The critical value of the PSU sensor for trigger expression.

The critical value of the FAN sensor for trigger expression.

The critical value of the TEMP sensor for trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The temperature minimum critical value for trigger expression.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

The warning threshold of the "Physical memory: Memory utilization" item.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default.

Ignore notPresent(6).

Ignore down(2) administrative status.

The time interval for SNMP agent availability trigger expression.

The critical threshold of the filesystem utilization.

The warning threshold of the filesystem utilization.

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that processors was not idle.

Implementations may approximate this one minute smoothing period if necessary.

Preprocessing

• JSON Path: $..['{#CPU.UTIL}'].avg()

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

The CPU utilization is too high. The system might be slow to respond.

Uptime is less than 10 minutes.

• Mellanox: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Mellanox: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Mellanox: Unavailable by ICMP ping

• Mellanox: High ICMP ping loss
• Mellanox: Unavailable by ICMP ping

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with temperature filter

Preprocessing

• JavaScript: The text is too long. Please see the template.

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

Preprocessing

• Custom multiplier: 0.1

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}. Possible values:

- ok(1) indicates that the agent can obtain the sensor value.

- unavailable(2) indicates that the agent presently cannot obtain the sensor value.

- nonoperational(3) indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_INFO}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter

Preprocessing

• JavaScript: The text is too long. Please see the template.

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}

Please check the fan unit

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: ENTITY-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

Device serial number has changed. Acknowledge to close the problem manually.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-STATE-MIB

Please check the power supply unit for errors

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main storage allocated to a buffer pool might be modified or the amount of disk space allocated to virtual storage might be modified.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

The space utilization expressed in % for {#FSNAME}.

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"{#FSNAME}"}.
- The disk will be full in less than 24 hours.

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"{#FSNAME}"}.
- The disk will be full in less than 24 hours.

• {#FSNAME}: Disk space is critically low

HOST-RESOURCES-MIB::hrStorage discovery with memory filter

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

Memory utilization in %.

The system is running out of free memory.

Discovering interfaces from IF-MIB.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing

• Custom multiplier: 1000000

• Discard unchanged with heartbeat: 1h

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Interface {#IFNAME}({#IFALIAS}): Link down

-

The critical value of the FAN sensor for trigger expression.

-

-

-

-

-

-

-

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

The warning threshold of the "Physical memory: Memory utilization" item.

Ignore notPresent(6)

Ignore down(2) administrative status.

-

-

-

-

-

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default.

-

Ignore notPresent(6).

-

-

The critical value of the PSU sensor for trigger expression.

The time interval for SNMP agent availability trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The temperature minimum critical value for trigger expression.

The critical value of the TEMP sensor for trigger expression.

The critical threshold of the filesystem utilization.

The warning threshold of the filesystem utilization.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

-

-

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#ENT_CLASS} MATCHES_REGEX 3

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#SNMPVALUE} MATCHES_REGEX 10

HOST-RESOURCES-MIB::hrStorage discovery with memory filter

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#MEMTYPE} MATCHES_REGEX {$MEMORY.TYPE.MATCHES}

- {#MEMTYPE} NOT_MATCHES_REGEX {$MEMORY.TYPE.NOT_MATCHES}

- {#MEMNAME} MATCHES_REGEX {$MEMORY.NAME.MATCHES}

- {#MEMNAME} NOT_MATCHES_REGEX {$MEMORY.NAME.NOT_MATCHES}

Discovering interfaces from IF-MIB.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- {#IFALIAS} MATCHES_REGEX {$NET.IF.IFALIAS.MATCHES}

- {#IFALIAS} NOT_MATCHES_REGEX {$NET.IF.IFALIAS.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#ENT_CLASS} MATCHES_REGEX 6

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#FSTYPE} MATCHES_REGEX {$VFS.FS.FSTYPE.MATCHES}

- {#FSTYPE} NOT_MATCHES_REGEX {$VFS.FS.FSTYPE.NOT_MATCHES}

- {#FSNAME} MATCHES_REGEX {$VFS.FS.FSNAME.MATCHES}

- {#FSNAME} NOT_MATCHES_REGEX {$VFS.FS.FSNAME.NOT_MATCHES}

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with temperature filter

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#SENSOR_TYPE} MATCHES_REGEX 8

- {#SENSOR_PRECISION} MATCHES_REGEX 1

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that processors was not idle.

Implementations may approximate this one minute smoothing period if necessary.

Preprocessing:

- JSONPATH: $..['{#CPU.UTIL}'].avg()

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: ENTITY-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: ENTITY-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

Memory utilization in %.

