Mikrotik

Mikrotik

MikroTik is a Latvian network equipment manufacturer. The company develops and sells wired and wireless network routers, network switches, access points, as well as operating systems and auxiliary software.

Available solutions




This template is for Zabbix version: 7.0
Also available for: 6.4 6.2 6.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/mikrotik/mikrotik_snmp?at=release/7.0

Mikrotik by SNMP

Overview

Known Issues

Description: Doesn't have ifHighSpeed filled. fixed in more recent versions Version: RouterOS 6.28 or lower

Description: Doesn't have any temperature sensors Version: RouterOS 6.38.5 Device: Mikrotik 941-2nD, Mikrotik 951G-2HnD

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

  • Mikrotik RouterOS 7.0

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Name Description Default
{$VFS.FS.PUSED.MAX.CRIT} 90
{$VFS.FS.PUSED.MAX.WARN} 80
{$CPU.UTIL.CRIT} 90
{$TEMP_CRIT} 60
{$TEMP_CRIT_LOW} 5
{$TEMP_WARN} 50
{$TEMP_CRIT:"CPU"} 75
{$TEMP_WARN:"CPU"} 70
{$MEMORY.UTIL.MAX} 90
{$IFNAME.WIFI.MATCHES}

This macro is used in CAPsMAN AP channel discovery. It can be overridden on the host level.

 WIFI
{$IFNAME.LTEMODEM.MATCHES}

This macro is used in LTE modem discovery. It can be overridden on the host.

 ^lte
{$LTEMODEM.RSSI.MIN.WARN}

The LTE modem RSSI minimum value for warning trigger expression.

 -100
{$LTEMODEM.RSRP.MIN.WARN}

The LTE modem RSRP minimum value for warning trigger expression.

 -100
{$LTEMODEM.RSRQ.MIN.WARN}

The LTE modem RSRQ minimum value for warning trigger expression.

 -20
{$LTEMODEM.SINR.MIN.WARN}

The LTE modem SINR minimum value for warning trigger expression.

 0
{$SNMP.TIMEOUT}

Time interval for the SNMP availability trigger.

 5m
{$ICMP_LOSS_WARN}

Warning threshold of ICMP packet loss in %.

 20
{$ICMP_RESPONSE_TIME_WARN}

Warning threshold of the average ICMP response time in seconds.

 0.15
{$IF.ERRORS.WARN}

Warning threshold of error packet rate. Can be used with interface name as context.

 2
{$IF.UTIL.MAX}

Used as a threshold in the interface utilization trigger.

 90
{$IFCONTROL}

Link status trigger will be fired only for interfaces where the context macro equals "1".

 1
{$NET.IF.IFNAME.MATCHES}

Used for network interface discovery. Can be overridden on the host or linked template level.

 ^.*$
{$NET.IF.IFNAME.NOT_MATCHES}

Filters out loopbacks, nulls, docker veth links and docker0 bridge by default.

 Macro too long. Please see the template.
{$NET.IF.IFOPERSTATUS.MATCHES}

Used for network interface discovery. Can be overridden on the host or linked template level.

 ^.*$
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}

Ignore notPresent(6)

 ^6$
{$NET.IF.IFADMINSTATUS.MATCHES}

Used in network interface discovery rule filters.

 ^.*
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}

Ignore down(2) administrative status

 ^2$
{$NET.IF.IFDESCR.MATCHES}

Used in network interface discovery rule filters.

 .*
{$NET.IF.IFDESCR.NOT_MATCHES}

Used in network interface discovery rule filters.

 CHANGE_IF_NEEDED
{$NET.IF.IFALIAS.MATCHES}

Used in network interface discovery rule filters.

 .*
{$NET.IF.IFALIAS.NOT_MATCHES}

Used in network interface discovery rule filters.

 CHANGE_IF_NEEDED
{$NET.IF.IFTYPE.MATCHES}

Used in network interface discovery rule filters.

 .*
{$NET.IF.IFTYPE.NOT_MATCHES}

Used in network interface discovery rule filters.

 CHANGE_IF_NEEDED

Items

Name Description Type Key and additional info
SNMP walk wireless interfaces SNMP agent net.if.wireless.walk
SNMP walk system CPUs

MIB: HOST-RESOURCES-MIB

Discovering system CPUs.

 SNMP agent system.cpu.walk
SNMP walk CPU temperature sensors

MIB: MIKROTIK-MIB

Discovering CPU temperature sensors.

