UCS processor:EnvStats:temperature managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

This trigger uses temperature sensor values as well as temperature sensor status if available

• Cisco UCS Manager: {#SENSOR_LOCATION}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Discovering interfaces from IF-MIB.

Preprocessing

• JavaScript: The text is too long. Please see the template.

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifInMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifOutMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer. This object is a 64-bit version

of ifInBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent. This object is a 64-bit version

of ifOutBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

A textual string containing information about the

interface. This string should include the name of the

manufacturer, the product name and the version of the

interface hardware/software.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing

• Custom multiplier: 1000000

• Discard unchanged with heartbeat: 1h

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. { $IFCONTROL:"{#IFNAME}" }=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. The trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

Recovers when value below {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Cisco UCS Manager: Interface {#IFNAME}({#IFALIAS}): Link down

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Psu:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the power supply unit for errors

Please check the power supply unit for errors

• Cisco UCS Manager: {#PSU_LOCATION}: Power supply is in critical state

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:model managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:serial managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

Please check the device for errors

Please check the device for warnings

• Cisco UCS Manager: {#UNIT_LOCATION}: System status is in critical state

Device serial number has changed. Acknowledge to close the problem manually.

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Fan:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the fan unit

• Cisco UCS Manager: {#FAN_LOCATION}: Fan is in critical state

Please check the fan unit

Scanning table of physical drive entries CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalDiskTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:diskState managed object property.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:model managed object property.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:serial managed object property. Actually returns part number code.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:deviceType managed object property. Actually returns 'HDD' or 'SSD'.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:size managed object property. In MB.

Preprocessing

• Custom multiplier: 1048576

• Discard unchanged with heartbeat: 1d

Please check physical disk for warnings or errors

Please check physical disk for warnings or errors

• Cisco UCS Manager: {#DISK_LOCATION}: Physical disk failed

Disk serial number has changed. Acknowledge to close the problem manually.

CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalLunTable

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:presence managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:type managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:size managed object property in MB.

Preprocessing

• Custom multiplier: 1048576

• Discard unchanged with heartbeat: 1d

Please check virtual disk for warnings or errors

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:RaidBattery:operability managed object property.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

Please check the device for faults

Please check the device for faults

• Cisco UCS Manager: {#DISKARRAY_LOCATION}: Disk array controller is in critical state

Please check the device for faults

• Cisco UCS Manager: {#DISKARRAY_LOCATION}: Disk array controller is in critical state
• Cisco UCS Manager: {#DISKARRAY_LOCATION}: Disk array controller is in warning state

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the device for faults

Please check the device for faults

• Cisco UCS Manager: {#DISKARRAY_CACHE_LOCATION}: Disk array cache controller battery is in critical state!

The critical value of the PSU sensor for trigger expression.

The warning value of the PSU sensor for trigger expression.

The critical value of the FAN sensor for trigger expression.

The warning value of the FAN sensor for trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The cache battery normal state for trigger expression.

The cache battery critical state for trigger expression.

The array controller critical state for trigger expression.

The array controller warning state for trigger expression.

The array controller normal state for trigger expression.

The disk fail state for trigger expression.

The disk critical state for trigger expression.

The disk critical state for trigger expression.

The vdisk normal state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Filter out loopbacks, sup-fc0, nulls, docker veth links and docker0 bridge by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore notPresent(6) by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore down(2) administrative status by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

The time interval for SNMP agent availability trigger expression.

MIB: SNMPv2-MIB

The time in seconds since the network management

portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

Preprocessing

• Check for not supported value

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet,

3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed

node, together with information on how to contact this person. If no contact

information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management

subsystem contained in the entity. This value is allocated within the SMI enterprises

subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what

kind of box' is being managed. For example, if vendor 'Flintstones, Inc.' was

assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1

to its 'Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By

convention, this is the node's fully-qualified domain name. If the name is unknown,

the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

Preprocessing

• Discard unchanged with heartbeat: 1h

Uptime is less than 10 minutes.

