-

-

-

-

-

-

This macro is used in LTE modem discovery. It can be overridden on the host.

This macro is used in CAPsMAN AP channel discovery. It can be overridden on the host level.

The LTE modem RSRP minimum value for warning trigger expression.

The LTE modem RSRQ minimum value for warning trigger expression.

The LTE modem RSSI minimum value for warning trigger expression.

The LTE modem SINR minimum value for warning trigger expression.

-

Ignore notPresent(6)

Ignore down(2) administrative status

-

-

-

-

-

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

-

Ignore notPresent(6)

-

-

-

-

-

-

-

-

-

-

MIKROTIK-MIB::mtxrWlAp

Filter:

- {#IFTYPE} MATCHES_REGEX ^71$

- {#IFADMINSTATUS} MATCHES_REGEX ^1$

MIKROTIK-MIB::mtxrWlCMChannel

Filter:

- {#IFTYPE} MATCHES_REGEX ^1$

- {#IFNAME} MATCHES_REGEX {$IFNAME.WIFI.MATCHES}

HOST-RESOURCES-MIB::hrProcessorTable discovery

MIKROTIK-MIB::mtxrLTEModemInterfaceIndex

Filter:

- {#IFTYPE} MATCHES_REGEX ^1$

- {#IFNAME} MATCHES_REGEX {$IFNAME.LTEMODEM.MATCHES}

Discovering interfaces from IF-MIB.

Filter:

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- {#IFALIAS} MATCHES_REGEX {$NET.IF.IFALIAS.MATCHES}

- {#IFALIAS} NOT_MATCHES_REGEX {$NET.IF.IFALIAS.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

HOST-RESOURCES-MIB::hrStorage discovery with storage filter

Filter:

- {#STORAGE_TYPE} MATCHES_REGEX .+4$

- {#STORAGE_TYPE} MATCHES_REGEX .+hrStorageFixedDisk

MIKROTIK-MIB::mtxrHlProcessorTemperature

Since temperature of CPU is not available on all Mikrotik hardware, this is done to avoid unsupported items.

MIKROTIK-MIB::mtxrHlTemperature

Since temperature sensor is not available on all Mikrotik hardware, this is done to avoid unsupported items.

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that this processor was not idle. Implementations may approximate this one minute smoothing period if necessary.

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p> |SNMP |system.location[sysLocation.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:12h`

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its Fred Router'.</p> |SNMP |system.objectid[sysObjectID.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:12h`

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: MIKROTIK-MIB

Software version.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: MIKROTIK-MIB

RouterBOARD serial number.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: MIKROTIK-MIB

Current firmware version.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: 1024

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

Preprocessing:

- MULTIPLIER: 1024

Memory utilization in %.

Expression:

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range ofn-500,000' ton+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p> |SNMP |net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER:1000000</p><p>- DISCARD_UNCHANGED_HEARTBEAT:1h`

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing:

- CHECK_NOT_SUPPORTED

⛔️ON_FAIL: CUSTOM_VALUE -> 0

- MULTIPLIER: 0.01

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

-

-

-

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: 1024

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

Preprocessing:

- MULTIPLIER: 1024

Space utilization in % for Disk-{#SNMPINDEX}

Expression:

MIB: MIKROTIK-MIB

mtxrHlProcessorTemperature Processor temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

Preprocessing:

- MULTIPLIER: 0.1

MIB: MIKROTIK-MIB

mtxrHlTemperature Device temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

Reference: http://wiki.mikrotik.com/wiki/Manual:SNMP

Preprocessing:

- MULTIPLIER: 0.1

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSSI Received Signal Strength Indicator.

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRP Reference Signal Received Power.

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRQ Reference Signal Received Quality.

MIB: MIKROTIK-MIB

mtxrLTEModemSignalSINR Signal to Interference & Noise Ratio.

MIB: MIKROTIK-MIB

mtxrWlApSsid Service Set Identifier.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: MIKROTIK-MIB

mtxrWlApBand

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: MIKROTIK-MIB

mtxrWlApNoiseFloor

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 15m

MIB: MIKROTIK-MIB

mtxrWlApClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

MIB: MIKROTIK-MIB

mtxrWlApAuthClientCount Number of authentication clients.

MIB: MIKROTIK-MIB

mtxrWlCMChannel

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: MIKROTIK-MIB

mtxrWlCMState Wireless interface state.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: MIKROTIK-MIB

mtxrWlCMRegClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

MIB: MIKROTIK-MIB

mtxrWlCMAuthClientCount Number of authentication clients.

CPU utilization is too high. The system might be slow to respond.

System name has changed. Ack to close.

Manual close: YES

Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.

Manual close: YES

Depends on:

- System name has changed

Device serial number has changed. Ack to close

Manual close: YES

Firmware version has changed. Ack to close

Manual close: YES

The system is running out of free memory.

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

The network interface utilization is close to its estimated maximum bandwidth.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Uptime is less than 10 minutes.

Manual close: YES

Depends on:

- No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Depends on:

- Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

-

Depends on:

- Unavailable by ICMP ping

-

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}.

Second condition should be one of the following:

- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"}.

- The disk will be full in less than 24 hours.

Manual close: YES

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}.

Second condition should be one of the following:

- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"}.

- The disk will be full in less than 24 hours.

Manual close: YES

Depends on:

- Disk-{#SNMPINDEX}: Disk space is critically low

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- CPU: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

-

Recovery expression:

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- Device: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

-

Recovery expression:

-

-

-

-

Access point interface can be not running by different reasons - disabled interface, power off, network link down.

This macro is used in CAPsMAN AP channel discovery. It can be overridden on the host level.

This macro is used in LTE modem discovery. It can be overridden on the host.