 SNMP agent sensor.cpu.temp.walk
SNMP walk temperature sensors

MIB: MIKROTIK-MIB

Discovering temperature sensors.

 SNMP agent sensor.temp.walk
SNMP walk mounted filesystems

MIB: HOST-RESOURCES-MIB

Discovering mounted filesystems.

 SNMP agent vfs.fs.walk
Used memory

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

 SNMP agent vm.memory.used[hrStorageUsed.Memory]

Preprocessing

  • Custom multiplier: 1024
Total memory

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

 SNMP agent vm.memory.total[hrStorageSize.Memory]

Preprocessing

  • Custom multiplier: 1024
Memory utilization

Memory utilization in %.

 Calculated vm.memory.util[memoryUsedPercentage.Memory]
Operating system

MIB: MIKROTIK-MIB

Software version.

 SNMP agent system.sw.os[mtxrLicVersion.0]

Preprocessing

  • Discard unchanged with heartbeat: 1d
Hardware model name SNMP agent system.hw.model

Preprocessing

  • Discard unchanged with heartbeat: 1d
Hardware serial number

MIB: MIKROTIK-MIB

RouterBOARD serial number.

 SNMP agent system.hw.serialnumber

Preprocessing

  • Discard unchanged with heartbeat: 1d
Firmware version

MIB: MIKROTIK-MIB

Current firmware version.

 SNMP agent system.hw.firmware

Preprocessing

  • Discard unchanged with heartbeat: 1d
Uptime (network)

MIB: SNMPv2-MIB

Time (in hundredths of a second) since the network management portion of the system was last re-initialized.

 SNMP agent system.net.uptime[sysUpTime.0]

Preprocessing

  • Custom multiplier: 0.01
Uptime (hardware)

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

 SNMP agent system.hw.uptime[hrSystemUptime.0]

Preprocessing

  • Check for not supported value: any error

    ⛔️Custom on fail: Set value to: 0

  • Custom multiplier: 0.01
SNMP traps (fallback)

The item is used to collect all SNMP traps unmatched by other snmptrap items

 SNMP trap snmptrap.fallback
System location

MIB: SNMPv2-MIB

Physical location of the node (e.g., equipment room, 3rd floor). If not provided, the value is a zero-length string.

 SNMP agent system.location[sysLocation.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System contact details

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

 SNMP agent system.contact[sysContact.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System object ID

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

 SNMP agent system.objectid[sysObjectID.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
System name

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

 SNMP agent system.name

Preprocessing

  • Discard unchanged with heartbeat: 12h
System description

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

 SNMP agent system.descr[sysDescr.0]

Preprocessing

  • Discard unchanged with heartbeat: 12h
SNMP agent availability

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

 Zabbix internal zabbix[host,snmp,available]
ICMP ping Simple check icmpping
ICMP loss Simple check icmppingloss
ICMP response time Simple check icmppingsec
Mikrotik: SNMP walk network interfaces

Discovering interfaces from IF-MIB.

 SNMP agent net.if.walk

Triggers

Name Description Expression Severity Dependencies and additional info
MikroTik: High memory utilization

The system is running out of free memory.

 min(/Mikrotik by SNMP/vm.memory.util[memoryUsedPercentage.Memory],5m)>{$MEMORY.UTIL.MAX} Average
MikroTik: Operating system description has changed

The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.

 last(/Mikrotik by SNMP/system.sw.os[mtxrLicVersion.0],#1)<>last(/Mikrotik by SNMP/system.sw.os[mtxrLicVersion.0],#2) and length(last(/Mikrotik by SNMP/system.sw.os[mtxrLicVersion.0]))>0 Info Manual close: Yes
Depends on:
  • MikroTik: System name has changed
MikroTik: Device has been replaced

Device serial number has changed. Acknowledge to close the problem manually.

 last(/Mikrotik by SNMP/system.hw.serialnumber,#1)<>last(/Mikrotik by SNMP/system.hw.serialnumber,#2) and length(last(/Mikrotik by SNMP/system.hw.serialnumber))>0 Info Manual close: Yes
MikroTik: Firmware has changed

Firmware version has changed. Acknowledge to close the problem manually.

 last(/Mikrotik by SNMP/system.hw.firmware,#1)<>last(/Mikrotik by SNMP/system.hw.firmware,#2) and length(last(/Mikrotik by SNMP/system.hw.firmware))>0 Info Manual close: Yes
MikroTik: Host has been restarted

Uptime is less than 10 minutes.

