Athough I´ve seen some Emerson templates, none of them worked with my UPS GXT3-XXXXX. So I created this template with lld for the UPS outputs and some itens that I usually need (like % Load).It´s basic but can help someone in need some day.Battery Charge Status, Battery Charge Remaining %, Battery Voltage, System Info (Contact, Uptime, Serial, Firmware and etc), Output Load and Input Voltageps: There´s a macro for SNMP community, so you might want to change it.Tested in Zabbix 3.4.3Cheers!##################Embora eu já tenha visto alguns templates de No-Breaks Emerson na internet, nenhum deles funcionou com meu equipamento (modelo GXT3-XXXX). Então eu criei este template com lld para descobrir as saidas e criar as % de carga de cada saída.É um template básico mas pode ajudar alguém algum dia.Carga de Bateria, Status da Bateris, Carga Restante (em %), Carga Restante (em min), Voltagem da Bateria, Informações do Equipamento (Nome, Tempo sem desligar, número de série, versão do firmware e etc), Carga de Saida e Tensão de Entrada.Obs: Há uma macro criada para a community do SNMP, então talvez você queira alterar.Sucesso!Luiz Fernando Gondin Santos
Includes 47 items, 1 Trigger, 8 GraphsPlease set {$SNMP_COMMUNITY} macro for host.
Suitable for Emerson NXR UPS serieszabbix 5.0referencehttps://exchange.nagios.org/directory/Plugins/Hardware/UPS/Liebert/Check-Liebert-NXR-2DUPS-(30kVA)/detailsThe OID value of the searchThe status mapping value 0 is normal!