• Cisco UCS Manager: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Temperature readings of testpoint: {#SENSOR_LOCATION}.Ambient

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:frontTemp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:rearTemp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:ioh1Temp managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_LOCATION}.Ambient: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_LOCATION}.Front: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_LOCATION}.Rear: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_LOCATION}.IOH: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

MIB: CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB

Cisco UCS processor:EnvStats:temperature managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_LOCATION}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Discovering interfaces from IF-MIB.

Preprocessing

• JavaScript: The text is too long. Please see the template.

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifInMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifOutMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer. This object is a 64-bit version

of ifInBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent. This object is a 64-bit version

of ifOutBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

A textual string containing information about the

interface. This string should include the name of the

manufacturer, the product name and the version of the

interface hardware/software.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing

• Custom multiplier: 1000000

• Discard unchanged with heartbeat: 1h

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

Recovers when value below {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Interface {#IFNAME}({#IFALIAS}): Link down

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Psu:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the power supply unit for errors

Please check the power supply unit for errors

• {#PSU_LOCATION}: Power supply is in critical state

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:model managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:serial managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

Please check the device for errors

Please check the device for warnings

• {#UNIT_LOCATION}: System status is in critical state

Device serial number has changed. Acknowledge to close the problem manually.

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Fan:operState managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the fan unit

• {#FAN_LOCATION}: Fan is in critical state

Please check the fan unit

Scanning table of physical drive entries CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalDiskTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:diskState managed object property.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:model managed object property.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:serial managed object property. Actually returns part number code.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:deviceType managed object property. Actually returns 'HDD' or 'SSD'.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:size managed object property. In MB.

Preprocessing

• Custom multiplier: 1048576

• Discard unchanged with heartbeat: 1d

Please check physical disk for warnings or errors

Please check physical disk for warnings or errors

• {#DISK_LOCATION}: Physical disk failed

Disk serial number has changed. Acknowledge to close the problem manually.

CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalLunTable

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:presence managed object property

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:type managed object property

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:size managed object property in MB.

Preprocessing

• Custom multiplier: 1048576

• Discard unchanged with heartbeat: 1d

Please check virtual disk for warnings or errors

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:RaidBattery:operability managed object property.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

Please check the device for faults

Please check the device for faults

• {#DISKARRAY_LOCATION}: Disk array controller is in critical state

Please check the device for faults

• {#DISKARRAY_LOCATION}: Disk array controller is in critical state
• {#DISKARRAY_LOCATION}: Disk array controller is in warning state

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing

• Discard unchanged with heartbeat: 6h

Please check the device for faults

Please check the device for faults

• {#DISKARRAY_CACHE_LOCATION}: Disk array cache controller battery is in critical state!

The cache battery critical state for trigger expression.

The cache battery normal state for trigger expression.

The array controller critical state for trigger expression.

The array controller normal state for trigger expression.

The array controller warning state for trigger expression.

The disk critical state for trigger expression.

The disk critical state for trigger expression.

The disk fail state for trigger expression.

The critical value of the FAN sensor for trigger expression.

The warning value of the FAN sensor for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

The unit health warning state for trigger expression.

-

-

This macro is used in network interface discovery. Can be overridden on the host level. Ignore notPresent(6) by default.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore down(2) administrative status by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Filter out loopbacks, sup-fc0, nulls, docker veth links and docker0 bridge by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level. Ignore notPresent(6) by default.

This macro is used in network interface discovery. Can be overridden on the host level.

This macro is used in network interface discovery. Can be overridden on the host level.

The critical value of the PSU sensor for trigger expression.

The warning value of the PSU sensor for trigger expression.

The time interval for SNMP agent availability trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The vdisk normal state for trigger expression.

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

Scanning table of Array controllers: CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageControllerTable.

-

Discovering interfaces from IF-MIB.

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Filter:

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IFDESCR.NOT_MATCHES}

- {#IFALIAS} MATCHES_REGEX {$NET.IFALIAS.MATCHES}

- {#IFALIAS} NOT_MATCHES_REGEX {$NET.IFALIAS.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IFTYPE.NOT_MATCHES}

Scanning table of physical drive entries CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalDiskTable.