 (last(/Mikrotik by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Mikrotik by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Mikrotik by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Mikrotik by SNMP/system.net.uptime[sysUpTime.0])<10m) Warning Manual close: Yes
Depends on:
  • MikroTik: No SNMP data collection
MikroTik: System name has changed

The name of the system has changed. Acknowledge to close the problem manually.

 last(/Mikrotik by SNMP/system.name,#1)<>last(/Mikrotik by SNMP/system.name,#2) and length(last(/Mikrotik by SNMP/system.name))>0 Info Manual close: Yes
MikroTik: No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

 max(/Mikrotik by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 Warning Depends on:
  • MikroTik: Unavailable by ICMP ping
MikroTik: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

 max(/Mikrotik by SNMP/icmpping,#3)=0 High
MikroTik: High ICMP ping loss min(/Mikrotik by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Mikrotik by SNMP/icmppingloss,5m)<100 Warning Depends on:
  • MikroTik: Unavailable by ICMP ping
MikroTik: High ICMP ping response time

Average ICMP response time is too high.

 avg(/Mikrotik by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} Warning Depends on:
  • MikroTik: High ICMP ping loss
  • MikroTik: Unavailable by ICMP ping

LLD rule CPU discovery

Name Description Type Key and additional info
CPU discovery

HOST-RESOURCES-MIB::hrProcessorTable discovery.

 Dependent item hrProcessorLoad.discovery

Preprocessing

  • SNMP walk to JSON

  • Discard unchanged with heartbeat: 1h

Item prototypes for CPU discovery

Name Description Type Key and additional info
#{#SNMPINDEX}: CPU utilization

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that this processor was not idle. Implementations may approximate this one minute smoothing period if necessary.

 Dependent item system.cpu.util[hrProcessorLoad.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.25.3.3.1.2.{#SNMPINDEX}

Trigger prototypes for CPU discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: #{#SNMPINDEX}: High CPU utilization

CPU utilization is too high. The system might be slow to respond.

 min(/Mikrotik by SNMP/system.cpu.util[hrProcessorLoad.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT} Warning

LLD rule Temperature CPU discovery

Name Description Type Key and additional info
Temperature CPU discovery

MIKROTIK-MIB::mtxrHlProcessorTemperature

Since temperature of CPU is not available on all Mikrotik hardware, this is done to avoid unsupported items.

 Dependent item mtxrHlProcessorTemperature.discovery

Preprocessing

  • SNMP walk to JSON

    ⛔️Custom on fail: Discard value

  • Discard unchanged with heartbeat: 1h

Item prototypes for Temperature CPU discovery

Name Description Type Key and additional info
CPU: Temperature

MIB: MIKROTIK-MIB

mtxrHlProcessorTemperature Processor temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

 Dependent item sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.3.11.{#SNMPINDEX}

  • Custom multiplier: 0.1

  • Discard unchanged with heartbeat: 3m

Trigger prototypes for Temperature CPU discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: CPU: Temperature is above warning threshold

This trigger uses temperature sensor values as well as temperature sensor status if available.

 avg(/Mikrotik by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"CPU"} Warning Depends on:
  • MikroTik: CPU: Temperature is above critical threshold
MikroTik: CPU: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available.

 avg(/Mikrotik by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"CPU"} High
MikroTik: CPU: Temperature is too low avg(/Mikrotik by SNMP/sensor.temp.value[mtxrHlProcessorTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"CPU"} Average

LLD rule Temperature sensor discovery

Name Description Type Key and additional info
Temperature sensor discovery

MIKROTIK-MIB::mtxrHlTemperature

Since temperature sensor is not available on all Mikrotik hardware, this is done to avoid unsupported items.

 Dependent item mtxrHlTemperature.discovery

Preprocessing

  • SNMP walk to JSON

    ⛔️Custom on fail: Discard value

  • Discard unchanged with heartbeat: 1h

Item prototypes for Temperature sensor discovery

Name Description Type Key and additional info
Device: Temperature

MIB: MIKROTIK-MIB

mtxrHlTemperature Device temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

Reference: http://wiki.mikrotik.com/wiki/Manual:SNMP

 Dependent item sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.3.10.{#SNMPINDEX}

  • Custom multiplier: 0.1

  • Discard unchanged with heartbeat: 3m

Trigger prototypes for Temperature sensor discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: Device: Temperature is above warning threshold

This trigger uses temperature sensor values as well as temperature sensor status if available.

 avg(/Mikrotik by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)>{$TEMP_WARN:"Device"} Warning Depends on:
  • MikroTik: Device: Temperature is above critical threshold
MikroTik: Device: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available.

 avg(/Mikrotik by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"Device"} High
MikroTik: Device: Temperature is too low avg(/Mikrotik by SNMP/sensor.temp.value[mtxrHlTemperature.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"Device"} Average

LLD rule LTE modem discovery

Name Description Type Key and additional info
LTE modem discovery

MIKROTIK-MIB::mtxrLTEModemInterfaceIndex.