The LTE modem RSSI minimum value for warning trigger expression.

The LTE modem RSRP minimum value for warning trigger expression.

The LTE modem RSRQ minimum value for warning trigger expression.

The LTE modem SINR minimum value for warning trigger expression.

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

Ignore notPresent(6)

Ignore notPresent(6)

Ignore down(2) administrative status

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing

• Custom multiplier: 1024

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

Preprocessing

• Custom multiplier: 1024

Memory utilization in %.

MIB: MIKROTIK-MIB

Software version.

Preprocessing

• Discard unchanged with heartbeat: 1d

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: MIKROTIK-MIB

RouterBOARD serial number.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: MIKROTIK-MIB

Current firmware version.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p>|SNMP agent|system.location[sysLocation.0]<p>**Preprocessing**</p><ul><li><p>Discard unchanged with heartbeat:12h`

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its Fred Router'.</p>|SNMP agent|system.objectid[sysObjectID.0]<p>**Preprocessing**</p><ul><li><p>Discard unchanged with heartbeat:12h`

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

The system is running out of free memory.

The description of the operating system has changed. Possible reasons are that the system has been updated or replaced. Acknowledge to close the problem manually.

• Mikrotik: System name has changed

Device serial number has changed. Acknowledge to close the problem manually.

Firmware version has changed. Acknowledge to close the problem manually.

Uptime is less than 10 minutes.

• Mikrotik: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Mikrotik: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Mikrotik: Unavailable by ICMP ping

• Mikrotik: High ICMP ping loss
• Mikrotik: Unavailable by ICMP ping

HOST-RESOURCES-MIB::hrProcessorTable discovery

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that this processor was not idle. Implementations may approximate this one minute smoothing period if necessary.

CPU utilization is too high. The system might be slow to respond.

MIKROTIK-MIB::mtxrHlProcessorTemperature

Since temperature of CPU is not available on all Mikrotik hardware, this is done to avoid unsupported items.

MIB: MIKROTIK-MIB

mtxrHlProcessorTemperature Processor temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

Preprocessing

• Custom multiplier: 0.1

This trigger uses temperature sensor values as well as temperature sensor status if available.

• CPU: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available.

MIKROTIK-MIB::mtxrHlTemperature

Since temperature sensor is not available on all Mikrotik hardware, this is done to avoid unsupported items.

MIB: MIKROTIK-MIB

mtxrHlTemperature Device temperature in Celsius (degrees C).

Might be missing in entry models (RB750, RB450G..).

Reference: http://wiki.mikrotik.com/wiki/Manual:SNMP

Preprocessing

• Custom multiplier: 0.1

This trigger uses temperature sensor values as well as temperature sensor status if available.

• Device: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available.

MIKROTIK-MIB::mtxrLTEModemInterfaceIndex

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSSI Received Signal Strength Indicator.

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRP Reference Signal Received Power.

MIB: MIKROTIK-MIB

mtxrLTEModemSignalRSRQ Reference Signal Received Quality.

MIB: MIKROTIK-MIB

mtxrLTEModemSignalSINR Signal to Interference & Noise Ratio.

MIKROTIK-MIB::mtxrWlAp

MIB: MIKROTIK-MIB

mtxrWlApSsid Service Set Identifier.

Preprocessing

• Discard unchanged with heartbeat: 1h

MIB: MIKROTIK-MIB

mtxrWlApBand

Preprocessing

• Discard unchanged with heartbeat: 1h

MIB: MIKROTIK-MIB

mtxrWlApNoiseFloor

Preprocessing

• Discard unchanged with heartbeat: 15m

MIB: MIKROTIK-MIB

mtxrWlApClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

MIB: MIKROTIK-MIB

mtxrWlApAuthClientCount Number of authentication clients.

MIKROTIK-MIB::mtxrWlCMChannel

MIB: MIKROTIK-MIB

mtxrWlCMChannel

Preprocessing

• Discard unchanged with heartbeat: 1h

MIB: MIKROTIK-MIB

mtxrWlCMState Wireless interface state.

Preprocessing

• Discard unchanged with heartbeat: 1h

MIB: MIKROTIK-MIB

mtxrWlCMRegClientCount Client established connection to AP, but didn't finish all authentication procedures for full connection.

MIB: MIKROTIK-MIB

mtxrWlCMAuthClientCount Number of authentication clients.

Access point interface can be not running by different reasons - disabled interface, power off, network link down.

HOST-RESOURCES-MIB::hrStorage discovery with storage filter

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing

• Custom multiplier: 1024

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in

units of hrStorageAllocationUnits. This object is

writable to allow remote configuration of the size of

the storage area in those cases where such an

operation makes sense and is possible on the

underlying system. For example, the amount of main

memory allocated to a buffer pool might be modified or

the amount of disk space allocated to virtual memory

might be modified.

Preprocessing

• Custom multiplier: 1024

The space utilization expressed in % for Disk-{#SNMPINDEX}.

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"Disk-{#SNMPINDEX}"}. Second condition should be one of the following: - The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"Disk-{#SNMPINDEX}"}. - The disk will be full in less than 24 hours.

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"Disk-{#SNMPINDEX}"}. Second condition should be one of the following: - The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"Disk-{#SNMPINDEX}"}. - The disk will be full in less than 24 hours.

• Disk-{#SNMPINDEX}: Disk space is critically low

Discovering interfaces from IF-MIB.

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range ofn-500,000' ton+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p>|SNMP agent|net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>**Preprocessing**</p><ul><li><p>Custom multiplier:1000000</p></li><li><p>Discard unchanged with heartbeat:1h`

This trigger expression works as follows:1. It can be triggered if the operations status is down.2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Interface {#IFNAME}({#IFALIAS}): Link down