-

-

-

-

CISCO-UNIFIED-COMPUTING-STORAGE-MIB::cucsStorageLocalLunTable

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:RaidBattery:operability managed object property.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Fan:operState managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet,

3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed

node, together with information on how to contact this person. If no contact

information is known, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management

subsystem contained in the entity. This value is allocated within the SMI enterprises

subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what

kind of box' is being managed. For example, if vendor 'Flintstones, Inc.' was

assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1

to its 'Fred Router'.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By

convention, this is the node's fully-qualified domain name. If the name is unknown,

the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:model managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:serial managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifInMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses. This object

is a 64-bit version of ifOutMulticastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer. This object is a 64-bit version

of ifInBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent. This object is a 64-bit version

of ifOutBroadcastPkts.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

A textual string containing information about the

interface. This string should include the name of the

manufacturer, the product name and the version of the

interface hardware/software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing:

- MULTIPLIER: 1000000

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:diskState managed object property.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:model managed object property.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:serial managed object property. Actually returns part number code.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:deviceType managed object property. Actually returns 'HDD' or 'SSD'.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalDisk:size managed object property. In MB.

Preprocessing:

- MULTIPLIER: 1048576

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB

Cisco UCS equipment:Psu:operState managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: SNMPv2-MIB

The time in seconds since the network management

portion of the system was last re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

Preprocessing:

- CHECK_NOT_SUPPORTED

⛔️ON_FAIL: CUSTOM_VALUE -> 0

- MULTIPLIER: 0.01

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnit:operState managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Temperature readings of testpoint: {#SENSOR_LOCATION}.Ambient

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:frontTemp managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:rearTemp managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

Cisco UCS compute:RackUnitMbTempStats:ioh1Temp managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB

Cisco UCS processor:EnvStats:temperature managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:presence managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:type managed object property

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: CISCO-UNIFIED-COMPUTING-STORAGE-MIB

Cisco UCS storage:LocalLun:size managed object property in MB.

Preprocessing:

- MULTIPLIER: 1048576

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Please check the device for faults

Please check the device for faults

Depends on:

- {#DISKARRAY_LOCATION}: Disk array controller is in critical state

Please check the device for faults

Depends on:

- {#DISKARRAY_LOCATION}: Disk array controller is in critical state

- {#DISKARRAY_LOCATION}: Disk array controller is in warning state

Please check the device for faults

Please check the device for faults

Depends on:

- {#DISKARRAY_CACHE_LOCATION}: Disk array cache controller battery is in critical state!

Please check the fan unit

Please check the fan unit

Depends on:

- {#FAN_LOCATION}: Fan is in critical state

System name has changed. Ack to close.

Manual close: YES

Device serial number has changed. Ack to close

Manual close: YES

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

Recovers when value below {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Please check physical disk for warnings or errors

Please check physical disk for warnings or errors

Depends on:

- {#DISK_LOCATION}: Physical disk failed

Disk serial number has changed. Ack to close

Manual close: YES

Please check the power supply unit for errors

Please check the power supply unit for errors

Depends on:

- {#PSU_LOCATION}: Power supply is in critical state

Uptime is less than 10 minutes.

Manual close: YES

Depends on:

- No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Please check the device for errors

Please check the device for warnings

Depends on:

- {#UNIT_LOCATION}: System status is in critical state

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_LOCATION}.Ambient: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_LOCATION}.Front: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_LOCATION}.Rear: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_LOCATION}.IOH: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_LOCATION}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Please check virtual disk for warnings or errors

The critical value of the PSU sensor for trigger expression.

The warning value of the PSU sensor for trigger expression.

The critical value of the FAN sensor for trigger expression.

The warning value of the FAN sensor for trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The cache battery normal state for trigger expression.

The cache battery critical state for trigger expression.

The array controller critical state for trigger expression.

The array controller warning state for trigger expression.

The array controller normal state for trigger expression.

The disk fail state for trigger expression.

The disk critical state for trigger expression.

The disk critical state for trigger expression.

The vdisk normal state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.

The unit health critical state for trigger expression.