Zabbix + Dell hardware

MIBs used: HOST-RESOURCES-MIB IDRAC-MIB-SMIv2 SNMPv2-MIB You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/426752-discussion-thread-for-official-zabbix-dell-templates Generated by official Zabbix template tool "Templator"

Based on https://github.com/endersonmaia/zabbix-templates/tree/master/dell/idrac and the Chinese Dell iDRAC template. Chinese version translated back to english.

MIBs used: EtherLike-MIB HOST-RESOURCES-MIB SNMPv2-MIB IF-MIB DELLEMC-OS10-CHASSIS-MIB

This template was tested for Zabbix 6.0 and higher. This template was tested for DELL SC5020. License This template is distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. Source : https://github.com/lnwupan/Dell-Compellent-Zabbix-6.0-Template

MIBs used: DATA-DOMAIN-MIB SNMPv2-MIB IF-MIB

MIBs used: EtherLike-MIB HOST-RESOURCES-MIB SNMPv2-MIB IF-MIB DELLEMC-OS10-CHASSIS-MIB

MIBs used: DELL-RAC-MIB

IPMI readout for Dell PowerEdge M610 blades.Reading Power usage and temperature.

Good day!This is my first attempt at creating a public template. As far as I´m aware, it should be operatable on multiple Dell laser printers. The model this was created on was the ´Dell 3115CN´. Confirmed models that are supported:Dell 3115CNDell C1765NFWDell 2145CNI hope it´ll be of use to some of you. It´s been a fun project.

Template IPMI Dell PowerEdge R510

Template IPMI Dell PowerEdge 2950

my template for Dell Force C150 chassis.мой шаблон для шасси Dell Force C150

Created and configured in Zabbix 3.2By using SNMP, I believe it works in other versions.DELL MIBs requiredLink: https://www.dell.com/support/home/br/en/brbsdt1/drivers/driversdetails?driverId=M0KV7

IPMI sensors for Dell PowerEdge T620:Current 1, Current 2, Fan1 RPM, Fan2 RPM, Inlet Temp, Power, Pwr Consumption, Voltage 1, Voltage 2, Temp27/09/2016:Some changes and fixes.Add Temp Sensor.

IPMI sensors for Dell PowerEdge T420:Current 1, Current 2, Inlet Temp, Power, Pwr Consumption, Sys Fan1 RPM, Temp, Voltage 1, Voltage 227/09/2016:Some changes and fixes.

IPMI sensors for Dell PowerEdge T320:Current 1, Current 2, Inlet Temp, Power, Pwr Consumption, Sys Fan1 RPM, Temp, Voltage 1, Voltage 227/09/2016:Some changes and fixes.

Simple template for Dell T310 IPMI monitoring.Contains:4 sensors (Fan, Temp, Power state and consumption)8 triggers (Fan speed too slow, Temp too high, Power down, Power consumption too high)2 graphics (Fan speed + Temp, Power consumption)Is lightweight, keeps data for 7 days, except for temperature and power consumption (90d)

IPMI sensors for Dell PowerEdge T300:Ambient Temp, FAN 1 RPM, FAN 2 RPM, Planar Temp, Power27/09/2016:Some changes and fixes.

Simple IPMI template fetching:Read Chassis TemperatureRead System VoltageRead Fan speedsRead Power (Voltage/Watts)

Simple IPMI template fetching:Read Chassis TemperatureRead System VoltageRead Fan speedsRead Power (Voltage/Watts)

Basic template to retrieve sensors from a C6220 node´s BMC.If you are trying to build an IPMI template for your own server, I highly recommend installing the freeipmi-tools package and running ipmi-sensors.

IPMI sensors for Dell PowerEdge 2900:Ambient Temp, FAN 1 RPM, FAN 2 RPM, FAN 3 RPM, FAN 4 RPM, FAN 5 RPM, FAN 6 RPM, Power27/09/2016:Some changes and fixes.

IPMI sensors for Dell PowerEdge 1950:Ambient Temp, FAN MOD 1A RPM, FAN MOD 1B RPM, FAN MOD 1C RPM, FAN MOD 1D RPM, FAN MOD 2A RPM, FAN MOD 2B RPM, FAN MOD 2C RPM, FAN MOD 2D RPM, FAN MOD 3A RPM, FAN MOD 3B RPM, FAN MOD 3C RPM, FAN MOD 3D RPM, FAN MOD 4A RPM, FAN MOD 4B RPM, FAN MOD 4C RPM, FAN MOD 4D RPM, Power27/09/2016:Some changes and fixes.

这是Dell iDRAC模板的中文化版本，同时进行了修正以支持zabbix3.0，感谢原作者

Zabbix template for DELL OpenManage via SNMP

Esse é um Template do Zabbix que trata TRAPs enviadas de placas iDRAC da Dell.Esse Template foi testado em iDRACs de servidores Dell Power Edge R410, R420 e R430.This is a Zabbix template that handles TRAPs generated by iDRAC boards from DELL.This template has been tested on iDRACs version 6, 7 and 8 from servers: Dell Power Edge R410, R420 and R430.

The script runs SMcli and gets Storage PerformanceStats, parses and sends to Zabbix server The script is working under python 3.6