 Dependent item mtxrLTEModem.discovery

Preprocessing

  • SNMP walk to JSON

  • Discard unchanged with heartbeat: 1h

Item prototypes for LTE modem discovery

Name Description Type Key and additional info
Interface {#IFNAME}({#IFALIAS}): LTE modem RSSI

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSSI Received Signal Strength Indicator.

 Dependent item lte.modem.rssi[mtxrLTEModemSignalRSSI.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.16.1.1.2.{#SNMPINDEX}
Interface {#IFNAME}({#IFALIAS}): LTE modem RSRP

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRP Reference Signal Received Power.

 Dependent item lte.modem.rsrp[mtxrLTEModemSignalRSRP.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.16.1.1.4.{#SNMPINDEX}
Interface {#IFNAME}({#IFALIAS}): LTE modem RSRQ

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRQ Reference Signal Received Quality.

 Dependent item lte.modem.rsrq[mtxrLTEModemSignalRSRQ.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.16.1.1.3.{#SNMPINDEX}
Interface {#IFNAME}({#IFALIAS}): LTE modem SINR

MIB: MIKROTIK-MIB

mtxrLTEModemSignalSINR Signal to Interference & Noise Ratio.

 Dependent item lte.modem.sinr[mtxrLTEModemSignalSINR.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.16.1.1.7.{#SNMPINDEX}

Trigger prototypes for LTE modem discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: Interface {#IFNAME}({#IFALIAS}): LTE modem RSSI is low max(/Mikrotik by SNMP/lte.modem.rssi[mtxrLTEModemSignalRSSI.{#SNMPINDEX}],5m) < {$LTEMODEM.RSSI.MIN.WARN} Warning
MikroTik: Interface {#IFNAME}({#IFALIAS}): LTE modem RSRP is low max(/Mikrotik by SNMP/lte.modem.rsrp[mtxrLTEModemSignalRSRP.{#SNMPINDEX}],5m) < {$LTEMODEM.RSRP.MIN.WARN} Warning
MikroTik: Interface {#IFNAME}({#IFALIAS}): LTE modem RSRQ is low max(/Mikrotik by SNMP/lte.modem.rsrq[mtxrLTEModemSignalRSRQ.{#SNMPINDEX}],5m) < {$LTEMODEM.RSRQ.MIN.WARN} Warning
MikroTik: Interface {#IFNAME}({#IFALIAS}): LTE modem SINR is low max(/Mikrotik by SNMP/lte.modem.sinr[mtxrLTEModemSignalSINR.{#SNMPINDEX}],5m) < {$LTEMODEM.SINR.MIN.WARN} Warning

LLD rule AP channel discovery

Name Description Type Key and additional info
AP channel discovery

MIKROTIK-MIB::mtxrWlAp.

 Dependent item mtxrWlAp.discovery

Preprocessing

  • SNMP walk to JSON

  • Discard unchanged with heartbeat: 1h

Item prototypes for AP channel discovery

Name Description Type Key and additional info
Interface {#IFNAME}({#IFALIAS}): SSID

MIB: MIKROTIK-MIB

mtxrWlApSsid Service Set Identifier.

 Dependent item ssid.name[mtxrWlApSsid.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.3.1.4.{#SNMPINDEX}

  • Discard unchanged with heartbeat: 1h
Interface {#IFNAME}({#IFALIAS}): AP band

MIB: MIKROTIK-MIB

mtxrWlApBand

 Dependent item ssid.band[mtxrWlApBand.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.3.1.8.{#SNMPINDEX}

  • Discard unchanged with heartbeat: 1h
Interface {#IFNAME}({#IFALIAS}): AP noise floor

MIB: MIKROTIK-MIB

mtxrWlApNoiseFloor

 Dependent item ssid.noise[mtxrWlApNoiseFloor.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.3.1.9.{#SNMPINDEX}

  • Discard unchanged with heartbeat: 15m
Interface {#IFNAME}({#IFALIAS}): AP registered clients

MIB: MIKROTIK-MIB

mtxrWlApClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

 Dependent item ssid.regclient[mtxrWlApClientCount.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.3.1.6.{#SNMPINDEX}
Interface {#IFNAME}({#IFALIAS}): AP authenticated clients

MIB: MIKROTIK-MIB

mtxrWlApAuthClientCount Number of authentication clients.

