A Zabbix proxy can collect performance and availability data on behalf of the Zabbix server. This way, a proxy can take on itself some of the load of collecting data and offload the Zabbix server.
Also, using a proxy is the easiest way of implementing centralized and distributed monitoring, when all agents and proxies report to one Zabbix server and all data is collected centrally.
A Zabbix proxy can be used to:
The proxy requires only one TCP connection to the Zabbix server. This way it is easier to get around a firewall as you only need to configure one firewall rule.
All data collected by the proxy is stored locally before transmitting it over to the server. This way no data is lost due to any temporary communication problems with the server. The ProxyLocalBuffer and ProxyOfflineBuffer parameters in the proxy configuration file control for how long the data are kept locally.
Zabbix proxy is a data collector. It does not calculate triggers, process events or send alerts. For an overview of what proxy functionality is, review the following table:
|Function||Supported by proxy|
|Zabbix agent checks||Yes|
|Zabbix agent checks (active)||Yes 1|
|Log file monitoring||Yes|
|Dependent items||Yes 2|
|Built-in web monitoring||Yes|
|Item value preprocessing||No|
To configure a proxy in Zabbix frontend:
|Proxy name||Enter the proxy name. It must be the same name as in the Hostname parameter in the proxy configuration file.|
|Proxy mode||Select the proxy mode.
Active - the proxy will connect to the Zabbix server and request configuration data
Passive - Zabbix server connects to the proxy
Note that without encrypted communications (sensitive) proxy configuration data may become available to parties having access to the Zabbix server trapper port when using an active proxy. This is possible because anyone may pretend to be an active proxy and request configuration data if authentication does not take place.
|Interface||Enter interface details for the passive proxy.
This field is only available if a passive proxy is selected in the Proxy mode field.
|IP address||IP address of the passive proxy (optional).|
|DNS name||DNS name of the passive proxy (optional).|
|Connect to||Clicking the respective button will tell Zabbix server what to use to retrieve data from proxy:
IP - Connect to the proxy IP address (recommended)
DNS - Connect to the proxy DNS name
|Port||TCP/UDP port number of the passive proxy (10051 by default).|
|Hosts||Add hosts to be monitored by the proxy.
Hosts already monitored by another proxy are greyed out in the Other hosts selection.
|Description||Enter the proxy description.|
The Encryption tab allows you to require encrypted connections with the proxy.
|Connections to proxy||How the server connects to the passive proxy: no encryption (default), using PSK (pre-shared key) or certificate.|
|Connections from proxy||Select what type of connections are allowed from the active proxy. Several connection types can be selected at the same time (useful for testing and switching to other connection type). Default is “No encryption”.|
|Issuer||Allowed issuer of certificate. Certificate is first validated with CA (certificate authority). If it is valid, signed by the CA, then the Issuer field can be used to further restrict allowed CA. This field is optional, intended to use if your Zabbix installation uses certificates from multiple CAs.|
|Subject||Allowed subject of certificate. Certificate is first validated with CA. If it is valid, signed by the CA, then the Subject field can be used to allow only one value of Subject string. If this field is empty then any valid certificate signed by the configured CA is accepted.|
|PSK identity||Pre-shared key identity string.|
|PSK||Pre-shared key (hex-string). Maximum length: 512 hex-digits (256-byte PSK) if Zabbix uses GnuTLS or OpenSSL library, 64 hex-digits (32-byte PSK) if Zabbix uses mbed TLS (PolarSSL) library. Example: 1f87b595725ac58dd977beef14b97461a7c1045b9a1c963065002c5473194952|