Expression:

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing:

- MULTIPLIER: 1000000

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: ENTITY-STATE-MIB

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing:

- CHECK_NOT_SUPPORTED

⛔️ON_FAIL: CUSTOM_VALUE -> 0

- MULTIPLIER: 0.01

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

-

-

-

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main storage allocated to a buffer pool might be modified or the amount of disk space allocated to virtual storage might be modified.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

Space utilization in % for {#FSNAME}

Expression:

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

Preprocessing:

- MULTIPLIER: 0.1

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}. Possible values:

- ok(1) indicates that the agent can obtain the sensor value.

- unavailable(2) indicates that the agent presently cannot obtain the sensor value.

- nonoperational(3) indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.

CPU utilization is too high. The system might be slow to respond.

Please check the fan unit

System name has changed. Ack to close.

Manual close: YES

Device serial number has changed. Ack to close

Manual close: YES

The system is running out of free memory.

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

The network interface utilization is close to its estimated maximum bandwidth.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Please check the power supply unit for errors

Uptime is less than 10 minutes.

Manual close: YES

Depends on:

- No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Depends on:

- Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

-

Depends on:

- Unavailable by ICMP ping

-

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.

Second condition should be one of the following:

- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"{#FSNAME}"}.

- The disk will be full in less than 24 hours.

Manual close: YES

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.

Second condition should be one of the following:

- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"{#FSNAME}"}.

- The disk will be full in less than 24 hours.

Manual close: YES

Depends on:

- {#FSNAME}: Disk space is critically low

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_INFO}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

-

Recovery expression:

The critical value of the PSU sensor for trigger expression.

The critical value of the FAN sensor for trigger expression.

The critical value of the TEMP sensor for trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The temperature minimum critical value for trigger expression.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

The warning threshold of the "Physical memory: Memory utilization" item.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default.

Ignore notPresent(6).

Ignore down(2) administrative status.

The time interval for SNMP agent availability trigger expression.

The critical threshold of the filesystem utilization.

The warning threshold of the filesystem utilization.

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that processors was not idle.

Implementations may approximate this one minute smoothing period if necessary.

Preprocessing

• JSON Path: $..['{#CPU.UTIL}'].avg()

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

The CPU utilization is too high. The system might be slow to respond.

Uptime is less than 10 minutes.

• Mellanox: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Mellanox: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Mellanox: Unavailable by ICMP ping

• Mellanox: High ICMP ping loss
• Mellanox: Unavailable by ICMP ping

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with temperature filter

Preprocessing

• JavaScript: The text is too long. Please see the template.

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

Preprocessing

• Custom multiplier: 0.1

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}. Possible values:

- ok(1) indicates that the agent can obtain the sensor value.

- unavailable(2) indicates that the agent presently cannot obtain the sensor value.

- nonoperational(3) indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.

This trigger uses temperature sensor values as well as temperature sensor status if available

• {#SENSOR_INFO}: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter

Preprocessing

• JavaScript: The text is too long. Please see the template.

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}

Please check the fan unit

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: ENTITY-MIB

Preprocessing

• Discard unchanged with heartbeat: 1d

Device serial number has changed. Acknowledge to close the problem manually.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: ENTITY-STATE-MIB

Please check the power supply unit for errors

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main storage allocated to a buffer pool might be modified or the amount of disk space allocated to virtual storage might be modified.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

The space utilization expressed in % for {#FSNAME}.

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"{#FSNAME}"}.
- The disk will be full in less than 24 hours.

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.
Second condition should be one of the following:
- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"{#FSNAME}"}.
- The disk will be full in less than 24 hours.

• {#FSNAME}: Disk space is critically low

HOST-RESOURCES-MIB::hrStorage discovery with memory filter

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.

Preprocessing

• Custom multiplier: {#ALLOC_UNITS}

Memory utilization in %.

The system is running out of free memory.

Discovering interfaces from IF-MIB.

Preprocessing

• Discard unchanged with heartbeat: 6h

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing

• Custom multiplier: 1000000

• Discard unchanged with heartbeat: 1h

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Interface {#IFNAME}({#IFALIAS}): Link down

-

The critical value of the FAN sensor for trigger expression.

-

-

-

-

-

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

The warning threshold of the "Physical memory: Memory utilization" item.

Ignore notPresent(6)

Ignore down(2) administrative status.

-

-

-

-

-

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default.

-

Ignore notPresent(6).

-

-

The critical value of the PSU sensor for trigger expression.

The time interval for SNMP agent availability trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The temperature minimum critical value for trigger expression.