 Dependent item ssid.authclient[mtxrWlApAuthClientCount.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.3.1.11.{#SNMPINDEX}

LLD rule CAPsMAN AP channel discovery

Name Description Type Key and additional info
CAPsMAN AP channel discovery

MIKROTIK-MIB::mtxrWlCMChannel.

 Dependent item mtxrWlCMChannel.discovery

Preprocessing

  • SNMP walk to JSON

  • Discard unchanged with heartbeat: 1h

Item prototypes for CAPsMAN AP channel discovery

Name Description Type Key and additional info
Interface {#IFNAME}({#IFALIAS}): AP channel

MIB: MIKROTIK-MIB

mtxrWlCMChannel

 Dependent item ssid.channel[mtxrWlCMChannel.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.7.1.5.{#SNMPINDEX}

  • Discard unchanged with heartbeat: 1h
Interface {#IFNAME}({#IFALIAS}): AP state

MIB: MIKROTIK-MIB

mtxrWlCMState Wireless interface state.

 Dependent item ssid.state[mtxrWlCMState.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.7.1.4.{#SNMPINDEX}

  • Discard unchanged with heartbeat: 1h
Interface {#IFNAME}({#IFALIAS}): AP registered clients

MIB: MIKROTIK-MIB

mtxrWlCMRegClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

 Dependent item ssid.regclient[mtxrWlCMRegClientCount.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.7.1.2.{#SNMPINDEX}
Interface {#IFNAME}({#IFALIAS}): AP authenticated clients

MIB: MIKROTIK-MIB

mtxrWlCMAuthClientCount Number of authentication clients.

 Dependent item ssid.authclient[mtxrWlCMAuthClientCount.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.4.1.14988.1.1.1.7.1.3.{#SNMPINDEX}

Trigger prototypes for CAPsMAN AP channel discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: Interface {#IFNAME}({#IFALIAS}): AP interface {#IFNAME}({#IFALIAS}) is not running

Access point interface can be not running by different reasons - disabled interface, power off, network link down.

 last(/Mikrotik by SNMP/ssid.state[mtxrWlCMState.{#SNMPINDEX}])<>"running-ap" Warning

LLD rule Storage discovery

Name Description Type Key and additional info
Storage discovery

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

 Dependent item storage.discovery

Preprocessing

  • SNMP walk to JSON

  • Discard unchanged with heartbeat: 1h

Item prototypes for Storage discovery

Name Description Type Key and additional info
Disk-{#SNMPINDEX}: Used space

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

 Dependent item vfs.fs.used[hrStorageSize.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.25.2.3.1.6.{#SNMPINDEX}

  • Custom multiplier: 1024
Disk-{#SNMPINDEX}: Total space

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

 Dependent item vfs.fs.total[hrStorageSize.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.25.2.3.1.5.{#SNMPINDEX}

  • Custom multiplier: 1024
Disk-{#SNMPINDEX}: Space utilization

The space utilization expressed in % for Disk-{#SNMPINDEX}.

 Calculated vfs.fs.pused[hrStorageSize.{#SNMPINDEX}]

Trigger prototypes for Storage discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: Disk-{#SNMPINDEX}: Disk space is critically low

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"}.
- The disk will be full in less than 24 hours.

 last(/Mikrotik by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"} and ((last(/Mikrotik by SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Mikrotik by SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<{$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"} or timeleft(/Mikrotik by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d) Average Manual close: Yes
MikroTik: Disk-{#SNMPINDEX}: Disk space is low

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"}.
- The disk will be full in less than 24 hours.

 last(/Mikrotik by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}])>{$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"} and ((last(/Mikrotik by SNMP/vfs.fs.total[hrStorageSize.{#SNMPINDEX}])-last(/Mikrotik by SNMP/vfs.fs.used[hrStorageSize.{#SNMPINDEX}]))<{$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"} or timeleft(/Mikrotik by SNMP/vfs.fs.pused[hrStorageSize.{#SNMPINDEX}],1h,100)<1d) Warning Manual close: Yes
Depends on:
  • MikroTik: Disk-{#SNMPINDEX}: Disk space is critically low

LLD rule Network interfaces discovery

Name Description Type Key and additional info
Network interfaces discovery

Discovering interfaces from IF-MIB.

 Dependent item net.if.discovery

Preprocessing

  • SNMP walk to JSON

  • Discard unchanged with heartbeat: 1h

Item prototypes for Network interfaces discovery

Name Description Type Key and additional info
Interface {#IFNAME}({#IFALIAS}): Operational status

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

 Dependent item net.if.status[ifOperStatus.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.2.2.1.8.{#SNMPINDEX}
Interface {#IFNAME}({#IFALIAS}): Bits received

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 Dependent item net.if.in[ifHCInOctets.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.31.1.1.1.6.{#SNMPINDEX}

  • Change per second

  • Custom multiplier: 8
Interface {#IFNAME}({#IFALIAS}): Bits sent

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 Dependent item net.if.out[ifHCOutOctets.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.31.1.1.1.10.{#SNMPINDEX}

  • Change per second

  • Custom multiplier: 8
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 Dependent item net.if.in.errors[ifInErrors.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.2.2.1.14.{#SNMPINDEX}

  • Change per second

  • Discard unchanged with heartbeat: 3m
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

 Dependent item net.if.out.errors[ifOutErrors.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.2.2.1.20.{#SNMPINDEX}

  • Change per second

  • Discard unchanged with heartbeat: 3m
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

 Dependent item net.if.out.discards[ifOutDiscards.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.2.2.1.19.{#SNMPINDEX}

  • Change per second

  • Discard unchanged with heartbeat: 3m
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

 Dependent item net.if.in.discards[ifInDiscards.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.2.2.1.13.{#SNMPINDEX}

  • Change per second

  • Discard unchanged with heartbeat: 3m
Interface {#IFNAME}({#IFALIAS}): Interface type

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

 Dependent item net.if.type[ifType.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.2.2.1.3.{#SNMPINDEX}

  • Discard unchanged with heartbeat: 1d
Interface {#IFNAME}({#IFALIAS}): Speed

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n, then the speed of the interface is somewhere in the range of n-500,000 to n+499,999.

For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.

For a sub-layer which has no concept of bandwidth, this object should be zero.

 Dependent item net.if.speed[ifHighSpeed.{#SNMPINDEX}]

Preprocessing

  • SNMP walk value: 1.3.6.1.2.1.31.1.1.1.15.{#SNMPINDEX}

  • Custom multiplier: 1000000

  • Discard unchanged with heartbeat: 1h

Trigger prototypes for Network interfaces discovery

Name Description Expression Severity Dependencies and additional info
MikroTik: Interface {#IFNAME}({#IFALIAS}): Link down

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine the context macro to "0", marking this interface as not important. No new trigger will be fired if this interface is down.
3. last(/TEMPLATE_NAME/METRIC,#1)<>last(/TEMPLATE_NAME/METRIC,#2) - the trigger fires only if the operational status was up to (1) sometime before (so, does not fire for "eternal off" interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

 {$IFCONTROL:"{#IFNAME}"}=1 and last(/Mikrotik by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Mikrotik by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Mikrotik by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2)) Average Manual close: Yes
MikroTik: Interface {#IFNAME}({#IFALIAS}): High bandwidth usage

The utilization of the network interface is close to its estimated maximum bandwidth.

 (avg(/Mikrotik by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Mikrotik by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Mikrotik by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Mikrotik by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Mikrotik by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 Warning Manual close: Yes
Depends on:
  • MikroTik: Interface {#IFNAME}({#IFALIAS}): Link down
MikroTik: Interface {#IFNAME}({#IFALIAS}): High error rate

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

 min(/Mikrotik by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Mikrotik by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} Warning Manual close: Yes
Depends on:
  • MikroTik: Interface {#IFNAME}({#IFALIAS}): Link down
MikroTik: Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

 change(/Mikrotik by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Mikrotik by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Mikrotik by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Mikrotik by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Mikrotik by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Mikrotik by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Mikrotik by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Mikrotik by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Mikrotik by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) Info Manual close: Yes
Depends on:
  • MikroTik: Interface {#IFNAME}({#IFALIAS}): Link down

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Articles and documentation

+ Propose new article

Media

Sie können die Integration nicht finden, die Sie benötigen?

Request custom integration

Zabbix integration team will develop custom integration based on your requirements and Zabbix best practices.

Request

Propose your integration

Have you already developed high quality integration and want to submit to Zabbix integration repository?

Propose