The critical value of the TEMP sensor for trigger expression.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

-

-

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with celsius filter

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#SENSOR_TYPE} MATCHES_REGEX 8

- {#SENSOR_PRECISION} MATCHES_REGEX 1

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#SNMPVALUE} MATCHES_REGEX 10

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#ENT_CLASS} MATCHES_REGEX 3

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#ENT_CLASS} MATCHES_REGEX 6

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#FSTYPE} MATCHES_REGEX {$VFS.FS.FSTYPE.MATCHES}

- {#FSTYPE} NOT_MATCHES_REGEX {$VFS.FS.FSTYPE.NOT_MATCHES}

- {#FSNAME} MATCHES_REGEX {$VFS.FS.FSNAME.MATCHES}

- {#FSNAME} NOT_MATCHES_REGEX {$VFS.FS.FSNAME.NOT_MATCHES}

HOST-RESOURCES-MIB::hrStorage discovery with memory filter

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#MEMTYPE} MATCHES_REGEX {$MEMORY.TYPE.MATCHES}

- {#MEMTYPE} NOT_MATCHES_REGEX {$MEMORY.TYPE.NOT_MATCHES}

- {#MEMNAME} MATCHES_REGEX {$MEMORY.NAME.MATCHES}

- {#MEMNAME} NOT_MATCHES_REGEX {$MEMORY.NAME.NOT_MATCHES}

Discovering interfaces from IF-MIB.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- {#IFALIAS} MATCHES_REGEX {$NET.IF.IFALIAS.MATCHES}

- {#IFALIAS} NOT_MATCHES_REGEX {$NET.IF.IFALIAS.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that processors was not idle.

Implementations may approximate this one minute smoothing period if necessary.

Preprocessing:

- JSONPATH: $..['{#CPU.UTIL}'].avg()

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: ENTITY-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: ENTITY-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

Memory utilization in %

Expression:

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned NumbersAuthority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing:

- MULTIPLIER: 1000000

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: ENTITY-STATE-MIB

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

-

-

-

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main storage allocated to a buffer pool might be modified or the amount of disk space allocated to virtual storage might be modified.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

Space utilization in % for {#FSNAME}

Expression:

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

Preprocessing:

- MULTIPLIER: 0.1

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}. Possible values:

- ok(1) indicates that the agent can obtain the sensor value.

- unavailable(2) indicates that the agent presently cannot obtain the sensor value.

- nonoperational(3) indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.

CPU utilization is too high. The system might be slow to respond.

Please check the fan unit

System name has changed. Ack to close.

Manual close: YES

Device serial number has changed. Ack to close

Manual close: YES

The system is running out of free memory.

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

The network interface utilization is close to its estimated maximum bandwidth.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Please check the power supply unit for errors

Uptime is less than 10 minutes

Manual close: YES

Depends on:

- No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Depends on:

- Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

-

Depends on:

- Unavailable by ICMP ping

-

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.

Second condition should be one of the following:

- The disk free space is less than 5G.

- The disk will be full in less than 24 hours.

Manual close: YES

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.

Second condition should be one of the following:

- The disk free space is less than 10G.

- The disk will be full in less than 24 hours.

Manual close: YES

Depends on:

- {#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%)

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_INFO}: Temperature is above critical threshold: >{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

-

Recovery expression:

-

The critical value of the FAN sensor for trigger expression.

-

-

-

-

-

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

This macro is used in memory discovery. Can be overridden on the host level.

This macro is used in memory discovery. Can be overridden on the host level if you need to filter out results.

The warning threshold of the "Physical memory: Memory utilization" item.

Ignore notPresent(6)

Ignore down(2) administrative status.

-

-

-

-

-

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default.

-

Ignore notPresent(6).

-

-

The critical value of the PSU sensor for trigger expression.

The time interval for SNMP agent availability trigger expression.

The temperature maximum critical value for trigger expression.

The temperature maximum warning value for trigger expression.

The temperature minimum critical value for trigger expression.

The critical value of the TEMP sensor for trigger expression.

The critical threshold of the filesystem utilization.

The warning threshold of the filesystem utilization.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

This macro is used in filesystems discovery. Can be overridden on the host level.

-

-

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with celsius filter

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- B: {#SENSOR_TYPE} MATCHES_REGEX 8

- B: {#SENSOR_PRECISION} MATCHES_REGEX 1

ENTITY-SENSORS-MIB::EntitySensorDataType discovery with rpm filter

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- B: {#SNMPVALUE} MATCHES_REGEX 10

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- A: {#ENT_CLASS} MATCHES_REGEX 3

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- A: {#ENT_CLASS} MATCHES_REGEX 6

HOST-RESOURCES-MIB::hrStorage discovery with storage filter.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- A: {#FSTYPE} MATCHES_REGEX {$VFS.FS.FSTYPE.MATCHES}

- B: {#FSTYPE} NOT_MATCHES_REGEX {$VFS.FS.FSTYPE.NOT_MATCHES}

- C: {#FSNAME} MATCHES_REGEX {$VFS.FS.FSNAME.MATCHES}

- D: {#FSNAME} NOT_MATCHES_REGEX {$VFS.FS.FSNAME.NOT_MATCHES}

HOST-RESOURCES-MIB::hrStorage discovery with memory filter

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- A: {#MEMTYPE} MATCHES_REGEX {$MEMORY.TYPE.MATCHES}

- B: {#MEMTYPE} NOT_MATCHES_REGEX {$MEMORY.TYPE.NOT_MATCHES}

- C: {#MEMNAME} MATCHES_REGEX {$MEMORY.NAME.MATCHES}

- D: {#MEMNAME} NOT_MATCHES_REGEX {$MEMORY.NAME.NOT_MATCHES}

Discovering interfaces from IF-MIB.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Filter:

- A: {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- B: {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- C: {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- D: {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- E: {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- F: {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- G: {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- H: {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- I: {#IFALIAS} MATCHES_REGEX {$NET.IF.IFALIAS.MATCHES}

- J: {#IFALIAS} NOT_MATCHES_REGEX {$NET.IF.IFALIAS.NOT_MATCHES}

- K: {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- L: {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

MIB: HOST-RESOURCES-MIB

The average, over the last minute, of the percentage of time that processors was not idle.

Implementations may approximate this one minute smoothing period if necessary.

Preprocessing:

- JSONPATH: $..['{#CPU.UTIL}'].avg()

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: ENTITY-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: ENTITY-MIB

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

Memory utilization in %.

Expression:

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range of n-500,000' to`n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.

Preprocessing:

- MULTIPLIER: 1000000

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: ENTITY-STATE-MIB

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

-

-

-

MIB: HOST-RESOURCES-MIB

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

MIB: HOST-RESOURCES-MIB

The size of the storage represented by this entry, in units of hrStorageAllocationUnits.

This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system.

For example, the amount of main storage allocated to a buffer pool might be modified or the amount of disk space allocated to virtual storage might be modified.

Preprocessing:

- MULTIPLIER: {#ALLOC_UNITS}

Space utilization in % for {#FSNAME}

Expression:

MIB: ENTITY-SENSORS-MIB

The most recent measurement obtained by the agent for this sensor.

To correctly interpret the value of this object, the associated entPhySensorType,

entPhySensorScale, and entPhySensorPrecision objects must also be examined.

Preprocessing:

- MULTIPLIER: 0.1

MIB: ENTITY-SENSORS-MIB

The operational status of the sensor {#SENSOR_INFO}. Possible values:

- ok(1) indicates that the agent can obtain the sensor value.

- unavailable(2) indicates that the agent presently cannot obtain the sensor value.

- nonoperational(3) indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings.

CPU utilization is too high. The system might be slow to respond.

Please check the fan unit

System name has changed. Ack to close.

Manual close: YES

Device serial number has changed. Ack to close

Manual close: YES

The system is running out of free memory.

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

The network interface utilization is close to its estimated maximum bandwidth.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Please check the power supply unit for errors

Uptime is less than 10 minutes.

Manual close: YES

Depends on:

- No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Depends on:

- Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

-

Depends on:

- Unavailable by ICMP ping

-

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}.

Second condition should be one of the following:

- The disk free space is less than {$VFS.FS.FREE.MIN.CRIT:"{#FSNAME}"}.

- The disk will be full in less than 24 hours.

Manual close: YES

Two conditions should match: First, space utilization should be above {$VFS.FS.PUSED.MAX.WARN:"{#FSNAME}"}.

Second condition should be one of the following:

- The disk free space is less than {$VFS.FS.FREE.MIN.WARN:"{#FSNAME}"}.

- The disk will be full in less than 24 hours.

Manual close: YES

Depends on:

- {#FSNAME}: Disk space is critically low (used > {$VFS.FS.PUSED.MAX.CRIT:"{#FSNAME}"}%)

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

Depends on:

- {#SENSOR_INFO}: Temperature is above critical threshold: >{$TEMP.MAX.CRIT:"{#SENSOR_INFO}"}

This trigger uses temperature sensor values as well as temperature sensor status if available

Recovery expression:

-

Recovery expression: