Available solutions

User guide to setting up Zabbix monitoring of the Morningstar products
Morningstar ProStar MPPT by SNMP
Morningstar ProStar PWM by SNMP
Morningstar SunSaver MPPT by SNMP
Morningstar SureSine by SNMP
Morningstar TriStar MPPT by SNMP
Morningstar TriStar MPPT 600V by SNMP
Morningstar TriStar PWM by SNMP

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar

User guide to setting up Zabbix monitoring of the Morningstar products

Zabbix provides a powerful automated solution for monitoring the state of Morningstar products. For example, if the device battery voltage is too low or a battery temperature drops below a given threshold, the system will generate an alert and send it to your preferred notification channel (e-mail/phone/Jira/Slack/or many others). The full list of alerts depends on the device - see the individual template documentation for details. This guide explains how to get Zabbix and configure the software for monitoring.

Pre-requisites and installation

Zabbix is an open-source product that can be installed on a majority of Unix-like distributions at no cost - see full list of supported distributions. Alternatively, Zabbix is available on certain cloud services.

Install Zabbix following instructions from the downloads page for your preferred installation method.
Download monitoring templates suitable for your Morningstar products to the computer.
Supported Morningstar products

Product	Readme	Template
Prostar MPPT	Readme	Template
Prostar PWM	Readme	Template
Sunsaver MPPT	Readme	Template
Suresine	Readme	Template
Tristar MPPT 600V	Readme	Template
Tristar MPPT	Readme	Template
Tristar PWM	Readme	Template

Zabbix set up

Log in to Zabbix.
Using a sidebar menu at the left, navigate to the Configuration -> Templates section. Import the downloaded template into Zabbix by following these steps:

Press the Import button in the top right corner
Select the YAML file of the required template on your machine
Press Import

Now you need to teach Zabbix how to connect to the device. To do so, first create a host to represent your Morningstar device:

Using a sidebar menu at the left, navigate to the Configuration -> Hosts section
Press the Create host button in the top right corner
In the Host configuration window fill in the required fields:
- Host name - enter any unique name
- Groups - select an existing host group or enter the name of a new group to be created
- Interfaces - press Add and select SNMP from the drop-down list that appears.
Add an SNMP interface for the host:
- Enter the IP address/DNS name and port number
- Select the SNMP v2 from the dropdown
- In the SNMP community field enter 'public'
- Turn off the Use bulk requests checkbox because devices do not work correctly in this mode
Open the Templates tab. In the Link new templates field, start typing Morningstar, then select the imported template from the list.

Repeat step 3 for each Morningstar device you want to monitor.

By now, Zabbix is configured to generate alerts if something goes wrong with the device. The alerts will be displayed in the Zabbix dashboard. If you would like to receive notifications about problems by e-mail, phone, or some other channel, follow instructions for configuring notifications upon events provided in Zabbix documentation.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Install Zabbix following instructions from the downloads page for your preferred installation method.
Download monitoring templates suitable for your Morningstar products to the computer.
Supported Morningstar products

Product	Readme	Template
Prostar MPPT	Readme	Template
Prostar PWM	Readme	Template
Sunsaver MPPT	Readme	Template
Suresine	Readme	Template
Tristar MPPT 600V	Readme	Template
Tristar MPPT	Readme	Template
Tristar PWM	Readme	Template

Zabbix set up

Log in to Zabbix.
Using a sidebar menu at the left, navigate to the Configuration -> Templates section. Import the downloaded template into Zabbix by following these steps:

Press the Import button in the top right corner
Select the YAML file of the required template on your machine
Press Import

Now you need to teach Zabbix how to connect to the device. To do so, first create a host to represent your Morningstar device:

Using a sidebar menu at the left, navigate to the Configuration -> Hosts section
Press the Create host button in the top right corner
In the Host configuration window fill in the required fields:
- Host name - enter any unique name
- Groups - select an existing host group or enter the name of a new group to be created
- Interfaces - press Add and select SNMP from the drop-down list that appears.
Add an SNMP interface for the host:
- Enter the IP address/DNS name and port number
- Select the SNMP v2 from the dropdown
- In the SNMP community field enter 'public'
- Turn off the Use bulk requests checkbox because devices do not work correctly in this mode
Open the Templates tab. In the Link new templates field, start typing Morningstar, then select the imported template from the list.

Repeat step 3 for each Morningstar device you want to monitor.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Install Zabbix following instructions from the downloads page for your preferred installation method.
Download monitoring templates suitable for your Morningstar products to the computer.
Supported Morningstar products

Product	Readme	Template
Prostar MPPT	Readme	Template
Prostar PWM	Readme	Template
Sunsaver MPPT	Readme	Template
Suresine	Readme	Template
Tristar MPPT 600V	Readme	Template
Tristar MPPT	Readme	Template
Tristar PWM	Readme	Template

Zabbix set up

Log in to Zabbix.
Using a sidebar menu at the left, navigate to the Configuration -> Templates section. Import the downloaded template into Zabbix by following these steps:

Press the Import button in the top right corner
Select the YAML file of the required template on your machine
Press Import

Now you need to teach Zabbix how to connect to the device. To do so, first create a host to represent your Morningstar device:

Using a sidebar menu at the left, navigate to the Configuration -> Hosts section
Press the Create host button in the top right corner
In the Host configuration window fill in the required fields:
- Host name - enter any unique name
- Groups - select an existing host group or enter the name of a new group to be created
- Interfaces - press Add and select SNMP from the drop-down list that appears.
Add an SNMP interface for the host:
- Enter the IP address/DNS name and port number
- Select the SNMP v2 from the dropdown
- In the SNMP community field enter 'public'
- Turn off the Use bulk requests checkbox because devices do not work correctly in this mode
Open the Templates tab. In the Link new templates field, start typing Morningstar, then select the imported template from the list.

Repeat step 3 for each Morningstar device you want to monitor.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Install Zabbix following instructions from the downloads page for your preferred installation method.
Download monitoring templates suitable for your Morningstar products to the computer.
Supported Morningstar products

Product	Readme	Template
Prostar MPPT	Readme	Template
Prostar PWM	Readme	Template
Sunsaver MPPT	Readme	Template
Suresine	Readme	Template
Tristar MPPT 600V	Readme	Template
Tristar MPPT	Readme	Template
Tristar PWM	Readme	Template

Zabbix set up

Log in to Zabbix.
Using a sidebar menu at the left, navigate to the Configuration -> Templates section. Import the downloaded template into Zabbix by following these steps:

Press the Import button in the top right corner
Select the YAML file of the required template on your machine
Press Import

Now you need to teach Zabbix how to connect to the device. To do so, first create a host to represent your Morningstar device:

Using a sidebar menu at the left, navigate to the Configuration -> Hosts section
Press the Create host button in the top right corner
In the Host configuration window fill in the required fields:
- Host name - enter any unique name
- Groups - select an existing host group or enter the name of a new group to be created
- Interfaces - press Add and select SNMP from the drop-down list that appears.
Add an SNMP interface for the host:
- Enter the IP address/DNS name and port number
- Select the SNMP v2 from the dropdown
- In the SNMP community field enter 'public'
- Turn off the Use bulk requests checkbox because devices do not work correctly in this mode
Open the Templates tab. In the Link new templates field, start typing Morningstar, then select the imported template from the list.

Repeat step 3 for each Morningstar device you want to monitor.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Install Zabbix following instructions from the downloads page for your preferred installation method.
Download monitoring templates suitable for your Morningstar products to the computer.
Supported Morningstar products

Product	Readme	Template
Prostar MPPT	Readme	Template
Prostar PWM	Readme	Template
Sunsaver MPPT	Readme	Template
Suresine	Readme	Template
Tristar MPPT 600V	Readme	Template
Tristar MPPT	Readme	Template
Tristar PWM	Readme	Template

Zabbix set up

Log in to Zabbix.
Using a sidebar menu at the left, navigate to the Configuration -> Templates section. Import the downloaded template into Zabbix by following these steps:

Press the Import button in the top right corner
Select the YAML file of the required template on your machine
Press Import

Now you need to teach Zabbix how to connect to the device. To do so, first create a host to represent your Morningstar device:

Using a sidebar menu at the left, navigate to the Configuration -> Hosts section
Press the Create host button in the top right corner
In the Host configuration window fill in the required fields:
- Host name - enter any unique name
- Groups - select an existing host group or enter the name of a new group to be created
- Interfaces - press Add and select SNMP from the drop-down list that appears.
Add an SNMP interface for the host:
- Enter the IP address/DNS name and port number
- Select the SNMP v2 from the dropdown
- In the SNMP community field enter 'public'
- Turn off the Use bulk requests checkbox because devices do not work correctly in this mode
Open the Templates tab. In the Link new templates field, start typing Morningstar, then select the imported template from the list.

Repeat step 3 for each Morningstar device you want to monitor.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Install Zabbix following instructions from the downloads page for your preferred installation method.
Download monitoring templates suitable for your Morningstar products to the computer.
Supported Morningstar products

Product	Readme	Template
Prostar MPPT	Readme	Template
Prostar PWM	Readme	Template
Sunsaver MPPT	Readme	Template
Suresine	Readme	Template
Tristar MPPT 600V	Readme	Template
Tristar MPPT	Readme	Template
Tristar PWM	Readme	Template

Zabbix set up

Log in to Zabbix.
Using a sidebar menu at the left, navigate to the Configuration -> Templates section. Import the downloaded template into Zabbix by following these steps:

Press the Import button in the top right corner
Select the YAML file of the required template on your machine
Press Import

Now you need to teach Zabbix how to connect to the device. To do so, first create a host to represent your Morningstar device:

Using a sidebar menu at the left, navigate to the Configuration -> Hosts section
Press the Create host button in the top right corner
In the Host configuration window fill in the required fields:
- Host name - enter any unique name
- Groups - select an existing host group or enter the name of a new group to be created
- Interfaces - press Add and select SNMP from the drop-down list that appears.
Add an SNMP interface for the host:
- Enter the IP address/DNS name and port number
- Select the SNMP v2 from the dropdown
- In the SNMP community field enter 'public'
- Turn off the Use bulk requests checkbox because devices do not work correctly in this mode
Open the Templates tab. In the Link new templates field, start typing Morningstar, then select the imported template from the list.

Repeat step 3 for each Morningstar device you want to monitor.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_mppt_snmp

Morningstar ProStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-MPPT Array Voltage Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Array: Sweep Vmp	MIB: PROSTAR-MPPT Array Vmp Description:Array Max. Power Point Voltage Scaling Factor:1.0 Units:V Range:[0.0, 5000.0] Modbus address:0x003D	SNMP agent	array.sweep_vmp[arrayVmp.0]
Array: Sweep Voc	MIB: PROSTAR-MPPT Array Voc Description:Array Open Circuit Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x003F	SNMP agent	array.sweep_voc[arrayVoc.0]
Array: Sweep Pmax	MIB: PROSTAR-MPPT Array Max. Power (sweep) Description:Array Max. Power (last sweep) Scaling Factor:1.0 Units:W Range:[0.0, 500] Modbus address:0x003E	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0]
Battery: Charge State	MIB: PROSTAR-MPPT Charge State Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-MPPT Target Voltage Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-MPPT Charge Current Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0010	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-MPPT Load State Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-MPPT Load Voltage Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-MPPT Load Current Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-MPPT Ambient Temperature Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-MPPT Battery Temperature Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-MPPT Heatsink Temperature Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-MPPT Ah Charge (Resettable) Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-MPPT kWh Charge (Resettable) Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-MPPT Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-MPPT Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar ProStar MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar ProStar MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar ProStar MPPT: Battery: Device charge in warning state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Device charge in critical state
Morningstar ProStar MPPT: Battery: Device charge in critical state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar ProStar MPPT: Load: Device load in warning state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar ProStar MPPT: Load: Device load in critical state
Morningstar ProStar MPPT: Load: Device load in critical state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar ProStar MPPT: Temperature: Low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Temperature: Critically low battery temperature
Morningstar ProStar MPPT: Temperature: Critically low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar ProStar MPPT: Temperature: High battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Temperature: Critically high battery temperature
Morningstar ProStar MPPT: Temperature: Critically high battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar ProStar MPPT: Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar MPPT: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "software" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Morningstar ProStar MPPT: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar ProStar MPPT: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar ProStar MPPT: Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Morningstar ProStar MPPT: Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Morningstar ProStar MPPT: Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar MPPT: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar ProStar MPPT: Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar MPPT: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "software" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar ProStar MPPT: Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar ProStar MPPT: Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar MPPT: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "tb5v" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","tb5v")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name	Description	Type	Key and additional info
Battery: Voltage{#SINGLETON}	MIB: PROSTAR-MPPT Battery Terminal Voltage Description:Battery Terminal Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0012	SNMP agent	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-MPPT

Battery Terminal Voltage

Description:Battery Terminal Voltage

Scaling Factor:1.0

Units:V

Range:[0.0, 80.0]

Modbus address:0x0012

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar ProStar MPPT: Battery: Low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Critically low battery voltage
Morningstar ProStar MPPT: Battery: Critically low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar ProStar MPPT: Battery: High battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Critically high battery voltage
Morningstar ProStar MPPT: Battery: Critically high battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_mppt_snmp

Morningstar ProStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-MPPT Array Voltage Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Array: Sweep Vmp	MIB: PROSTAR-MPPT Array Vmp Description:Array Max. Power Point Voltage Scaling Factor:1.0 Units:V Range:[0.0, 5000.0] Modbus address:0x003D	SNMP agent	array.sweep_vmp[arrayVmp.0]
Array: Sweep Voc	MIB: PROSTAR-MPPT Array Voc Description:Array Open Circuit Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x003F	SNMP agent	array.sweep_voc[arrayVoc.0]
Array: Sweep Pmax	MIB: PROSTAR-MPPT Array Max. Power (sweep) Description:Array Max. Power (last sweep) Scaling Factor:1.0 Units:W Range:[0.0, 500] Modbus address:0x003E	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0]
Battery: Charge State	MIB: PROSTAR-MPPT Charge State Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-MPPT Target Voltage Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-MPPT Charge Current Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0010	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-MPPT Load State Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-MPPT Load Voltage Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-MPPT Load Current Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-MPPT Ambient Temperature Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-MPPT Battery Temperature Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-MPPT Heatsink Temperature Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-MPPT Ah Charge (Resettable) Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-MPPT kWh Charge (Resettable) Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-MPPT Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-MPPT Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar ProStar MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar ProStar MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar ProStar MPPT: Battery: Device charge in warning state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Device charge in critical state
Morningstar ProStar MPPT: Battery: Device charge in critical state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar ProStar MPPT: Load: Device load in warning state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar ProStar MPPT: Load: Device load in critical state
Morningstar ProStar MPPT: Load: Device load in critical state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar ProStar MPPT: Temperature: Low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Temperature: Critically low battery temperature
Morningstar ProStar MPPT: Temperature: Critically low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar ProStar MPPT: Temperature: High battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Temperature: Critically high battery temperature
Morningstar ProStar MPPT: Temperature: Critically high battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar ProStar MPPT: Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar MPPT: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "software" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Morningstar ProStar MPPT: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar ProStar MPPT: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar ProStar MPPT: Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Morningstar ProStar MPPT: Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Morningstar ProStar MPPT: Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar MPPT: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar ProStar MPPT: Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar MPPT: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "software" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar ProStar MPPT: Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar ProStar MPPT: Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar MPPT: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "tb5v" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","tb5v")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name	Description	Type	Key and additional info
Battery: Voltage{#SINGLETON}	MIB: PROSTAR-MPPT Battery Terminal Voltage Description:Battery Terminal Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0012	SNMP agent	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-MPPT

Battery Terminal Voltage

Description:Battery Terminal Voltage

Scaling Factor:1.0

Units:V

Range:[0.0, 80.0]

Modbus address:0x0012

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar ProStar MPPT: Battery: Low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Critically low battery voltage
Morningstar ProStar MPPT: Battery: Critically low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar ProStar MPPT: Battery: High battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Critically high battery voltage
Morningstar ProStar MPPT: Battery: Critically high battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_mppt_snmp

Morningstar ProStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-MPPT Array Voltage Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Array: Sweep Vmp	MIB: PROSTAR-MPPT Array Vmp Description:Array Max. Power Point Voltage Scaling Factor:1.0 Units:V Range:[0.0, 5000.0] Modbus address:0x003D	SNMP agent	array.sweep_vmp[arrayVmp.0]
Array: Sweep Voc	MIB: PROSTAR-MPPT Array Voc Description:Array Open Circuit Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x003F	SNMP agent	array.sweep_voc[arrayVoc.0]
Array: Sweep Pmax	MIB: PROSTAR-MPPT Array Max. Power (sweep) Description:Array Max. Power (last sweep) Scaling Factor:1.0 Units:W Range:[0.0, 500] Modbus address:0x003E	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0]
Battery: Charge State	MIB: PROSTAR-MPPT Charge State Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-MPPT Target Voltage Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-MPPT Charge Current Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0010	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-MPPT Load State Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-MPPT Load Voltage Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-MPPT Load Current Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-MPPT Ambient Temperature Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-MPPT Battery Temperature Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-MPPT Heatsink Temperature Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-MPPT Ah Charge (Resettable) Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-MPPT kWh Charge (Resettable) Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-MPPT Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-MPPT Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar ProStar MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar ProStar MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar ProStar MPPT: Battery: Device charge in warning state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Device charge in critical state
Morningstar ProStar MPPT: Battery: Device charge in critical state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar ProStar MPPT: Load: Device load in warning state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar ProStar MPPT: Load: Device load in critical state
Morningstar ProStar MPPT: Load: Device load in critical state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar ProStar MPPT: Temperature: Low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Temperature: Critically low battery temperature
Morningstar ProStar MPPT: Temperature: Critically low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar ProStar MPPT: Temperature: High battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Temperature: Critically high battery temperature
Morningstar ProStar MPPT: Temperature: Critically high battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar ProStar MPPT: Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar MPPT: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "software" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Morningstar ProStar MPPT: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar ProStar MPPT: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar ProStar MPPT: Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Morningstar ProStar MPPT: Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Morningstar ProStar MPPT: Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar MPPT: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar ProStar MPPT: Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar MPPT: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar ProStar MPPT: Status: Device has "software" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar ProStar MPPT: Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar ProStar MPPT: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar ProStar MPPT: Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar MPPT: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorShorted")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "inductorTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "tb5v" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","tb5v")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Morningstar ProStar MPPT: Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name	Description	Type	Key and additional info
Battery: Voltage{#SINGLETON}	MIB: PROSTAR-MPPT Battery Terminal Voltage Description:Battery Terminal Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0012	SNMP agent	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-MPPT

Battery Terminal Voltage

Description:Battery Terminal Voltage

Scaling Factor:1.0

Units:V

Range:[0.0, 80.0]

Modbus address:0x0012

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar ProStar MPPT: Battery: Low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Critically low battery voltage
Morningstar ProStar MPPT: Battery: Critically low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar ProStar MPPT: Battery: High battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar ProStar MPPT: Battery: Critically high battery voltage
Morningstar ProStar MPPT: Battery: Critically high battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_mppt_snmp

Morningstar ProStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-MPPT Array Voltage Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Array: Sweep Vmp	MIB: PROSTAR-MPPT Array Vmp Description:Array Max. Power Point Voltage Scaling Factor:1.0 Units:V Range:[0.0, 5000.0] Modbus address:0x003D	SNMP agent	array.sweep_vmp[arrayVmp.0]
Array: Sweep Voc	MIB: PROSTAR-MPPT Array Voc Description:Array Open Circuit Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x003F	SNMP agent	array.sweep_voc[arrayVoc.0]
Array: Sweep Pmax	MIB: PROSTAR-MPPT Array Max. Power (sweep) Description:Array Max. Power (last sweep) Scaling Factor:1.0 Units:W Range:[0.0, 500] Modbus address:0x003E	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0]
Battery: Charge State	MIB: PROSTAR-MPPT Charge State Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-MPPT Target Voltage Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-MPPT Charge Current Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0010	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-MPPT Load State Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-MPPT Load Voltage Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-MPPT Load Current Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-MPPT Ambient Temperature Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-MPPT Battery Temperature Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-MPPT Heatsink Temperature Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-MPPT Ah Charge (Resettable) Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-MPPT kWh Charge (Resettable) Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-MPPT Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-MPPT Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Load: Device load in warning state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Temperature: Low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "software" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Status: Device has "software" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Status: Device has "inductorTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorOpen")=2`	Warning
Status: Device has "inductorTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorShorted")=2`	Warning
Status: Device has "inductorTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "tb5v" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","tb5v")=2`	Warning
Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name	Description	Type	Key and additional info
Battery: Voltage{#SINGLETON}	MIB: PROSTAR-MPPT Battery Terminal Voltage Description:Battery Terminal Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0012	SNMP agent	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-MPPT

Battery Terminal Voltage

Description:Battery Terminal Voltage

Scaling Factor:1.0

Units:V

Range:[0.0, 80.0]

Modbus address:0x0012

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_mppt_snmp

Morningstar ProStar MPPT by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

DEPENDENT

battery.voltage.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group	Name	Description	Type	Key and additional info
Array	Array: Voltage	MIB: PROSTAR-MPPT Array Voltage Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP	array.voltage[arrayVoltage.0]
Array	Array: Sweep Vmp	MIB: PROSTAR-MPPT Array Vmp Description:Array Max. Power Point Voltage Scaling Factor:1.0 Units:V Range:[0.0, 5000.0] Modbus address:0x003D	SNMP	array.sweep_vmp[arrayVmp.0]
Array	Array: Sweep Voc	MIB: PROSTAR-MPPT Array Voc Description:Array Open Circuit Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x003F	SNMP	array.sweep_voc[arrayVoc.0]
Array	Array: Sweep Pmax	MIB: PROSTAR-MPPT Array Max. Power (sweep) Description:Array Max. Power (last sweep) Scaling Factor:1.0 Units:W Range:[0.0, 500] Modbus address:0x003E	SNMP	array.sweep_pmax[arrayMaxPowerSweep.0]
Battery	Battery: Charge State	MIB: PROSTAR-MPPT Charge State Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP	charge.state[chargeState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Target Voltage	MIB: PROSTAR-MPPT Target Voltage Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP	target.voltage[targetVoltage.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Charge Current	MIB: PROSTAR-MPPT Charge Current Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0010	SNMP	charge.current[chargeCurrent.0]
Battery	Battery: Voltage{#SINGLETON}	MIB: PROSTAR-MPPT Battery Terminal Voltage Description:Battery Terminal Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0012	SNMP	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]
Counter	Counter: Charge Amp-hours	MIB: PROSTAR-MPPT Ah Charge (Resettable) Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Counter	Counter: Charge KW-hours	MIB: PROSTAR-MPPT kWh Charge (Resettable) Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP	counter.charge_kw_hours[kwhChargeResettable.0]
Counter	Counter: Load Amp-hours	MIB: PROSTAR-MPPT Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP	counter.load_amp_hours[ahLoadResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Load	Load: State	MIB: PROSTAR-MPPT Load State Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP	load.state[loadState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Load	Load: Voltage	MIB: PROSTAR-MPPT Load Voltage Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP	load.voltage[loadVoltage.0]
Load	Load: Current	MIB: PROSTAR-MPPT Load Current Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP	load.current[loadCurrent.0]
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Array Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP	status.array_faults[arrayFaults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Load Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP	status.load_faults[loadFaults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: PROSTAR-MPPT Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Ambient	MIB: PROSTAR-MPPT Ambient Temperature Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP	temp.ambient[ambientTemperature.0]
Temperature	Temperature: Battery	MIB: PROSTAR-MPPT Battery Temperature Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP	temp.battery[batteryTemperature.0]
Temperature	Temperature: Heatsink	MIB: PROSTAR-MPPT Heatsink Temperature Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: PROSTAR-MPPT	SNMP	battery.voltage.discovery[batteryTerminalVoltage.0]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state	-	`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	WARNING	Depends on: - Battery: Device charge in critical state
Battery: Device charge in critical state	-	`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	HIGH
Battery: Low battery voltage	-	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Load: Device load in warning state	-	`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	WARNING	Depends on: - Load: Device load in critical state
Load: Device load in critical state	-	`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar MPPT by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar MPPT by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "overcurrent" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetSShorted" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	HIGH
Status: Device has "software" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	HIGH
Status: Device has "batteryHvd" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	HIGH
Status: Device has "arrayHvd" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	HIGH
Status: Device has "customSettingsEdit" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "rtsShorted" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	HIGH
Status: Device has "rtsNoLongerValid" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	HIGH
Status: Device has "localTempSensorDamaged" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	HIGH
Status: Device has "batteryLowVoltageDisconnect" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	HIGH
Status: Device has "slaveTimeout" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	HIGH
Status: Device has "dipSwitchChanged" array faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	HIGH
Status: Device has "externalShortCircuit" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	HIGH
Status: Device has "overcurrent" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetShorted" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	HIGH
Status: Device has "software" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	HIGH
Status: Device has "loadHvd" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	HIGH
Status: Device has "highTempDisconnect" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	HIGH
Status: Device has "dipSwitchChanged" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	HIGH
Status: Device has "customSettingsEdit" load faults flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "rtsShorted" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	WARNING
Status: Device has "rtsDisconnected" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	WARNING
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShorted" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	WARNING
Status: Device has "heatsinkTempLimit" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	WARNING
Status: Device has "inductorTempSensorOpen" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorOpen")=2`	WARNING
Status: Device has "inductorTempSensorShorted" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorShorted")=2`	WARNING
Status: Device has "inductorTempLimit" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempLimit")=2`	WARNING
Status: Device has "currentLimit" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	WARNING
Status: Device has "currentMeasurementError" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	WARNING
Status: Device has "batterySenseOutOfRange" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	WARNING
Status: Device has "batterySenseDisconnected" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	WARNING
Status: Device has "uncalibrated" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	WARNING
Status: Device has "tb5v" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","tb5v")=2`	WARNING
Status: Device has "fp10SupplyOutOfRange" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	WARNING
Status: Device has "mosfetOpen" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	WARNING
Status: Device has "arrayCurrentOffset" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	WARNING
Status: Device has "loadCurrentOffset" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	WARNING
Status: Device has "p33SupplyOutOfRange" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	WARNING
Status: Device has "p12SupplyOutOfRange" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	WARNING
Status: Device has "hightInputVoltageLimit" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	WARNING
Status: Device has "controllerReset" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	WARNING
Status: Device has "loadLvd" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	WARNING
Status: Device has "logTimeout" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	WARNING
Status: Device has "eepromAccessFailure" alarm flag	-	`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	WARNING
Temperature: Low battery temperature	-	`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	WARNING	Depends on: - Temperature: Critically low battery temperature
Temperature: Critically low battery temperature	-	`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	HIGH
Temperature: High battery temperature	-	`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	WARNING	Depends on: - Temperature: Critically high battery temperature
Temperature: Critically high battery temperature	-	`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	HIGH

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_mppt_snmp

Morningstar ProStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-MPPT Array Voltage Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Array: Sweep Vmp	MIB: PROSTAR-MPPT Array Vmp Description:Array Max. Power Point Voltage Scaling Factor:1.0 Units:V Range:[0.0, 5000.0] Modbus address:0x003D	SNMP agent	array.sweep_vmp[arrayVmp.0]
Array: Sweep Voc	MIB: PROSTAR-MPPT Array Voc Description:Array Open Circuit Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x003F	SNMP agent	array.sweep_voc[arrayVoc.0]
Array: Sweep Pmax	MIB: PROSTAR-MPPT Array Max. Power (sweep) Description:Array Max. Power (last sweep) Scaling Factor:1.0 Units:W Range:[0.0, 500] Modbus address:0x003E	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0]
Battery: Charge State	MIB: PROSTAR-MPPT Charge State Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-MPPT Target Voltage Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-MPPT Charge Current Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0010	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-MPPT Load State Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-MPPT Load Voltage Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-MPPT Load Current Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-MPPT Ambient Temperature Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-MPPT Battery Temperature Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-MPPT Heatsink Temperature Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-MPPT Ah Charge (Resettable) Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-MPPT kWh Charge (Resettable) Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-MPPT Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-MPPT Description:Array Faults Modbus address:0x0022	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-MPPT Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar ProStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Load: Device load in warning state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Temperature: Low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar ProStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "software" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Status: Device has "software" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Status: Device has "inductorTempSensorOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorOpen")=2`	Warning
Status: Device has "inductorTempSensorShorted" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempSensorShorted")=2`	Warning
Status: Device has "inductorTempLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","inductorTempLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "tb5v" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","tb5v")=2`	Warning
Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name	Description	Type	Key and additional info
Battery: Voltage{#SINGLETON}	MIB: PROSTAR-MPPT Battery Terminal Voltage Description:Battery Terminal Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0012	SNMP agent	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-MPPT

Battery Terminal Voltage

Description:Battery Terminal Voltage

Scaling Factor:1.0

Units:V

Range:[0.0, 80.0]

Modbus address:0x0012

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar ProStar MPPT by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_pwm_snmp

Morningstar ProStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-PWM Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Battery: Charge State	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Bulk 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-PWM	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-PWM Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-PWM Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0011	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-PWM Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-PWM Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-PWM Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-PWM Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-PWM Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-PWM Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-PWM Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-PWM Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-PWM Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-PWM Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-PWM Description:Load Faults Modbus address:0x002F	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-PWM Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar ProStar PWM: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar ProStar PWM: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar ProStar PWM: Battery: Device charge in warning state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Device charge in critical state
Morningstar ProStar PWM: Battery: Device charge in critical state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar ProStar PWM: Load: Device load in warning state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar ProStar PWM: Load: Device load in critical state
Morningstar ProStar PWM: Load: Device load in critical state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar ProStar PWM: Temperature: Low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Temperature: Critically low battery temperature
Morningstar ProStar PWM: Temperature: Critically low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar ProStar PWM: Temperature: High battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Temperature: Critically high battery temperature
Morningstar ProStar PWM: Temperature: Critically high battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar ProStar PWM: Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar PWM: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "software" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Morningstar ProStar PWM: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar ProStar PWM: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar ProStar PWM: Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Morningstar ProStar PWM: Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Morningstar ProStar PWM: Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar PWM: Status: Device has "p3Fault" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","p3Fault")=2`	High
Morningstar ProStar PWM: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar ProStar PWM: Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar PWM: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "software" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar ProStar PWM: Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar ProStar PWM: Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar PWM: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar PWM: Status: Device has "p3Fault" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","p3Fault")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar ProStar PWM: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar ProStar PWM: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batteryTempOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batteryTempOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Morningstar ProStar PWM: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Morningstar ProStar PWM: Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Morningstar ProStar PWM: Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name	Description	Type	Key and additional info
Battery: Voltage{#SINGLETON}	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021	SNMP agent	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-PWM

Description:Control State

Modbus address:0x0021

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar ProStar PWM: Battery: Low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Critically low battery voltage
Morningstar ProStar PWM: Battery: Critically low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar ProStar PWM: Battery: High battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Critically high battery voltage
Morningstar ProStar PWM: Battery: Critically high battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_pwm_snmp

Morningstar ProStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-PWM Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Battery: Charge State	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Bulk 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-PWM	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-PWM Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-PWM Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0011	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-PWM Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-PWM Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-PWM Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-PWM Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-PWM Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-PWM Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-PWM Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-PWM Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-PWM Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-PWM Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-PWM Description:Load Faults Modbus address:0x002F	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-PWM Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar ProStar PWM: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar ProStar PWM: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar ProStar PWM: Battery: Device charge in warning state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Device charge in critical state
Morningstar ProStar PWM: Battery: Device charge in critical state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar ProStar PWM: Load: Device load in warning state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar ProStar PWM: Load: Device load in critical state
Morningstar ProStar PWM: Load: Device load in critical state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar ProStar PWM: Temperature: Low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Temperature: Critically low battery temperature
Morningstar ProStar PWM: Temperature: Critically low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar ProStar PWM: Temperature: High battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Temperature: Critically high battery temperature
Morningstar ProStar PWM: Temperature: Critically high battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar ProStar PWM: Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar PWM: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "software" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Morningstar ProStar PWM: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar ProStar PWM: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar ProStar PWM: Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Morningstar ProStar PWM: Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Morningstar ProStar PWM: Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar PWM: Status: Device has "p3Fault" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","p3Fault")=2`	High
Morningstar ProStar PWM: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar ProStar PWM: Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar PWM: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "software" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar ProStar PWM: Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar ProStar PWM: Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar PWM: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar PWM: Status: Device has "p3Fault" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","p3Fault")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar ProStar PWM: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar ProStar PWM: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batteryTempOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batteryTempOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Morningstar ProStar PWM: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Morningstar ProStar PWM: Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Morningstar ProStar PWM: Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	Dependent item	battery.voltage.discovery Preprocessing JavaScript: `The text is too long. Please see the template.`

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-PWM

Description:Control State

Modbus address:0x0021

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar ProStar PWM: Battery: Low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Critically low battery voltage
Morningstar ProStar PWM: Battery: Critically low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar ProStar PWM: Battery: High battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Critically high battery voltage
Morningstar ProStar PWM: Battery: Critically high battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_pwm_snmp

Morningstar ProStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-PWM Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Battery: Charge State	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Bulk 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-PWM	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-PWM Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-PWM Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0011	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-PWM Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-PWM Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-PWM Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-PWM Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-PWM Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-PWM Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-PWM Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-PWM Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-PWM Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-PWM Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-PWM Description:Load Faults Modbus address:0x002F	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-PWM Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar ProStar PWM: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar ProStar PWM: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar ProStar PWM: Battery: Device charge in warning state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Device charge in critical state
Morningstar ProStar PWM: Battery: Device charge in critical state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar ProStar PWM: Load: Device load in warning state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar ProStar PWM: Load: Device load in critical state
Morningstar ProStar PWM: Load: Device load in critical state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar ProStar PWM: Temperature: Low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Temperature: Critically low battery temperature
Morningstar ProStar PWM: Temperature: Critically low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar ProStar PWM: Temperature: High battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Temperature: Critically high battery temperature
Morningstar ProStar PWM: Temperature: Critically high battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar ProStar PWM: Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar PWM: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "software" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Morningstar ProStar PWM: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar ProStar PWM: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar ProStar PWM: Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Morningstar ProStar PWM: Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Morningstar ProStar PWM: Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar PWM: Status: Device has "p3Fault" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","p3Fault")=2`	High
Morningstar ProStar PWM: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar ProStar PWM: Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar ProStar PWM: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar ProStar PWM: Status: Device has "software" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar ProStar PWM: Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar ProStar PWM: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar ProStar PWM: Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar ProStar PWM: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar ProStar PWM: Status: Device has "p3Fault" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","p3Fault")=2`	High
Morningstar ProStar PWM: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar ProStar PWM: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar ProStar PWM: Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar ProStar PWM: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar ProStar PWM: Status: Device has "batteryTempOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batteryTempOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Morningstar ProStar PWM: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Morningstar ProStar PWM: Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Morningstar ProStar PWM: Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Morningstar ProStar PWM: Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Morningstar ProStar PWM: Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Morningstar ProStar PWM: Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-PWM

Description:Control State

Modbus address:0x0021

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar ProStar PWM: Battery: Low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Critically low battery voltage
Morningstar ProStar PWM: Battery: Critically low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar ProStar PWM: Battery: High battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar ProStar PWM: Battery: Critically high battery voltage
Morningstar ProStar PWM: Battery: Critically high battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_pwm_snmp

Morningstar ProStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-PWM Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Battery: Charge State	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Bulk 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-PWM	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-PWM Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-PWM Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0011	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-PWM Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-PWM Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-PWM Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-PWM Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-PWM Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-PWM Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-PWM Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-PWM Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-PWM Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-PWM Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-PWM Description:Load Faults Modbus address:0x002F	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-PWM Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Load: Device load in warning state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Temperature: Low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "software" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "p3Fault" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","p3Fault")=2`	High
Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Status: Device has "software" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "p3Fault" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","p3Fault")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "batteryTempOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batteryTempOutOfRange")=2`	Warning
Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-PWM

Description:Control State

Modbus address:0x0021

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_pwm_snmp

Morningstar ProStar PWM by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

DEPENDENT

battery.voltage.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group	Name	Description	Type	Key and additional info
Array	Array: Voltage	MIB: PROSTAR-PWM Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP	array.voltage[arrayVoltage.0]
Battery	Battery: Charge State	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Bulk 6: Pwm 7: Float 8: Equalize	SNMP	charge.state[chargeState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Target Voltage	MIB: PROSTAR-PWM Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP	target.voltage[targetVoltage.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Charge Current	MIB: PROSTAR-PWM Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0011	SNMP	charge.current[chargeCurrent.0]
Battery	Battery: Voltage{#SINGLETON}	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021	SNMP	battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]
Counter	Counter: Charge Amp-hours	MIB: PROSTAR-PWM Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Counter	Counter: Charge KW-hours	MIB: PROSTAR-PWM Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP	counter.charge_kw_hours[kwhChargeResettable.0]
Counter	Counter: Load Amp-hours	MIB: PROSTAR-PWM Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP	counter.load_amp_hours[ahLoadResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Load	Load: State	MIB: PROSTAR-PWM Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP	load.state[loadState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Load	Load: Voltage	MIB: PROSTAR-PWM Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP	load.voltage[loadVoltage.0]
Load	Load: Current	MIB: PROSTAR-PWM Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP	load.current[loadCurrent.0]
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Array Faults	MIB: PROSTAR-PWM Description:Array Faults Modbus address:0x0022	SNMP	status.array_faults[arrayFaults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Load Faults	MIB: PROSTAR-PWM Description:Load Faults Modbus address:0x002F	SNMP	status.load_faults[loadFaults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: PROSTAR-PWM Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Ambient	MIB: PROSTAR-PWM Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP	temp.ambient[ambientTemperature.0]
Temperature	Temperature: Battery	MIB: PROSTAR-PWM Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP	temp.battery[batteryTemperature.0]
Temperature	Temperature: Heatsink	MIB: PROSTAR-PWM Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: PROSTAR-PWM	SNMP	battery.voltage.discovery[batteryTerminalVoltage.0]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state	-	`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	WARNING	Depends on: - Battery: Device charge in critical state
Battery: Device charge in critical state	-	`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	HIGH
Battery: Low battery voltage	-	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Load: Device load in warning state	-	`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	WARNING	Depends on: - Load: Device load in critical state
Load: Device load in critical state	-	`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar PWM by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar PWM by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "overcurrent" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetSShorted" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	HIGH
Status: Device has "software" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	HIGH
Status: Device has "batteryHvd" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	HIGH
Status: Device has "arrayHvd" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	HIGH
Status: Device has "customSettingsEdit" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "rtsShorted" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	HIGH
Status: Device has "rtsNoLongerValid" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	HIGH
Status: Device has "localTempSensorDamaged" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	HIGH
Status: Device has "batteryLowVoltageDisconnect" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	HIGH
Status: Device has "slaveTimeout" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	HIGH
Status: Device has "dipSwitchChanged" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	HIGH
Status: Device has "p3Fault" array faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","p3Fault")=2`	HIGH
Status: Device has "externalShortCircuit" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	HIGH
Status: Device has "overcurrent" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetShorted" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	HIGH
Status: Device has "software" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	HIGH
Status: Device has "loadHvd" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	HIGH
Status: Device has "highTempDisconnect" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	HIGH
Status: Device has "dipSwitchChanged" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	HIGH
Status: Device has "customSettingsEdit" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "p3Fault" load faults flag	-	`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","p3Fault")=2`	HIGH
Status: Device has "rtsShorted" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	WARNING
Status: Device has "rtsDisconnected" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	WARNING
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShorted" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	WARNING
Status: Device has "heatsinkTempLimit" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	WARNING
Status: Device has "currentLimit" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	WARNING
Status: Device has "currentMeasurementError" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	WARNING
Status: Device has "batterySenseOutOfRange" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	WARNING
Status: Device has "batterySenseDisconnected" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	WARNING
Status: Device has "uncalibrated" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	WARNING
Status: Device has "batteryTempOutOfRange" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batteryTempOutOfRange")=2`	WARNING
Status: Device has "fp10SupplyOutOfRange" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	WARNING
Status: Device has "mosfetOpen" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	WARNING
Status: Device has "arrayCurrentOffset" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	WARNING
Status: Device has "loadCurrentOffset" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	WARNING
Status: Device has "p33SupplyOutOfRange" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	WARNING
Status: Device has "p12SupplyOutOfRange" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	WARNING
Status: Device has "hightInputVoltageLimit" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	WARNING
Status: Device has "controllerReset" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	WARNING
Status: Device has "loadLvd" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	WARNING
Status: Device has "logTimeout" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	WARNING
Status: Device has "eepromAccessFailure" alarm flag	-	`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	WARNING
Temperature: Low battery temperature	-	`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	WARNING	Depends on: - Temperature: Critically low battery temperature
Temperature: Critically low battery temperature	-	`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	HIGH
Temperature: High battery temperature	-	`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	WARNING	Depends on: - Temperature: Critically high battery temperature
Temperature: Critically high battery temperature	-	`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	HIGH

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_prostar_pwm_snmp

Morningstar ProStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar ProStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar ProStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: PROSTAR-PWM Description:Array Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0013	SNMP agent	array.voltage[arrayVoltage.0]
Battery: Charge State	MIB: PROSTAR-PWM Description:Control State Modbus address:0x0021 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Bulk 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: PROSTAR-PWM	SNMP agent	battery.voltage.discovery[batteryTerminalVoltage.0]
Battery: Target Voltage	MIB: PROSTAR-PWM Description:Target Regulation Voltage Scaling Factor:1.0 Units:V Range:[0.0, 80.0] Modbus address:0x0024	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: PROSTAR-PWM Description:Charge Current Scaling Factor:1.0 Units:A Range:[0, 40] Modbus address:0x0011	SNMP agent	charge.current[chargeCurrent.0]
Load: State	MIB: PROSTAR-PWM Description:Load State Modbus address:0x002E 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: PROSTAR-PWM Description:Load Voltage Scaling Factor:1.0 Units:V Range:[0, 80] Modbus address:0x0014	SNMP agent	load.voltage[loadVoltage.0]
Load: Current	MIB: PROSTAR-PWM Description:Load Current Scaling Factor:1.0 Units:A Range:[0, 60] Modbus address:0x0016	SNMP agent	load.current[loadCurrent.0]
Temperature: Ambient	MIB: PROSTAR-PWM Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001C	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: PROSTAR-PWM Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001B	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: PROSTAR-PWM Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x001A	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: PROSTAR-PWM Description:Ah Charge (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0026 L=0x0027	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: PROSTAR-PWM Description:Kilowatt Hours Charge (Resettable) Scaling Factor:1.0 Units:kWh Range:[0.0, 65535] Modbus address:0x002A	SNMP agent	counter.charge_kw_hours[kwhChargeResettable.0]
Counter: Load Amp-hours	MIB: PROSTAR-PWM Description:Ah Load (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0032 L=0x0033	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: PROSTAR-PWM Description:Array Faults Modbus address:0x0022	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: PROSTAR-PWM Description:Load Faults Modbus address:0x002F	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: PROSTAR-PWM Description:Alarms Modbus addresses:H=0x0038 L=0x0039	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar ProStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar ProStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar ProStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar ProStar PWM by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Load: Device load in warning state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar ProStar PWM by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Temperature: Low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar ProStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "software" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","software")=2`	High
Status: Device has "batteryHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Status: Device has "batteryLowVoltageDisconnect" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryLowVoltageDisconnect")=2`	High
Status: Device has "slaveTimeout" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","slaveTimeout")=2`	High
Status: Device has "dipSwitchChanged" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "p3Fault" array faults flag		`count(/Morningstar ProStar PWM by SNMP/status.array_faults[arrayFaults.0],#3,"like","p3Fault")=2`	High
Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Status: Device has "overcurrent" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Status: Device has "software" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Status: Device has "loadHvd" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Status: Device has "dipSwitchChanged" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "p3Fault" load faults flag		`count(/Morningstar ProStar PWM by SNMP/status.load_faults[loadFaults.0],#3,"like","p3Fault")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "heatsinkTempLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentMeasurementError" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentMeasurementError")=2`	Warning
Status: Device has "batterySenseOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseOutOfRange")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "batteryTempOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batteryTempOutOfRange")=2`	Warning
Status: Device has "fp10SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","fp10SupplyOutOfRange")=2`	Warning
Status: Device has "mosfetOpen" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetOpen")=2`	Warning
Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Status: Device has "loadCurrentOffset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadCurrentOffset")=2`	Warning
Status: Device has "p33SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p33SupplyOutOfRange")=2`	Warning
Status: Device has "p12SupplyOutOfRange" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12SupplyOutOfRange")=2`	Warning
Status: Device has "hightInputVoltageLimit" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","hightInputVoltageLimit")=2`	Warning
Status: Device has "controllerReset" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","controllerReset")=2`	Warning
Status: Device has "loadLvd" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadLvd")=2`	Warning
Status: Device has "logTimeout" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","logTimeout")=2`	Warning
Status: Device has "eepromAccessFailure" alarm flag		`count(/Morningstar ProStar PWM by SNMP/status.alarms[alarms.0],#3,"like","eepromAccessFailure")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: PROSTAR-PWM

Description:Control State

Modbus address:0x0021

SNMP agent

battery.voltage[batteryTerminalVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar ProStar PWM by SNMP/battery.voltage[batteryTerminalVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_sunsaver_mppt_snmp

Morningstar SunSaver MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SunSaver MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar SunSaver MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: SUNSAVER-MPPT Description:Array Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x0009	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: SUNSAVER-MPPT Description:Array Max. Power Point Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 5000.0] Modbus address:0x0028	SNMP agent	array.sweep_vmp[arrayVmp.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_voc[arrayVoc.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0] Preprocessing Custom multiplier: `0.01509857178` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: SUNSAVER-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.003051757813`
Battery: Target Voltage	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	charge.current[chargeCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SUNSAVER-MPPT Description:Load State Modbus address:0x001A 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: SUNSAVER-MPPT Description:Load Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x000A	SNMP agent	load.voltage[loadVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: Current	MIB: SUNSAVER-MPPT Description:Load Current Scaling Factor:0.002415771484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP agent	load.current[loadCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Ambient	MIB: SUNSAVER-MPPT Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000F	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: SUNSAVER-MPPT Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000D	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: SUNSAVER-MPPT Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Charge(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0015 L=0x0016	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: SUNSAVER-MPPT	SNMP agent	counter.charge_kw_hours[kwhCharge.0]
Counter: Load Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Load(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x001D L=0x001E	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SUNSAVER-MPPT Description:Alarms Modbus addresses:H=0x0023 L=0x0024	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar SunSaver MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar SunSaver MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar SunSaver MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SunSaver MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar SunSaver MPPT: Battery: Device charge in warning state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Device charge in critical state
Morningstar SunSaver MPPT: Battery: Device charge in critical state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar SunSaver MPPT: Load: Device load in warning state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar SunSaver MPPT: Load: Device load in critical state
Morningstar SunSaver MPPT: Load: Device load in critical state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar SunSaver MPPT: Temperature: Low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Temperature: Critically low battery temperature
Morningstar SunSaver MPPT: Temperature: Critically low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar SunSaver MPPT: Temperature: High battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Temperature: Critically high battery temperature
Morningstar SunSaver MPPT: Temperature: Critically high battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar SunSaver MPPT: Status: Device has "overcurrent" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar SunSaver MPPT: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "softwareFault" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","softwareFault")=2`	High
Morningstar SunSaver MPPT: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar SunSaver MPPT: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar SunSaver MPPT: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "overcurrent" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar SunSaver MPPT: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "software" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar SunSaver MPPT: Status: Device has "loadHvd" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar SunSaver MPPT: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "unknownLoadFault" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","unknownLoadFault")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "sspptHot" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","sspptHot")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "currentOffset" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "highVaCurrentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVaCurrentLimit")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SUNSAVER-MPPT

Description:Control State

Modbus address:0x0011

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.003051757813
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar SunSaver MPPT: Battery: Low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Critically low battery voltage
Morningstar SunSaver MPPT: Battery: Critically low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar SunSaver MPPT: Battery: High battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Critically high battery voltage
Morningstar SunSaver MPPT: Battery: Critically high battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_sunsaver_mppt_snmp

Morningstar SunSaver MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SunSaver MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar SunSaver MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: SUNSAVER-MPPT Description:Array Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x0009	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: SUNSAVER-MPPT Description:Array Max. Power Point Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 5000.0] Modbus address:0x0028	SNMP agent	array.sweep_vmp[arrayVmp.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_voc[arrayVoc.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0] Preprocessing Custom multiplier: `0.01509857178` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: SUNSAVER-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.003051757813`
Battery: Target Voltage	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	charge.current[chargeCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SUNSAVER-MPPT Description:Load State Modbus address:0x001A 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: SUNSAVER-MPPT Description:Load Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x000A	SNMP agent	load.voltage[loadVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: Current	MIB: SUNSAVER-MPPT Description:Load Current Scaling Factor:0.002415771484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP agent	load.current[loadCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Ambient	MIB: SUNSAVER-MPPT Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000F	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: SUNSAVER-MPPT Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000D	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: SUNSAVER-MPPT Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Charge(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0015 L=0x0016	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: SUNSAVER-MPPT	SNMP agent	counter.charge_kw_hours[kwhCharge.0]
Counter: Load Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Load(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x001D L=0x001E	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SUNSAVER-MPPT Description:Alarms Modbus addresses:H=0x0023 L=0x0024	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar SunSaver MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar SunSaver MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar SunSaver MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SunSaver MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar SunSaver MPPT: Battery: Device charge in warning state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Device charge in critical state
Morningstar SunSaver MPPT: Battery: Device charge in critical state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar SunSaver MPPT: Load: Device load in warning state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar SunSaver MPPT: Load: Device load in critical state
Morningstar SunSaver MPPT: Load: Device load in critical state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar SunSaver MPPT: Temperature: Low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Temperature: Critically low battery temperature
Morningstar SunSaver MPPT: Temperature: Critically low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar SunSaver MPPT: Temperature: High battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Temperature: Critically high battery temperature
Morningstar SunSaver MPPT: Temperature: Critically high battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar SunSaver MPPT: Status: Device has "overcurrent" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar SunSaver MPPT: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "softwareFault" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","softwareFault")=2`	High
Morningstar SunSaver MPPT: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar SunSaver MPPT: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar SunSaver MPPT: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "overcurrent" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar SunSaver MPPT: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "software" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar SunSaver MPPT: Status: Device has "loadHvd" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar SunSaver MPPT: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "unknownLoadFault" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","unknownLoadFault")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "sspptHot" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","sspptHot")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "currentOffset" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "highVaCurrentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVaCurrentLimit")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SUNSAVER-MPPT

Description:Control State

Modbus address:0x0011

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.003051757813
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar SunSaver MPPT: Battery: Low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Critically low battery voltage
Morningstar SunSaver MPPT: Battery: Critically low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar SunSaver MPPT: Battery: High battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Critically high battery voltage
Morningstar SunSaver MPPT: Battery: Critically high battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_sunsaver_mppt_snmp

Morningstar SunSaver MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SunSaver MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar SunSaver MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: SUNSAVER-MPPT Description:Array Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x0009	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: SUNSAVER-MPPT Description:Array Max. Power Point Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 5000.0] Modbus address:0x0028	SNMP agent	array.sweep_vmp[arrayVmp.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_voc[arrayVoc.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0] Preprocessing Custom multiplier: `0.01509857178` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: SUNSAVER-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.003051757813`
Battery: Target Voltage	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	charge.current[chargeCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SUNSAVER-MPPT Description:Load State Modbus address:0x001A 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: SUNSAVER-MPPT Description:Load Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x000A	SNMP agent	load.voltage[loadVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: Current	MIB: SUNSAVER-MPPT Description:Load Current Scaling Factor:0.002415771484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP agent	load.current[loadCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Ambient	MIB: SUNSAVER-MPPT Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000F	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: SUNSAVER-MPPT Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000D	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: SUNSAVER-MPPT Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Charge(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0015 L=0x0016	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: SUNSAVER-MPPT	SNMP agent	counter.charge_kw_hours[kwhCharge.0]
Counter: Load Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Load(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x001D L=0x001E	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SUNSAVER-MPPT Description:Alarms Modbus addresses:H=0x0023 L=0x0024	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar SunSaver MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar SunSaver MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar SunSaver MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SunSaver MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar SunSaver MPPT: Battery: Device charge in warning state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Device charge in critical state
Morningstar SunSaver MPPT: Battery: Device charge in critical state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar SunSaver MPPT: Load: Device load in warning state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar SunSaver MPPT: Load: Device load in critical state
Morningstar SunSaver MPPT: Load: Device load in critical state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar SunSaver MPPT: Temperature: Low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Temperature: Critically low battery temperature
Morningstar SunSaver MPPT: Temperature: Critically low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar SunSaver MPPT: Temperature: High battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Temperature: Critically high battery temperature
Morningstar SunSaver MPPT: Temperature: Critically high battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar SunSaver MPPT: Status: Device has "overcurrent" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Morningstar SunSaver MPPT: Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "softwareFault" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","softwareFault")=2`	High
Morningstar SunSaver MPPT: Status: Device has "batteryHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "arrayHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Morningstar SunSaver MPPT: Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Morningstar SunSaver MPPT: Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "overcurrent" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Morningstar SunSaver MPPT: Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Morningstar SunSaver MPPT: Status: Device has "software" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Morningstar SunSaver MPPT: Status: Device has "loadHvd" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Morningstar SunSaver MPPT: Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Morningstar SunSaver MPPT: Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SunSaver MPPT: Status: Device has "unknownLoadFault" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","unknownLoadFault")=2`	High
Morningstar SunSaver MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "sspptHot" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","sspptHot")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "currentOffset" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar SunSaver MPPT: Status: Device has "highVaCurrentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVaCurrentLimit")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SUNSAVER-MPPT

Description:Control State

Modbus address:0x0011

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.003051757813
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar SunSaver MPPT: Battery: Low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Critically low battery voltage
Morningstar SunSaver MPPT: Battery: Critically low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar SunSaver MPPT: Battery: High battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar SunSaver MPPT: Battery: Critically high battery voltage
Morningstar SunSaver MPPT: Battery: Critically high battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_sunsaver_mppt_snmp

Morningstar SunSaver MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SunSaver MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar SunSaver MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: SUNSAVER-MPPT Description:Array Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x0009	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: SUNSAVER-MPPT Description:Array Max. Power Point Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 5000.0] Modbus address:0x0028	SNMP agent	array.sweep_vmp[arrayVmp.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_voc[arrayVoc.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0] Preprocessing Custom multiplier: `0.01509857178` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: SUNSAVER-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.003051757813`
Battery: Target Voltage	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	charge.current[chargeCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SUNSAVER-MPPT Description:Load State Modbus address:0x001A 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: SUNSAVER-MPPT Description:Load Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x000A	SNMP agent	load.voltage[loadVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: Current	MIB: SUNSAVER-MPPT Description:Load Current Scaling Factor:0.002415771484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP agent	load.current[loadCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Ambient	MIB: SUNSAVER-MPPT Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000F	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: SUNSAVER-MPPT Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000D	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: SUNSAVER-MPPT Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Charge(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0015 L=0x0016	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: SUNSAVER-MPPT	SNMP agent	counter.charge_kw_hours[kwhCharge.0]
Counter: Load Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Load(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x001D L=0x001E	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SUNSAVER-MPPT Description:Alarms Modbus addresses:H=0x0023 L=0x0024	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar SunSaver MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SunSaver MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Load: Device load in warning state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Temperature: Low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "softwareFault" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","softwareFault")=2`	High
Status: Device has "batteryHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Status: Device has "overcurrent" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Status: Device has "software" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Status: Device has "loadHvd" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "unknownLoadFault" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","unknownLoadFault")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "sspptHot" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","sspptHot")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Status: Device has "highVaCurrentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVaCurrentLimit")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SUNSAVER-MPPT

Description:Control State

Modbus address:0x0011

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.003051757813
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_sunsaver_mppt_snmp

Morningstar SunSaver MPPT by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

DEPENDENT

battery.voltage.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group	Name	Description	Type	Key and additional info
Array	Array: Voltage	MIB: SUNSAVER-MPPT Description:Array Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x0009	SNMP	array.voltage[arrayVoltage.0] Preprocessing: - MULTIPLIER: `0.003051757813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Sweep Vmp	MIB: SUNSAVER-MPPT Description:Array Max. Power Point Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 5000.0] Modbus address:0x0028	SNMP	array.sweep_vmp[arrayVmp.0] Preprocessing: - MULTIPLIER: `0.003051757813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Sweep Voc	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP	array.sweep_voc[arrayVoc.0] Preprocessing: - MULTIPLIER: `0.003051757813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Sweep Pmax	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP	array.sweep_pmax[arrayMaxPowerSweep.0] Preprocessing: - MULTIPLIER: `0.01509857178` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Charge State	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Pwm 7: Float 8: Equalize	SNMP	charge.state[chargeState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Target Voltage	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP	target.voltage[targetVoltage.0] Preprocessing: - MULTIPLIER: `0.003051757813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Charge Current	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP	charge.current[chargeCurrent.0] Preprocessing: - MULTIPLIER: `0.002415771484` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Voltage{#SINGLETON}	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011	SNMP	battery.voltage[batteryVoltage.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.003051757813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Counter	Counter: Charge Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Charge(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0015 L=0x0016	SNMP	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Counter	Counter: Charge KW-hours	MIB: SUNSAVER-MPPT	SNMP	counter.charge_kw_hours[kwhCharge.0]
Counter	Counter: Load Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Load(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x001D L=0x001E	SNMP	counter.load_amp_hours[ahLoadResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Load	Load: State	MIB: SUNSAVER-MPPT Description:Load State Modbus address:0x001A 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP	load.state[loadState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Load	Load: Voltage	MIB: SUNSAVER-MPPT Description:Load Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x000A	SNMP	load.voltage[loadVoltage.0] Preprocessing: - MULTIPLIER: `0.003051757813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Load	Load: Current	MIB: SUNSAVER-MPPT Description:Load Current Scaling Factor:0.002415771484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP	load.current[loadCurrent.0] Preprocessing: - MULTIPLIER: `0.002415771484` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Array Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP	status.array_faults[arrayFaults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Load Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP	status.load_faults[loadFaults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: SUNSAVER-MPPT Description:Alarms Modbus addresses:H=0x0023 L=0x0024	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Ambient	MIB: SUNSAVER-MPPT Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000F	SNMP	temp.ambient[ambientTemperature.0]
Temperature	Temperature: Battery	MIB: SUNSAVER-MPPT Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000D	SNMP	temp.battery[batteryTemperature.0]
Temperature	Temperature: Heatsink	MIB: SUNSAVER-MPPT Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000E	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: SUNSAVER-MPPT	SNMP	battery.voltage.discovery[batteryVoltage.0] Preprocessing: - MULTIPLIER: `0.003051757813`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state	-	`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	WARNING	Depends on: - Battery: Device charge in critical state
Battery: Device charge in critical state	-	`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	HIGH
Battery: Low battery voltage	-	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Load: Device load in warning state	-	`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	WARNING	Depends on: - Load: Device load in critical state
Load: Device load in critical state	-	`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar SunSaver MPPT by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SunSaver MPPT by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "overcurrent" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetSShorted" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	HIGH
Status: Device has "softwareFault" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","softwareFault")=2`	HIGH
Status: Device has "batteryHvd" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	HIGH
Status: Device has "arrayHvd" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	HIGH
Status: Device has "customSettingsEdit" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "rtsShorted" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	HIGH
Status: Device has "rtsNoLongerValid" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	HIGH
Status: Device has "localTempSensorDamaged" array faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	HIGH
Status: Device has "externalShortCircuit" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	HIGH
Status: Device has "overcurrent" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetShorted" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	HIGH
Status: Device has "software" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	HIGH
Status: Device has "loadHvd" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	HIGH
Status: Device has "highTempDisconnect" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	HIGH
Status: Device has "customSettingsEdit" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "unknownLoadFault" load faults flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","unknownLoadFault")=2`	HIGH
Status: Device has "rtsShorted" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	WARNING
Status: Device has "rtsDisconnected" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	WARNING
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShorted" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	WARNING
Status: Device has "sspptHot" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","sspptHot")=2`	WARNING
Status: Device has "currentLimit" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	WARNING
Status: Device has "currentOffset" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	WARNING
Status: Device has "uncalibrated" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	WARNING
Status: Device has "rtsMiswire" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	WARNING
Status: Device has "systemMiswire" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	WARNING
Status: Device has "mosfetSOpen" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	WARNING
Status: Device has "p12VoltageReferenceOff" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	WARNING
Status: Device has "highVaCurrentLimit" alarm flag	-	`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVaCurrentLimit")=2`	WARNING
Temperature: Low battery temperature	-	`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	WARNING	Depends on: - Temperature: Critically low battery temperature
Temperature: Critically low battery temperature	-	`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	HIGH
Temperature: High battery temperature	-	`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	WARNING	Depends on: - Temperature: Critically high battery temperature
Temperature: Critically high battery temperature	-	`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	HIGH

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_sunsaver_mppt_snmp

Morningstar SunSaver MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SunSaver MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar SunSaver MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: SUNSAVER-MPPT Description:Array Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x0009	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: SUNSAVER-MPPT Description:Array Max. Power Point Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 5000.0] Modbus address:0x0028	SNMP agent	array.sweep_vmp[arrayVmp.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_voc[arrayVoc.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: SUNSAVER-MPPT Description:Array Open Circuit Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x002A	SNMP agent	array.sweep_pmax[arrayMaxPowerSweep.0] Preprocessing Custom multiplier: `0.01509857178` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: SUNSAVER-MPPT Description:Control State Modbus address:0x0011 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: BulkMppt 6: Pwm 7: Float 8: Equalize	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: SUNSAVER-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.003051757813`
Battery: Target Voltage	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	target.voltage[targetVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: SUNSAVER-MPPT Description:Target Regulation Voltage Scaling Factor:0.0030517578125 Units:V Range:[0.0, 80.0] Modbus address:0x0014	SNMP agent	charge.current[chargeCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SUNSAVER-MPPT Description:Load State Modbus address:0x001A 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: NormalOff 7: Override 8: NotUsed	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: Voltage	MIB: SUNSAVER-MPPT Description:Load Voltage Scaling Factor:0.0030517578125 Units:V Range:[0, 80] Modbus address:0x000A	SNMP agent	load.voltage[loadVoltage.0] Preprocessing Custom multiplier: `0.003051757813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: Current	MIB: SUNSAVER-MPPT Description:Load Current Scaling Factor:0.002415771484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP agent	load.current[loadCurrent.0] Preprocessing Custom multiplier: `0.002415771484` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Ambient	MIB: SUNSAVER-MPPT Description:Ambient Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000F	SNMP agent	temp.ambient[ambientTemperature.0]
Temperature: Battery	MIB: SUNSAVER-MPPT Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000D	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: SUNSAVER-MPPT Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-128, 127] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Charge(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x0015 L=0x0016	SNMP agent	counter.charge_amp_hours[ahChargeResettable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: SUNSAVER-MPPT	SNMP agent	counter.charge_kw_hours[kwhCharge.0]
Counter: Load Amp-hours	MIB: SUNSAVER-MPPT Description:Ah Load(Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 4294967294] Modbus addresses:H=0x001D L=0x001E	SNMP agent	counter.load_amp_hours[ahLoadResettable.0] Preprocessing Custom multiplier: `0.1`
Status: Array Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.array_faults[arrayFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Load Faults	MIB: SUNSAVER-MPPT Description:Array Faults Modbus address:0x0012	SNMP agent	status.load_faults[loadFaults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SUNSAVER-MPPT Description:Alarms Modbus addresses:H=0x0023 L=0x0024	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SunSaver MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar SunSaver MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SunSaver MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar SunSaver MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Load: Device load in warning state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SunSaver MPPT by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Temperature: Low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar SunSaver MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "softwareFault" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","softwareFault")=2`	High
Status: Device has "batteryHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "customSettingsEdit" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsNoLongerValid" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","rtsNoLongerValid")=2`	High
Status: Device has "localTempSensorDamaged" array faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.array_faults[arrayFaults.0],#3,"like","localTempSensorDamaged")=2`	High
Status: Device has "externalShortCircuit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","externalShortCircuit")=2`	High
Status: Device has "overcurrent" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetShorted" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","mosfetShorted")=2`	High
Status: Device has "software" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","software")=2`	High
Status: Device has "loadHvd" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","loadHvd")=2`	High
Status: Device has "highTempDisconnect" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","highTempDisconnect")=2`	High
Status: Device has "customSettingsEdit" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "unknownLoadFault" load faults flag		`count(/Morningstar SunSaver MPPT by SNMP/status.load_faults[loadFaults.0],#3,"like","unknownLoadFault")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "sspptHot" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","sspptHot")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Status: Device has "highVaCurrentLimit" alarm flag		`count(/Morningstar SunSaver MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVaCurrentLimit")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SUNSAVER-MPPT

Description:Control State

Modbus address:0x0011

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.003051757813
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar SunSaver MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_suresine_snmp

Morningstar SureSine by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SureSine monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar SureSine

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Battery: Battery Voltage discovery	MIB: SURESINE	SNMP agent	battery.voltage.discovery[batteryVoltageSlow.0] Preprocessing Custom multiplier: `2.581787109375E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SURESINE Description:Load State Modbus address:0x000B 0: Start 1: LoadOn 2: LvdWarning 3: LowVoltageDisconnect 4: Fault 5: Disconnect 6: NormalOff 7: UnknownState 8: Standby	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: A/C Current	MIB: SURESINE Description:AC Output Current Scaling Factor:0.0001953125 Units:A Range:[0.0, 17] Modbus address:0x0005	SNMP agent	load.ac_current[acCurrent.0] Preprocessing Custom multiplier: `1.953125E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Heatsink	MIB: SURESINE Description:Heatsink Temperature Scaling Factor:1 Units:C Range:[-128, 127] Modbus address:0x0006	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar SureSine: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar SureSine: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar SureSine: Load: Device load in warning state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar SureSine: Load: Device load in critical state
Morningstar SureSine: Load: Device load in critical state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar SureSine: Status: Device has "reset" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Morningstar SureSine: Status: Device has "overcurrent" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar SureSine: Status: Device has "unknownFault" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2`	High
Morningstar SureSine: Status: Device has "software" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2`	High
Morningstar SureSine: Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Morningstar SureSine: Status: Device has "suresineHot" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2`	High
Morningstar SureSine: Status: Device has "dipSwitchChanged" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar SureSine: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SureSine: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar SureSine: Status: Device has "heatsinkTempSensorShort" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2`	Warning
Morningstar SureSine: Status: Device has "unknownAlarm" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2`	Warning
Morningstar SureSine: Status: Device has "suresineHot" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SURESINE

Description:Battery Voltage(slow)

Scaling Factor:0.0002581787109375

Units:V

Range:[0.0, 17.0]

Modbus address:0x0004

SNMP agent

battery.voltage[batteryVoltageSlow.0{#SINGLETON}]

Preprocessing

Custom multiplier: 2.581787109375E-4
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar SureSine: Battery: Low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar SureSine: Battery: Critically low battery voltage
Morningstar SureSine: Battery: Critically low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar SureSine: Battery: High battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar SureSine: Battery: Critically high battery voltage
Morningstar SureSine: Battery: Critically high battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_suresine_snmp

Morningstar SureSine by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SureSine monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar SureSine

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Battery: Battery Voltage discovery	MIB: SURESINE	SNMP agent	battery.voltage.discovery[batteryVoltageSlow.0] Preprocessing Custom multiplier: `2.581787109375E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SURESINE Description:Load State Modbus address:0x000B 0: Start 1: LoadOn 2: LvdWarning 3: LowVoltageDisconnect 4: Fault 5: Disconnect 6: NormalOff 7: UnknownState 8: Standby	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: A/C Current	MIB: SURESINE Description:AC Output Current Scaling Factor:0.0001953125 Units:A Range:[0.0, 17] Modbus address:0x0005	SNMP agent	load.ac_current[acCurrent.0] Preprocessing Custom multiplier: `1.953125E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Heatsink	MIB: SURESINE Description:Heatsink Temperature Scaling Factor:1 Units:C Range:[-128, 127] Modbus address:0x0006	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar SureSine: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar SureSine: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar SureSine: Load: Device load in warning state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar SureSine: Load: Device load in critical state
Morningstar SureSine: Load: Device load in critical state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar SureSine: Status: Device has "reset" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Morningstar SureSine: Status: Device has "overcurrent" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar SureSine: Status: Device has "unknownFault" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2`	High
Morningstar SureSine: Status: Device has "software" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2`	High
Morningstar SureSine: Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Morningstar SureSine: Status: Device has "suresineHot" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2`	High
Morningstar SureSine: Status: Device has "dipSwitchChanged" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar SureSine: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SureSine: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar SureSine: Status: Device has "heatsinkTempSensorShort" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2`	Warning
Morningstar SureSine: Status: Device has "unknownAlarm" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2`	Warning
Morningstar SureSine: Status: Device has "suresineHot" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SURESINE

Description:Battery Voltage(slow)

Scaling Factor:0.0002581787109375

Units:V

Range:[0.0, 17.0]

Modbus address:0x0004

SNMP agent

battery.voltage[batteryVoltageSlow.0{#SINGLETON}]

Preprocessing

Custom multiplier: 2.581787109375E-4
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar SureSine: Battery: Low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar SureSine: Battery: Critically low battery voltage
Morningstar SureSine: Battery: Critically low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar SureSine: Battery: High battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar SureSine: Battery: Critically high battery voltage
Morningstar SureSine: Battery: Critically high battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_suresine_snmp

Morningstar SureSine by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SureSine monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar SureSine

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Battery: Battery Voltage discovery	MIB: SURESINE	SNMP agent	battery.voltage.discovery[batteryVoltageSlow.0] Preprocessing Custom multiplier: `2.581787109375E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SURESINE Description:Load State Modbus address:0x000B 0: Start 1: LoadOn 2: LvdWarning 3: LowVoltageDisconnect 4: Fault 5: Disconnect 6: NormalOff 7: UnknownState 8: Standby	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: A/C Current	MIB: SURESINE Description:AC Output Current Scaling Factor:0.0001953125 Units:A Range:[0.0, 17] Modbus address:0x0005	SNMP agent	load.ac_current[acCurrent.0] Preprocessing Custom multiplier: `1.953125E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Heatsink	MIB: SURESINE Description:Heatsink Temperature Scaling Factor:1 Units:C Range:[-128, 127] Modbus address:0x0006	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar SureSine: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar SureSine: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar SureSine: Load: Device load in warning state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar SureSine: Load: Device load in critical state
Morningstar SureSine: Load: Device load in critical state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Morningstar SureSine: Status: Device has "reset" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Morningstar SureSine: Status: Device has "overcurrent" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar SureSine: Status: Device has "unknownFault" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2`	High
Morningstar SureSine: Status: Device has "software" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2`	High
Morningstar SureSine: Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Morningstar SureSine: Status: Device has "suresineHot" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2`	High
Morningstar SureSine: Status: Device has "dipSwitchChanged" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2`	High
Morningstar SureSine: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar SureSine: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar SureSine: Status: Device has "heatsinkTempSensorShort" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2`	Warning
Morningstar SureSine: Status: Device has "unknownAlarm" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2`	Warning
Morningstar SureSine: Status: Device has "suresineHot" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SURESINE

Description:Battery Voltage(slow)

Scaling Factor:0.0002581787109375

Units:V

Range:[0.0, 17.0]

Modbus address:0x0004

SNMP agent

battery.voltage[batteryVoltageSlow.0{#SINGLETON}]

Preprocessing

Custom multiplier: 2.581787109375E-4
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar SureSine: Battery: Low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar SureSine: Battery: Critically low battery voltage
Morningstar SureSine: Battery: Critically low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar SureSine: Battery: High battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar SureSine: Battery: Critically high battery voltage
Morningstar SureSine: Battery: Critically high battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_suresine_snmp

Morningstar SureSine by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SureSine monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar SureSine

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Battery: Battery Voltage discovery	MIB: SURESINE	SNMP agent	battery.voltage.discovery[batteryVoltageSlow.0] Preprocessing Custom multiplier: `2.581787109375E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SURESINE Description:Load State Modbus address:0x000B 0: Start 1: LoadOn 2: LvdWarning 3: LowVoltageDisconnect 4: Fault 5: Disconnect 6: NormalOff 7: UnknownState 8: Standby	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: A/C Current	MIB: SURESINE Description:AC Output Current Scaling Factor:0.0001953125 Units:A Range:[0.0, 17] Modbus address:0x0005	SNMP agent	load.ac_current[acCurrent.0] Preprocessing Custom multiplier: `1.953125E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Heatsink	MIB: SURESINE Description:Heatsink Temperature Scaling Factor:1 Units:C Range:[-128, 127] Modbus address:0x0006	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Load: Device load in warning state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Status: Device has "reset" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "unknownFault" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2`	High
Status: Device has "software" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2`	High
Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Status: Device has "suresineHot" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2`	High
Status: Device has "dipSwitchChanged" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShort" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2`	Warning
Status: Device has "unknownAlarm" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2`	Warning
Status: Device has "suresineHot" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SURESINE

Description:Battery Voltage(slow)

Scaling Factor:0.0002581787109375

Units:V

Range:[0.0, 17.0]

Modbus address:0x0004

SNMP agent

battery.voltage[batteryVoltageSlow.0{#SINGLETON}]

Preprocessing

Custom multiplier: 2.581787109375E-4
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_suresine_snmp

Morningstar SureSine by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

DEPENDENT

battery.voltage.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group	Name	Description	Type	Key and additional info
Battery	Battery: Voltage{#SINGLETON}	MIB: SURESINE Description:Battery Voltage(slow) Scaling Factor:0.0002581787109375 Units:V Range:[0.0, 17.0] Modbus address:0x0004	SNMP	battery.voltage[batteryVoltageSlow.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `2.581787109375E-4` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Load	Load: State	MIB: SURESINE Description:Load State Modbus address:0x000B 0: Start 1: LoadOn 2: LvdWarning 3: LowVoltageDisconnect 4: Fault 5: Disconnect 6: NormalOff 7: UnknownState 8: Standby	SNMP	load.state[loadState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Load	Load: A/C Current	MIB: SURESINE Description:AC Output Current Scaling Factor:0.0001953125 Units:A Range:[0.0, 17] Modbus address:0x0005	SNMP	load.ac_current[acCurrent.0] Preprocessing: - MULTIPLIER: `1.953125E-4` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Faults	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP	status.faults[faults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Heatsink	MIB: SURESINE Description:Heatsink Temperature Scaling Factor:1 Units:C Range:[-128, 127] Modbus address:0x0006	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: SURESINE	SNMP	battery.voltage.discovery[batteryVoltageSlow.0] Preprocessing: - MULTIPLIER: `2.581787109375E-4` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	-	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Load: Device load in warning state	-	`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	WARNING	Depends on: - Load: Device load in critical state
Load: Device load in critical state	-	`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "reset" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2`	HIGH
Status: Device has "overcurrent" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "unknownFault" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2`	HIGH
Status: Device has "software" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2`	HIGH
Status: Device has "highVoltageDisconnect" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	HIGH
Status: Device has "suresineHot" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2`	HIGH
Status: Device has "dipSwitchChanged" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2`	HIGH
Status: Device has "customSettingsEdit" faults flag	-	`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShort" alarm flag	-	`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2`	WARNING
Status: Device has "unknownAlarm" alarm flag	-	`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2`	WARNING
Status: Device has "suresineHot" alarm flag	-	`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2`	WARNING

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_suresine_snmp

Morningstar SureSine by SNMP

Overview

This template is designed for the effortless deployment of Morningstar SureSine monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar SureSine

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Battery: Battery Voltage discovery	MIB: SURESINE	SNMP agent	battery.voltage.discovery[batteryVoltageSlow.0] Preprocessing Custom multiplier: `2.581787109375E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Load: State	MIB: SURESINE Description:Load State Modbus address:0x000B 0: Start 1: LoadOn 2: LvdWarning 3: LowVoltageDisconnect 4: Fault 5: Disconnect 6: NormalOff 7: UnknownState 8: Standby	SNMP agent	load.state[loadState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Load: A/C Current	MIB: SURESINE Description:AC Output Current Scaling Factor:0.0001953125 Units:A Range:[0.0, 17] Modbus address:0x0005	SNMP agent	load.ac_current[acCurrent.0] Preprocessing Custom multiplier: `1.953125E-4` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Heatsink	MIB: SURESINE Description:Heatsink Temperature Scaling Factor:1 Units:C Range:[-128, 127] Modbus address:0x0006	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: SURESINE Description:Faults Modbus address:0x0007	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar SureSine by SNMP/status.hw.uptime)>0 and last(/Morningstar SureSine by SNMP/status.hw.uptime)<10m) or (last(/Morningstar SureSine by SNMP/status.hw.uptime)=0 and last(/Morningstar SureSine by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar SureSine by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Load: Device load in warning state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar SureSine by SNMP/load.state[loadState.0])={$LOAD.STATE.CRIT:"fault"}`	High
Status: Device has "reset" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "unknownFault" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","unknownFault")=2`	High
Status: Device has "software" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","software")=2`	High
Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Status: Device has "suresineHot" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","suresineHot")=2`	High
Status: Device has "dipSwitchChanged" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","dipSwitchChanged")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar SureSine by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShort" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShort")=2`	Warning
Status: Device has "unknownAlarm" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","unknownAlarm")=2`	Warning
Status: Device has "suresineHot" alarm flag		`count(/Morningstar SureSine by SNMP/status.alarms[alarms.0],#3,"like","suresineHot")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: SURESINE

Description:Battery Voltage(slow)

Scaling Factor:0.0002581787109375

Units:V

Range:[0.0, 17.0]

Modbus address:0x0004

SNMP agent

battery.voltage[batteryVoltageSlow.0{#SINGLETON}]

Preprocessing

Custom multiplier: 2.581787109375E-4
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar SureSine by SNMP/battery.voltage[batteryVoltageSlow.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_snmp

Morningstar TriStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.005493164063`
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:0.1 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:0.1 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar MPPT: Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Device charge in critical state
Morningstar TriStar MPPT: Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar TriStar MPPT: Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Temperature: Critically low battery temperature
Morningstar TriStar MPPT: Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar MPPT: Temperature: High battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Temperature: Critically high battery temperature
Morningstar TriStar MPPT: Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar MPPT: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar MPPT: Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Morningstar TriStar MPPT: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar MPPT: Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Morningstar TriStar MPPT: Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Morningstar TriStar MPPT: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar MPPT: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar MPPT: Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Morningstar TriStar MPPT: Status: Device has "slaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","slaveControlTimeout")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:0.0054931640625

Units:V

Range:[-10, 180.0]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.005493164063
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT: Battery: Low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Critically low battery voltage
Morningstar TriStar MPPT: Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar MPPT: Battery: High battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Critically high battery voltage
Morningstar TriStar MPPT: Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_snmp

Morningstar TriStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.005493164063`
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:0.1 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:0.1 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar MPPT: Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Device charge in critical state
Morningstar TriStar MPPT: Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar TriStar MPPT: Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Temperature: Critically low battery temperature
Morningstar TriStar MPPT: Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar MPPT: Temperature: High battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Temperature: Critically high battery temperature
Morningstar TriStar MPPT: Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar MPPT: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar MPPT: Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Morningstar TriStar MPPT: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar MPPT: Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Morningstar TriStar MPPT: Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Morningstar TriStar MPPT: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar MPPT: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar MPPT: Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Morningstar TriStar MPPT: Status: Device has "slaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","slaveControlTimeout")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:0.0054931640625

Units:V

Range:[-10, 180.0]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.005493164063
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT: Battery: Low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Critically low battery voltage
Morningstar TriStar MPPT: Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar MPPT: Battery: High battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Critically high battery voltage
Morningstar TriStar MPPT: Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_snmp

Morningstar TriStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.005493164063`
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:0.1 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:0.1 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar MPPT: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar MPPT: Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Device charge in critical state
Morningstar TriStar MPPT: Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar TriStar MPPT: Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Temperature: Critically low battery temperature
Morningstar TriStar MPPT: Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar MPPT: Temperature: High battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Temperature: Critically high battery temperature
Morningstar TriStar MPPT: Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar MPPT: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar MPPT: Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Morningstar TriStar MPPT: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar MPPT: Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Morningstar TriStar MPPT: Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Morningstar TriStar MPPT: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar MPPT: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar MPPT: Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Morningstar TriStar MPPT: Status: Device has "slaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","slaveControlTimeout")=2`	High
Morningstar TriStar MPPT: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Morningstar TriStar MPPT: Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:0.0054931640625

Units:V

Range:[-10, 180.0]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.005493164063
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT: Battery: Low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Critically low battery voltage
Morningstar TriStar MPPT: Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar MPPT: Battery: High battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT: Battery: Critically high battery voltage
Morningstar TriStar MPPT: Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_snmp

Morningstar TriStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.005493164063`
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:0.1 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:0.1 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Status: Device has "slaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","slaveControlTimeout")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:0.0054931640625

Units:V

Range:[-10, 180.0]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.005493164063
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_snmp

Morningstar TriStar MPPT by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

DEPENDENT

battery.voltage.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group	Name	Description	Type	Key and additional info
Array	Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180] Modbus address:0x001b	SNMP	array.voltage[arrayVoltage.0] Preprocessing: - MULTIPLIER: `0.005493164063` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP	array.current[arrayCurrent.0] Preprocessing: - MULTIPLIER: `0.00244140625` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003d	SNMP	array.sweep_vmp[arrayVmpLastSweep.0] Preprocessing: - MULTIPLIER: `0.005493164063` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003e	SNMP	array.sweep_voc[arrayVocLastSweep.0] Preprocessing: - MULTIPLIER: `0.005493164063` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Array	Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP	array.sweep_pmax[arrayPmaxLastSweep.0] Preprocessing: - MULTIPLIER: `0.1098632813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave	SNMP	charge.state[chargeState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0033	SNMP	target.voltage[targetRegulationVoltage.0] Preprocessing: - MULTIPLIER: `0.005493164063` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP	charge.current[batteryCurrent.0] Preprocessing: - MULTIPLIER: `0.00244140625` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003a	SNMP	charge.output_power[ outputPower.0] Preprocessing: - MULTIPLIER: `0.1098632813` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Voltage{#SINGLETON}	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0018	SNMP	battery.voltage[batteryVoltage.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.005493164063` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Counter	Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:0.1 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP	counter.charge_amp_hours[ahChargeResetable.0] Preprocessing: - MULTIPLIER: `0.1`
Counter	Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:0.1 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP	counter.charge_kw_hours[kwhChargeResetable.0]
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP	status.faults[faults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP	temp.battery[batteryTemperature.0]
Temperature	Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT	SNMP	battery.voltage.discovery[batteryVoltage.0] Preprocessing: - MULTIPLIER: `0.005493164063`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state	-	`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	WARNING	Depends on: - Battery: Device charge in critical state
Battery: Device charge in critical state	-	`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	HIGH
Battery: Low battery voltage	-	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "overcurrent" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "fetShort" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	HIGH
Status: Device has "softwareFault" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	HIGH
Status: Device has "batteryHvd" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	HIGH
Status: Device has "arrayHvd" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	HIGH
Status: Device has "dipSwitchChange" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	HIGH
Status: Device has "customSettingsEdit" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "rtsShorted" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	HIGH
Status: Device has "rtsDisconnected" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	HIGH
Status: Device has "eepromRetryLimit" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	HIGH
Status: Device has "slaveControlTimeout" faults flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","slaveControlTimeout")=2`	HIGH
Status: Device has "rtsShorted" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	WARNING
Status: Device has "rtsDisconnected" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	WARNING
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShorted" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	WARNING
Status: Device has "highTemperatureCurrentLimit" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	WARNING
Status: Device has "currentLimit" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	WARNING
Status: Device has "currentOffset" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	WARNING
Status: Device has "batterySense" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	WARNING
Status: Device has "batterySenseDisconnected" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	WARNING
Status: Device has "uncalibrated" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	WARNING
Status: Device has "rtsMiswire" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	WARNING
Status: Device has "highVoltageDisconnect" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	WARNING
Status: Device has "systemMiswire" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	WARNING
Status: Device has "mosfetSOpen" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	WARNING
Status: Device has "p12VoltageReferenceOff" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	WARNING
Status: Device has "highArrayVCurrentLimit" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	WARNING
Status: Device has "maxAdcValueReached" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	WARNING
Status: Device has "controllerWasReset" alarm flag	-	`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	WARNING
Temperature: Low battery temperature	-	`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	WARNING	Depends on: - Temperature: Critically low battery temperature
Temperature: Critically low battery temperature	-	`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	HIGH
Temperature: High battery temperature	-	`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	WARNING	Depends on: - Temperature: Critically high battery temperature
Temperature: Critically high battery temperature	-	`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	HIGH

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_snmp

Morningstar TriStar MPPT by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.005493164063`
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:0.0054931640625 Units:V Range:[-10, 180.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Custom multiplier: `0.005493164063` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:0.00244140625 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0] Preprocessing Custom multiplier: `0.00244140625` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:0.10986328125 Units:W Range:[-10, 5000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0] Preprocessing Custom multiplier: `0.1098632813` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:0.1 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0] Preprocessing Custom multiplier: `0.1`
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:0.1 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Faults Modbus address:0x002c	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Status: Device has "slaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT by SNMP/status.faults[faults.0],#3,"like","slaveControlTimeout")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:0.0054931640625

Units:V

Range:[-10, 180.0]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.005493164063
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_600V_snmp

Morningstar TriStar MPPT 600V by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT 600V monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT 600V

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:1.0 Units:V Range:[-10, 650] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0]
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0]
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0]
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0]
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:1.0 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0]
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP agent	battery.voltage.discovery[batteryVoltage.0]
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0]
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:1.0 Units:W Range:[-10, 4000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0]
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:1.0 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0]
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:1.0 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus addresses:H=0x002c L=0x002d	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Alarms Modbus addresses:H=0x002e L=0x002f	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT 600V: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar MPPT 600V: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar MPPT 600V: Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Device charge in critical state
Morningstar TriStar MPPT 600V: Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar TriStar MPPT 600V: Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Temperature: Critically low battery temperature
Morningstar TriStar MPPT 600V: Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar MPPT 600V: Temperature: High battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Temperature: Critically high battery temperature
Morningstar TriStar MPPT 600V: Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar MPPT 600V: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "controllerWasReset" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","controllerWasReset")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "chargeSlaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","chargeSlaveControlTimeout")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rs232SerialToMeterBridge" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rs232SerialToMeterBridge")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "batteryLvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryLvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "powerboardCommunicationFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","powerboardCommunicationFault")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault16Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault16Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault17Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault17Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault18Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault18Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault19Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault19Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault20Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault20Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault21Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault21Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fpgaVersion" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fpgaVersion")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "currentSensorReferenceOutOfRange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","currentSensorReferenceOutOfRange")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "ia-refSlaveModeTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","ia-refSlaveModeTimeout")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "blockbusBoot" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","blockbusBoot")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "hscommMaster" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscommMaster")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "hscomm" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscomm")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "slave" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","slave")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "p12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "alarm21Internal" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","alarm21Internal")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "p3VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p3VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "derateLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","derateLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "ee-i2cRetryLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ee-i2cRetryLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "ethernetAlarm" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ethernetAlarm")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "lvd" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","lvd")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "software" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","software")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "fp12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","fp12VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "extflashFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","extflashFault")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "slaveControlFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","slaveControlFault")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:1.0

Units:V

Range:[-10, 80]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT 600V: Battery: Low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Critically low battery voltage
Morningstar TriStar MPPT 600V: Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar MPPT 600V: Battery: High battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Critically high battery voltage
Morningstar TriStar MPPT 600V: Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_600V_snmp

Morningstar TriStar MPPT 600V by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT 600V monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT 600V

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:1.0 Units:V Range:[-10, 650] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0]
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0]
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0]
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0]
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:1.0 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0]
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP agent	battery.voltage.discovery[batteryVoltage.0]
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0]
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:1.0 Units:W Range:[-10, 4000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0]
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:1.0 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0]
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:1.0 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus addresses:H=0x002c L=0x002d	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Alarms Modbus addresses:H=0x002e L=0x002f	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT 600V: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar MPPT 600V: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar MPPT 600V: Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Device charge in critical state
Morningstar TriStar MPPT 600V: Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar TriStar MPPT 600V: Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Temperature: Critically low battery temperature
Morningstar TriStar MPPT 600V: Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar MPPT 600V: Temperature: High battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Temperature: Critically high battery temperature
Morningstar TriStar MPPT 600V: Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar MPPT 600V: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "controllerWasReset" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","controllerWasReset")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "chargeSlaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","chargeSlaveControlTimeout")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rs232SerialToMeterBridge" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rs232SerialToMeterBridge")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "batteryLvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryLvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "powerboardCommunicationFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","powerboardCommunicationFault")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault16Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault16Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault17Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault17Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault18Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault18Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault19Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault19Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault20Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault20Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault21Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault21Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fpgaVersion" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fpgaVersion")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "currentSensorReferenceOutOfRange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","currentSensorReferenceOutOfRange")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "ia-refSlaveModeTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","ia-refSlaveModeTimeout")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "blockbusBoot" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","blockbusBoot")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "hscommMaster" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscommMaster")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "hscomm" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscomm")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "slave" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","slave")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "p12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "alarm21Internal" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","alarm21Internal")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "p3VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p3VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "derateLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","derateLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "ee-i2cRetryLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ee-i2cRetryLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "ethernetAlarm" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ethernetAlarm")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "lvd" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","lvd")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "software" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","software")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "fp12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","fp12VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "extflashFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","extflashFault")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "slaveControlFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","slaveControlFault")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:1.0

Units:V

Range:[-10, 80]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT 600V: Battery: Low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Critically low battery voltage
Morningstar TriStar MPPT 600V: Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar MPPT 600V: Battery: High battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Critically high battery voltage
Morningstar TriStar MPPT 600V: Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_600V_snmp

Morningstar TriStar MPPT 600V by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT 600V monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT 600V

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:1.0 Units:V Range:[-10, 650] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0]
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0]
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0]
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0]
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:1.0 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0]
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP agent	battery.voltage.discovery[batteryVoltage.0]
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0]
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:1.0 Units:W Range:[-10, 4000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0]
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:1.0 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0]
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:1.0 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus addresses:H=0x002c L=0x002d	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Alarms Modbus addresses:H=0x002e L=0x002f	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT 600V: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar MPPT 600V: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar MPPT 600V: Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Device charge in critical state
Morningstar TriStar MPPT 600V: Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Morningstar TriStar MPPT 600V: Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Temperature: Critically low battery temperature
Morningstar TriStar MPPT 600V: Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar MPPT 600V: Temperature: High battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Temperature: Critically high battery temperature
Morningstar TriStar MPPT 600V: Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar MPPT 600V: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "controllerWasReset" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","controllerWasReset")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "chargeSlaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","chargeSlaveControlTimeout")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rs232SerialToMeterBridge" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rs232SerialToMeterBridge")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "batteryLvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryLvd")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "powerboardCommunicationFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","powerboardCommunicationFault")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault16Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault16Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault17Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault17Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault18Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault18Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault19Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault19Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault20Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault20Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fault21Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault21Software")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "fpgaVersion" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fpgaVersion")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "currentSensorReferenceOutOfRange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","currentSensorReferenceOutOfRange")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "ia-refSlaveModeTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","ia-refSlaveModeTimeout")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "blockbusBoot" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","blockbusBoot")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "hscommMaster" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscommMaster")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "hscomm" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscomm")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "slave" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","slave")=2`	High
Morningstar TriStar MPPT 600V: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "p12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "alarm21Internal" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","alarm21Internal")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "p3VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p3VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "derateLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","derateLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "ee-i2cRetryLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ee-i2cRetryLimit")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "ethernetAlarm" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ethernetAlarm")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "lvd" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","lvd")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "software" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","software")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "fp12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","fp12VoltageOutOfRange")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "extflashFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","extflashFault")=2`	Warning
Morningstar TriStar MPPT 600V: Status: Device has "slaveControlFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","slaveControlFault")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:1.0

Units:V

Range:[-10, 80]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar MPPT 600V: Battery: Low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Critically low battery voltage
Morningstar TriStar MPPT 600V: Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar MPPT 600V: Battery: High battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar MPPT 600V: Battery: Critically high battery voltage
Morningstar TriStar MPPT 600V: Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_600V_snmp

Morningstar TriStar MPPT 600V by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT 600V monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT 600V

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:1.0 Units:V Range:[-10, 650] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0]
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0]
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0]
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0]
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:1.0 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0]
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP agent	battery.voltage.discovery[batteryVoltage.0]
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0]
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:1.0 Units:W Range:[-10, 4000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0]
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:1.0 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0]
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:1.0 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus addresses:H=0x002c L=0x002d	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Alarms Modbus addresses:H=0x002e L=0x002f	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Status: Device has "controllerWasReset" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","controllerWasReset")=2`	High
Status: Device has "chargeSlaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","chargeSlaveControlTimeout")=2`	High
Status: Device has "rs232SerialToMeterBridge" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rs232SerialToMeterBridge")=2`	High
Status: Device has "batteryLvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryLvd")=2`	High
Status: Device has "powerboardCommunicationFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","powerboardCommunicationFault")=2`	High
Status: Device has "fault16Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault16Software")=2`	High
Status: Device has "fault17Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault17Software")=2`	High
Status: Device has "fault18Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault18Software")=2`	High
Status: Device has "fault19Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault19Software")=2`	High
Status: Device has "fault20Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault20Software")=2`	High
Status: Device has "fault21Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault21Software")=2`	High
Status: Device has "fpgaVersion" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fpgaVersion")=2`	High
Status: Device has "currentSensorReferenceOutOfRange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","currentSensorReferenceOutOfRange")=2`	High
Status: Device has "ia-refSlaveModeTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","ia-refSlaveModeTimeout")=2`	High
Status: Device has "blockbusBoot" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","blockbusBoot")=2`	High
Status: Device has "hscommMaster" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscommMaster")=2`	High
Status: Device has "hscomm" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscomm")=2`	High
Status: Device has "slave" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","slave")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageOutOfRange")=2`	Warning
Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning
Status: Device has "alarm21Internal" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","alarm21Internal")=2`	Warning
Status: Device has "p3VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p3VoltageOutOfRange")=2`	Warning
Status: Device has "derateLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","derateLimit")=2`	Warning
Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Status: Device has "ee-i2cRetryLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ee-i2cRetryLimit")=2`	Warning
Status: Device has "ethernetAlarm" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ethernetAlarm")=2`	Warning
Status: Device has "lvd" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","lvd")=2`	Warning
Status: Device has "software" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","software")=2`	Warning
Status: Device has "fp12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","fp12VoltageOutOfRange")=2`	Warning
Status: Device has "extflashFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","extflashFault")=2`	Warning
Status: Device has "slaveControlFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","slaveControlFault")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:1.0

Units:V

Range:[-10, 80]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_600V_snmp

Morningstar TriStar MPPT 600V by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

DEPENDENT

battery.voltage.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Items collected

Group	Name	Description	Type	Key and additional info
Array	Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:1.0 Units:V Range:[-10, 650] Modbus address:0x001b	SNMP	array.voltage[arrayVoltage.0]
Array	Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP	array.current[arrayCurrent.0]
Array	Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003d	SNMP	array.sweep_vmp[arrayVmpLastSweep.0]
Array	Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003e	SNMP	array.sweep_voc[arrayVocLastSweep.0]
Array	Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:1.0 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP	array.sweep_pmax[arrayPmaxLastSweep.0]
Battery	Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP	charge.state[chargeState.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x0033	SNMP	target.voltage[targetRegulationVoltage.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP	charge.current[batteryCurrent.0]
Battery	Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:1.0 Units:W Range:[-10, 4000] Modbus address:0x003a	SNMP	charge.output_power[ outputPower.0]
Battery	Battery: Voltage{#SINGLETON}	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP	battery.voltage[batteryVoltage.0{#SINGLETON}]
Counter	Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:1.0 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP	counter.charge_amp_hours[ahChargeResetable.0]
Counter	Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:1.0 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP	counter.charge_kw_hours[kwhChargeResetable.0]
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus addresses:H=0x002c L=0x002d	SNMP	status.faults[faults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: TRISTAR-MPPT Description:Alarms Modbus addresses:H=0x002e L=0x002f	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP	temp.battery[batteryTemperature.0]
Temperature	Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP	battery.voltage.discovery[batteryVoltage.0]

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state	-	`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	WARNING	Depends on: - Battery: Device charge in critical state
Battery: Device charge in critical state	-	`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	HIGH
Battery: Low battery voltage	-	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "overcurrent" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "fetShort" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	HIGH
Status: Device has "softwareFault" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	HIGH
Status: Device has "batteryHvd" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	HIGH
Status: Device has "arrayHvd" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	HIGH
Status: Device has "dipSwitchChange" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	HIGH
Status: Device has "customSettingsEdit" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "rtsShorted" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	HIGH
Status: Device has "rtsDisconnected" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	HIGH
Status: Device has "eepromRetryLimit" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	HIGH
Status: Device has "controllerWasReset" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","controllerWasReset")=2`	HIGH
Status: Device has "chargeSlaveControlTimeout" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","chargeSlaveControlTimeout")=2`	HIGH
Status: Device has "rs232SerialToMeterBridge" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rs232SerialToMeterBridge")=2`	HIGH
Status: Device has "batteryLvd" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryLvd")=2`	HIGH
Status: Device has "powerboardCommunicationFault" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","powerboardCommunicationFault")=2`	HIGH
Status: Device has "fault16Software" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault16Software")=2`	HIGH
Status: Device has "fault17Software" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault17Software")=2`	HIGH
Status: Device has "fault18Software" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault18Software")=2`	HIGH
Status: Device has "fault19Software" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault19Software")=2`	HIGH
Status: Device has "fault20Software" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault20Software")=2`	HIGH
Status: Device has "fault21Software" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault21Software")=2`	HIGH
Status: Device has "fpgaVersion" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fpgaVersion")=2`	HIGH
Status: Device has "currentSensorReferenceOutOfRange" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","currentSensorReferenceOutOfRange")=2`	HIGH
Status: Device has "ia-refSlaveModeTimeout" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","ia-refSlaveModeTimeout")=2`	HIGH
Status: Device has "blockbusBoot" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","blockbusBoot")=2`	HIGH
Status: Device has "hscommMaster" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscommMaster")=2`	HIGH
Status: Device has "hscomm" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscomm")=2`	HIGH
Status: Device has "slave" faults flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","slave")=2`	HIGH
Status: Device has "rtsShorted" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	WARNING
Status: Device has "rtsDisconnected" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	WARNING
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShorted" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	WARNING
Status: Device has "highTemperatureCurrentLimit" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	WARNING
Status: Device has "currentLimit" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	WARNING
Status: Device has "currentOffset" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	WARNING
Status: Device has "batterySense" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	WARNING
Status: Device has "batterySenseDisconnected" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	WARNING
Status: Device has "uncalibrated" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	WARNING
Status: Device has "rtsMiswire" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	WARNING
Status: Device has "highVoltageDisconnect" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	WARNING
Status: Device has "systemMiswire" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	WARNING
Status: Device has "mosfetSOpen" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	WARNING
Status: Device has "p12VoltageOutOfRange" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageOutOfRange")=2`	WARNING
Status: Device has "highArrayVCurrentLimit" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	WARNING
Status: Device has "maxAdcValueReached" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	WARNING
Status: Device has "controllerWasReset" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	WARNING
Status: Device has "alarm21Internal" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","alarm21Internal")=2`	WARNING
Status: Device has "p3VoltageOutOfRange" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p3VoltageOutOfRange")=2`	WARNING
Status: Device has "derateLimit" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","derateLimit")=2`	WARNING
Status: Device has "arrayCurrentOffset" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	WARNING
Status: Device has "ee-i2cRetryLimit" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ee-i2cRetryLimit")=2`	WARNING
Status: Device has "ethernetAlarm" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ethernetAlarm")=2`	WARNING
Status: Device has "lvd" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","lvd")=2`	WARNING
Status: Device has "software" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","software")=2`	WARNING
Status: Device has "fp12VoltageOutOfRange" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","fp12VoltageOutOfRange")=2`	WARNING
Status: Device has "extflashFault" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","extflashFault")=2`	WARNING
Status: Device has "slaveControlFault" alarm flag	-	`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","slaveControlFault")=2`	WARNING
Temperature: Low battery temperature	-	`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	WARNING	Depends on: - Temperature: Critically low battery temperature
Temperature: Critically low battery temperature	-	`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	HIGH
Temperature: High battery temperature	-	`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	WARNING	Depends on: - Temperature: Critically high battery temperature
Temperature: Critically high battery temperature	-	`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	HIGH

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_mppt_600V_snmp

Morningstar TriStar MPPT 600V by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar MPPT 600V monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar MPPT 600V

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Array: Voltage	MIB: TRISTAR-MPPT Description:Array Voltage Scaling Factor:1.0 Units:V Range:[-10, 650] Modbus address:0x001b	SNMP agent	array.voltage[arrayVoltage.0]
Array: Array Current	MIB: TRISTAR-MPPT Description:Array Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001d	SNMP agent	array.current[arrayCurrent.0]
Array: Sweep Vmp	MIB: TRISTAR-MPPT Description:Vmp (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003d	SNMP agent	array.sweep_vmp[arrayVmpLastSweep.0]
Array: Sweep Voc	MIB: TRISTAR-MPPT Description:Voc (last sweep) Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x003e	SNMP agent	array.sweep_voc[arrayVocLastSweep.0]
Array: Sweep Pmax	MIB: TRISTAR-MPPT Description:Pmax (last sweep) Scaling Factor:1.0 Units:W Range:[-10, 5000] Modbus address:0x003c	SNMP agent	array.sweep_pmax[arrayPmaxLastSweep.0]
Battery: Charge State	MIB: TRISTAR-MPPT Description:Charge State Modbus address:0x0032 0: Start 1: NightCheck 2: Disconnect 3: Night 4: Fault 5: Mppt 6: Absorption 7: Float 8: Equalize 9: Slave 10: Fixed	SNMP agent	charge.state[chargeState.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Battery Voltage discovery	MIB: TRISTAR-MPPT Description:Battery voltage Scaling Factor:1.0 Units:V Range:[-10, 80] Modbus address:0x0018	SNMP agent	battery.voltage.discovery[batteryVoltage.0]
Battery: Target Voltage	MIB: TRISTAR-MPPT Description:Target Voltage Scaling Factor:1.0 Units:V Range:[-10, 650.0] Modbus address:0x0033	SNMP agent	target.voltage[targetRegulationVoltage.0] Preprocessing Discard unchanged with heartbeat: `1h`
Battery: Charge Current	MIB: TRISTAR-MPPT Description:Battery Current Scaling Factor:1.0 Units:A Range:[-10, 80] Modbus address:0x001c	SNMP agent	charge.current[batteryCurrent.0]
Battery: Output Power	MIB: TRISTAR-MPPT Description:Output Power Scaling Factor:1.0 Units:W Range:[-10, 4000] Modbus address:0x003a	SNMP agent	charge.output_power[ outputPower.0]
Temperature: Battery	MIB: TRISTAR-MPPT Description:Batt. Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0025	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR-MPPT Description:HS Temp Scaling Factor:1.0 Units:C Range:[-40, 80] Modbus address:0x0023	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Counter: Charge Amp-hours	MIB: TRISTAR-MPPT Description:Ah Charge Resettable Scaling Factor:1.0 Units:Ah Range:[0.0, 5000] Modbus addresses:H=0x0034 L=0x0035	SNMP agent	counter.charge_amp_hours[ahChargeResetable.0]
Counter: Charge KW-hours	MIB: TRISTAR-MPPT Description:kWh Charge Resettable Scaling Factor:1.0 Units:kWh Range:[0.0, 65535.0] Modbus address:0x0038	SNMP agent	counter.charge_kw_hours[kwhChargeResetable.0]
Status: Faults	MIB: TRISTAR-MPPT Description:Faults Modbus addresses:H=0x002c L=0x002d	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR-MPPT Description:Alarms Modbus addresses:H=0x002e L=0x002f	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar MPPT 600V by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar MPPT 600V by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Battery: Device charge in warning state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar TriStar MPPT 600V by SNMP/charge.state[chargeState.0])={$CHARGE.STATE.CRIT}`	High
Temperature: Low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar TriStar MPPT 600V by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "fetShort" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fetShort")=2`	High
Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Status: Device has "batteryHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryHvd")=2`	High
Status: Device has "arrayHvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","arrayHvd")=2`	High
Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Status: Device has "eepromRetryLimit" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","eepromRetryLimit")=2`	High
Status: Device has "controllerWasReset" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","controllerWasReset")=2`	High
Status: Device has "chargeSlaveControlTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","chargeSlaveControlTimeout")=2`	High
Status: Device has "rs232SerialToMeterBridge" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","rs232SerialToMeterBridge")=2`	High
Status: Device has "batteryLvd" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","batteryLvd")=2`	High
Status: Device has "powerboardCommunicationFault" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","powerboardCommunicationFault")=2`	High
Status: Device has "fault16Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault16Software")=2`	High
Status: Device has "fault17Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault17Software")=2`	High
Status: Device has "fault18Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault18Software")=2`	High
Status: Device has "fault19Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault19Software")=2`	High
Status: Device has "fault20Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault20Software")=2`	High
Status: Device has "fault21Software" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fault21Software")=2`	High
Status: Device has "fpgaVersion" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","fpgaVersion")=2`	High
Status: Device has "currentSensorReferenceOutOfRange" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","currentSensorReferenceOutOfRange")=2`	High
Status: Device has "ia-refSlaveModeTimeout" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","ia-refSlaveModeTimeout")=2`	High
Status: Device has "blockbusBoot" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","blockbusBoot")=2`	High
Status: Device has "hscommMaster" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscommMaster")=2`	High
Status: Device has "hscomm" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","hscomm")=2`	High
Status: Device has "slave" faults flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.faults[faults.0],#3,"like","slave")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "highTemperatureCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highTemperatureCurrentLimit")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageOutOfRange")=2`	Warning
Status: Device has "highArrayVCurrentLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","highArrayVCurrentLimit")=2`	Warning
Status: Device has "maxAdcValueReached" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","maxAdcValueReached")=2`	Warning
Status: Device has "controllerWasReset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","controllerWasReset")=2`	Warning
Status: Device has "alarm21Internal" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","alarm21Internal")=2`	Warning
Status: Device has "p3VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","p3VoltageOutOfRange")=2`	Warning
Status: Device has "derateLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","derateLimit")=2`	Warning
Status: Device has "arrayCurrentOffset" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","arrayCurrentOffset")=2`	Warning
Status: Device has "ee-i2cRetryLimit" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ee-i2cRetryLimit")=2`	Warning
Status: Device has "ethernetAlarm" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","ethernetAlarm")=2`	Warning
Status: Device has "lvd" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","lvd")=2`	Warning
Status: Device has "software" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","software")=2`	Warning
Status: Device has "fp12VoltageOutOfRange" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","fp12VoltageOutOfRange")=2`	Warning
Status: Device has "extflashFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","extflashFault")=2`	Warning
Status: Device has "slaveControlFault" alarm flag		`count(/Morningstar TriStar MPPT 600V by SNMP/status.alarms[alarms.0],#3,"like","slaveControlFault")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name

Description

Type

Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR-MPPT

Description:Battery voltage

Scaling Factor:1.0

Units:V

Range:[-10, 80]

Modbus address:0x0018

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar TriStar MPPT 600V by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_pwm_snmp

Morningstar TriStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.4 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Status: Control Mode	MIB: TRISTAR Description:Control Mode Modbus address:0x001A 0: charge 1: loadControl 2: diversion 3: lighting	SNMP agent	control.mode[controlMode.0]
Counter: KW-hours	MIB: TRISTAR Description:Kilowatt Hours Scaling Factor:1.0 Units:kWh Range:[0.0, 5000.0] Modbus address:0x001E	SNMP agent	counter.charge_kw_hours[kilowattHours.0] Preprocessing Custom multiplier: `0.001` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Counter: Amp-hours	MIB: TRISTAR Description:Ah (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 50000.0] Modbus addresses:H=0x0011 L=0x0012	SNMP agent	counter.charge_amp_hours[ahResettable.0] Preprocessing Custom multiplier: `0.1`
Battery: Battery Voltage discovery	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.002950042725`
Temperature: Battery	MIB: TRISTAR Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000F	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR Description:Alarms Modbus addresses:H=0x001D L=0x0017	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar PWM: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar PWM: Temperature: Low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Temperature: Critically low battery temperature
Morningstar TriStar PWM: Temperature: Critically low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar PWM: Temperature: High battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Temperature: Critically high battery temperature
Morningstar TriStar PWM: Temperature: Critically high battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar PWM: Status: Device has "externalShort" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","externalShort")=2`	High
Morningstar TriStar PWM: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar PWM: Status: Device has "mosfetSShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar TriStar PWM: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar PWM: Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Morningstar TriStar PWM: Status: Device has "tristarHot" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","tristarHot")=2`	High
Morningstar TriStar PWM: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar PWM: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar PWM: Status: Device has "reset" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Morningstar TriStar PWM: Status: Device has "systemMiswire" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","systemMiswire")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar PWM: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar PWM: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar PWM: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar PWM: Status: Device has "tristarHot" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","tristarHot")=2`	Warning
Morningstar TriStar PWM: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar PWM: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar PWM: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar PWM: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar PWM: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar PWM: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar PWM: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar PWM: Status: Device has "diversionLoadNearMax" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","diversionLoadNearMax")=2`	Warning
Morningstar TriStar PWM: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar PWM: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar PWM: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar TriStar PWM: Status: Device has "loadDisconnectState" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadDisconnectState")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Battery voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0008

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Battery: Low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Critically low battery voltage
Morningstar TriStar PWM: Battery: Critically low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar PWM: Battery: High battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Critically high battery voltage
Morningstar TriStar PWM: Battery: Critically high battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

LLD rule Charge mode discovery

Name Description Type Key and additional info

Charge mode discovery

Discovery for device in charge mode

Dependent item

controlmode.charge.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge mode discovery

Name Description Type Key and additional info

Array: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

array.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Battery: Charge Current{#SINGLETON}

MIB: TRISTAR

Description:Charge Current

Scaling Factor:0.002034515380859375

Units:A

Range:[0, 60]

Modbus address:0x000B

SNMP agent

charge.current[chargeCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002034515381
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Load mode discovery

Name Description Type Key and additional info

Load mode discovery

Discovery for device in load mode

Dependent item

controlmode.load.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load mode discovery

Name Description Type Key and additional info

Load: State{#SINGLETON}

MIB: TRISTAR

Description:Load State

Modbus address:0x001B

0: Start

1: Normal

2: LvdWarning

3: Lvd

4: Fault

5: Disconnect

6: LvdWarning1

7: OverrideLvd

8: Equalize

SNMP agent

load.state[loadState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Trigger prototypes for Load mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Load: Device load in warning state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar TriStar PWM: Load: Device load in critical state
Morningstar TriStar PWM: Load: Device load in critical state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"fault"}`	High

LLD rule Diversion mode discovery

Name Description Type Key and additional info

Diversion mode discovery

Discovery for device in diversion mode

Dependent item

controlmode.diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Diversion mode discovery

Name Description Type Key and additional info

Load: PWM Duty Cycle{#SINGLETON}

MIB: TRISTAR

Description:PWM Duty Cycle

Scaling Factor:0.392156862745098

Units:%

Range:[0.0, 100.0]

Modbus address:0x001C

SNMP agent

diversion.pwm_duty_cycle[pwmDutyCycle.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.3921568627
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Charge + Diversion mode discovery

Name Description Type Key and additional info

Charge + Diversion mode discovery

Discovery for device in charge and diversion modes

Dependent item

controlmode.charge_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge + Diversion mode discovery

Name Description Type Key and additional info

Battery: Charge State{#SINGLETON}

MIB: TRISTAR

Description:Control State

Modbus address:0x001B

SNMP agent

charge.state[controlState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Battery: Target Voltage{#SINGLETON}

MIB: TRISTAR

Description:Target Regulation Voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0010

SNMP agent

target.voltage[targetVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Charge + Diversion mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Battery: Device charge in warning state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Device charge in critical state
Morningstar TriStar PWM: Battery: Device charge in critical state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.CRIT}`	High

LLD rule Load + Diversion mode discovery

Name Description Type Key and additional info

Load + Diversion mode discovery

Discovery for device in load and diversion modes

Dependent item

controlmode.load_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load + Diversion mode discovery

Name Description Type Key and additional info

Load: Current{#SINGLETON}

MIB: TRISTAR

Description:Load Current

Scaling Factor:0.00966400146484375

Units:A

Range:[0, 60]

Modbus address:0x000C

SNMP agent

load.current[loadCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.009664001465
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Load: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

load.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_pwm_snmp

Morningstar TriStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.2 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Status: Control Mode	MIB: TRISTAR Description:Control Mode Modbus address:0x001A 0: charge 1: loadControl 2: diversion 3: lighting	SNMP agent	control.mode[controlMode.0]
Counter: KW-hours	MIB: TRISTAR Description:Kilowatt Hours Scaling Factor:1.0 Units:kWh Range:[0.0, 5000.0] Modbus address:0x001E	SNMP agent	counter.charge_kw_hours[kilowattHours.0] Preprocessing Custom multiplier: `0.001` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Counter: Amp-hours	MIB: TRISTAR Description:Ah (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 50000.0] Modbus addresses:H=0x0011 L=0x0012	SNMP agent	counter.charge_amp_hours[ahResettable.0] Preprocessing Custom multiplier: `0.1`
Battery: Battery Voltage discovery	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.002950042725`
Temperature: Battery	MIB: TRISTAR Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000F	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR Description:Alarms Modbus addresses:H=0x001D L=0x0017	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar PWM: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar PWM: Temperature: Low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Temperature: Critically low battery temperature
Morningstar TriStar PWM: Temperature: Critically low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar PWM: Temperature: High battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Temperature: Critically high battery temperature
Morningstar TriStar PWM: Temperature: Critically high battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar PWM: Status: Device has "externalShort" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","externalShort")=2`	High
Morningstar TriStar PWM: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar PWM: Status: Device has "mosfetSShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar TriStar PWM: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar PWM: Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Morningstar TriStar PWM: Status: Device has "tristarHot" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","tristarHot")=2`	High
Morningstar TriStar PWM: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar PWM: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar PWM: Status: Device has "reset" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Morningstar TriStar PWM: Status: Device has "systemMiswire" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","systemMiswire")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar PWM: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar PWM: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar PWM: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar PWM: Status: Device has "tristarHot" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","tristarHot")=2`	Warning
Morningstar TriStar PWM: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar PWM: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar PWM: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar PWM: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar PWM: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar PWM: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar PWM: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar PWM: Status: Device has "diversionLoadNearMax" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","diversionLoadNearMax")=2`	Warning
Morningstar TriStar PWM: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar PWM: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar PWM: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar TriStar PWM: Status: Device has "loadDisconnectState" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadDisconnectState")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Battery voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0008

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Battery: Low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Critically low battery voltage
Morningstar TriStar PWM: Battery: Critically low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar PWM: Battery: High battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Critically high battery voltage
Morningstar TriStar PWM: Battery: Critically high battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

LLD rule Charge mode discovery

Name Description Type Key and additional info

Charge mode discovery

Discovery for device in charge mode

Dependent item

controlmode.charge.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge mode discovery

Name Description Type Key and additional info

Array: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

array.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Battery: Charge Current{#SINGLETON}

MIB: TRISTAR

Description:Charge Current

Scaling Factor:0.002034515380859375

Units:A

Range:[0, 60]

Modbus address:0x000B

SNMP agent

charge.current[chargeCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002034515381
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Load mode discovery

Name Description Type Key and additional info

Load mode discovery

Discovery for device in load mode

Dependent item

controlmode.load.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load mode discovery

Name Description Type Key and additional info

Load: State{#SINGLETON}

MIB: TRISTAR

Description:Load State

Modbus address:0x001B

0: Start

1: Normal

2: LvdWarning

3: Lvd

4: Fault

5: Disconnect

6: LvdWarning1

7: OverrideLvd

8: Equalize

SNMP agent

load.state[loadState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Trigger prototypes for Load mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Load: Device load in warning state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar TriStar PWM: Load: Device load in critical state
Morningstar TriStar PWM: Load: Device load in critical state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"fault"}`	High

LLD rule Diversion mode discovery

Name Description Type Key and additional info

Diversion mode discovery

Discovery for device in diversion mode

Dependent item

controlmode.diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Diversion mode discovery

Name Description Type Key and additional info

Load: PWM Duty Cycle{#SINGLETON}

MIB: TRISTAR

Description:PWM Duty Cycle

Scaling Factor:0.392156862745098

Units:%

Range:[0.0, 100.0]

Modbus address:0x001C

SNMP agent

diversion.pwm_duty_cycle[pwmDutyCycle.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.3921568627
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Charge + Diversion mode discovery

Name Description Type Key and additional info

Charge + Diversion mode discovery

Discovery for device in charge and diversion modes

Dependent item

controlmode.charge_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge + Diversion mode discovery

Name Description Type Key and additional info

Battery: Charge State{#SINGLETON}

MIB: TRISTAR

Description:Control State

Modbus address:0x001B

SNMP agent

charge.state[controlState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Battery: Target Voltage{#SINGLETON}

MIB: TRISTAR

Description:Target Regulation Voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0010

SNMP agent

target.voltage[targetVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Charge + Diversion mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Battery: Device charge in warning state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Device charge in critical state
Morningstar TriStar PWM: Battery: Device charge in critical state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.CRIT}`	High

LLD rule Load + Diversion mode discovery

Name Description Type Key and additional info

Load + Diversion mode discovery

Discovery for device in load and diversion modes

Dependent item

controlmode.load_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load + Diversion mode discovery

Name Description Type Key and additional info

Load: Current{#SINGLETON}

MIB: TRISTAR

Description:Load Current

Scaling Factor:0.00966400146484375

Units:A

Range:[0, 60]

Modbus address:0x000C

SNMP agent

load.current[loadCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.009664001465
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Load: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

load.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_pwm_snmp

Morningstar TriStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value: `any error` ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Status: Control Mode	MIB: TRISTAR Description:Control Mode Modbus address:0x001A 0: charge 1: loadControl 2: diversion 3: lighting	SNMP agent	control.mode[controlMode.0]
Counter: KW-hours	MIB: TRISTAR Description:Kilowatt Hours Scaling Factor:1.0 Units:kWh Range:[0.0, 5000.0] Modbus address:0x001E	SNMP agent	counter.charge_kw_hours[kilowattHours.0] Preprocessing Custom multiplier: `0.001` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Counter: Amp-hours	MIB: TRISTAR Description:Ah (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 50000.0] Modbus addresses:H=0x0011 L=0x0012	SNMP agent	counter.charge_amp_hours[ahResettable.0] Preprocessing Custom multiplier: `0.1`
Battery: Battery Voltage discovery	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.002950042725`
Temperature: Battery	MIB: TRISTAR Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000F	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR Description:Alarms Modbus addresses:H=0x001D L=0x0017	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Morningstar TriStar PWM: Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Morningstar TriStar PWM: Temperature: Low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Temperature: Critically low battery temperature
Morningstar TriStar PWM: Temperature: Critically low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Morningstar TriStar PWM: Temperature: High battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Temperature: Critically high battery temperature
Morningstar TriStar PWM: Temperature: Critically high battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Morningstar TriStar PWM: Status: Device has "externalShort" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","externalShort")=2`	High
Morningstar TriStar PWM: Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Morningstar TriStar PWM: Status: Device has "mosfetSShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","mosfetSShorted")=2`	High
Morningstar TriStar PWM: Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Morningstar TriStar PWM: Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Morningstar TriStar PWM: Status: Device has "tristarHot" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","tristarHot")=2`	High
Morningstar TriStar PWM: Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Morningstar TriStar PWM: Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Morningstar TriStar PWM: Status: Device has "reset" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Morningstar TriStar PWM: Status: Device has "systemMiswire" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","systemMiswire")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Morningstar TriStar PWM: Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Morningstar TriStar PWM: Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Morningstar TriStar PWM: Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Morningstar TriStar PWM: Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Morningstar TriStar PWM: Status: Device has "tristarHot" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","tristarHot")=2`	Warning
Morningstar TriStar PWM: Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Morningstar TriStar PWM: Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Morningstar TriStar PWM: Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Morningstar TriStar PWM: Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Morningstar TriStar PWM: Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Morningstar TriStar PWM: Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Morningstar TriStar PWM: Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Morningstar TriStar PWM: Status: Device has "diversionLoadNearMax" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","diversionLoadNearMax")=2`	Warning
Morningstar TriStar PWM: Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Morningstar TriStar PWM: Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Morningstar TriStar PWM: Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Morningstar TriStar PWM: Status: Device has "loadDisconnectState" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadDisconnectState")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Battery voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0008

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Battery: Low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Critically low battery voltage
Morningstar TriStar PWM: Battery: Critically low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Morningstar TriStar PWM: Battery: High battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Critically high battery voltage
Morningstar TriStar PWM: Battery: Critically high battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

LLD rule Charge mode discovery

Name Description Type Key and additional info

Charge mode discovery

Discovery for device in charge mode

Dependent item

controlmode.charge.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge mode discovery

Name Description Type Key and additional info

Array: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

array.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Battery: Charge Current{#SINGLETON}

MIB: TRISTAR

Description:Charge Current

Scaling Factor:0.002034515380859375

Units:A

Range:[0, 60]

Modbus address:0x000B

SNMP agent

charge.current[chargeCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002034515381
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Load mode discovery

Name Description Type Key and additional info

Load mode discovery

Discovery for device in load mode

Dependent item

controlmode.load.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load mode discovery

Name Description Type Key and additional info

Load: State{#SINGLETON}

MIB: TRISTAR

Description:Load State

Modbus address:0x001B

0: Start

1: Normal

2: LvdWarning

3: Lvd

4: Fault

5: Disconnect

6: LvdWarning1

7: OverrideLvd

8: Equalize

SNMP agent

load.state[loadState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Trigger prototypes for Load mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Load: Device load in warning state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Morningstar TriStar PWM: Load: Device load in critical state
Morningstar TriStar PWM: Load: Device load in critical state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"fault"}`	High

LLD rule Diversion mode discovery

Name Description Type Key and additional info

Diversion mode discovery

Discovery for device in diversion mode

Dependent item

controlmode.diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Diversion mode discovery

Name Description Type Key and additional info

Load: PWM Duty Cycle{#SINGLETON}

MIB: TRISTAR

Description:PWM Duty Cycle

Scaling Factor:0.392156862745098

Units:%

Range:[0.0, 100.0]

Modbus address:0x001C

SNMP agent

diversion.pwm_duty_cycle[pwmDutyCycle.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.3921568627
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Charge + Diversion mode discovery

Name Description Type Key and additional info

Charge + Diversion mode discovery

Discovery for device in charge and diversion modes

Dependent item

controlmode.charge_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge + Diversion mode discovery

Name Description Type Key and additional info

Battery: Charge State{#SINGLETON}

MIB: TRISTAR

Description:Control State

Modbus address:0x001B

SNMP agent

charge.state[controlState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Battery: Target Voltage{#SINGLETON}

MIB: TRISTAR

Description:Target Regulation Voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0010

SNMP agent

target.voltage[targetVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Charge + Diversion mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Morningstar TriStar PWM: Battery: Device charge in warning state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.WARN}`	Warning	Depends on: Morningstar TriStar PWM: Battery: Device charge in critical state
Morningstar TriStar PWM: Battery: Device charge in critical state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.CRIT}`	High

LLD rule Load + Diversion mode discovery

Name Description Type Key and additional info

Load + Diversion mode discovery

Discovery for device in load and diversion modes

Dependent item

controlmode.load_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load + Diversion mode discovery

Name Description Type Key and additional info

Load: Current{#SINGLETON}

MIB: TRISTAR

Description:Load Current

Scaling Factor:0.00966400146484375

Units:A

Range:[0, 60]

Modbus address:0x000C

SNMP agent

load.current[loadCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.009664001465
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Load: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

load.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_pwm_snmp

Morningstar TriStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.4 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Status: Control Mode	MIB: TRISTAR Description:Control Mode Modbus address:0x001A 0: charge 1: loadControl 2: diversion 3: lighting	SNMP agent	control.mode[controlMode.0]
Counter: KW-hours	MIB: TRISTAR Description:Kilowatt Hours Scaling Factor:1.0 Units:kWh Range:[0.0, 5000.0] Modbus address:0x001E	SNMP agent	counter.charge_kw_hours[kilowattHours.0] Preprocessing Custom multiplier: `0.001` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Counter: Amp-hours	MIB: TRISTAR Description:Ah (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 50000.0] Modbus addresses:H=0x0011 L=0x0012	SNMP agent	counter.charge_amp_hours[ahResettable.0] Preprocessing Custom multiplier: `0.1`
Battery: Battery Voltage discovery	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.002950042725`
Temperature: Battery	MIB: TRISTAR Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000F	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR Description:Alarms Modbus addresses:H=0x001D L=0x0017	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Temperature: Low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "externalShort" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","externalShort")=2`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Status: Device has "tristarHot" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","tristarHot")=2`	High
Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "reset" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Status: Device has "systemMiswire" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","systemMiswire")=2`	High
Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "tristarHot" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","tristarHot")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Status: Device has "diversionLoadNearMax" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","diversionLoadNearMax")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Status: Device has "loadDisconnectState" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadDisconnectState")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Battery voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0008

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

LLD rule Charge mode discovery

Name Description Type Key and additional info

Charge mode discovery

Discovery for device in charge mode

Dependent item

controlmode.charge.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge mode discovery

Name Description Type Key and additional info

Array: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

array.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Battery: Charge Current{#SINGLETON}

MIB: TRISTAR

Description:Charge Current

Scaling Factor:0.002034515380859375

Units:A

Range:[0, 60]

Modbus address:0x000B

SNMP agent

charge.current[chargeCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002034515381
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Load mode discovery

Name Description Type Key and additional info

Load mode discovery

Discovery for device in load mode

Dependent item

controlmode.load.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load mode discovery

Name Description Type Key and additional info

Load: State{#SINGLETON}

MIB: TRISTAR

Description:Load State

Modbus address:0x001B

0: Start

1: Normal

2: LvdWarning

3: Lvd

4: Fault

5: Disconnect

6: LvdWarning1

7: OverrideLvd

8: Equalize

SNMP agent

load.state[loadState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Trigger prototypes for Load mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Load: Device load in warning state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"fault"}`	High

LLD rule Diversion mode discovery

Name Description Type Key and additional info

Diversion mode discovery

Discovery for device in diversion mode

Dependent item

controlmode.diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Diversion mode discovery

Name Description Type Key and additional info

Load: PWM Duty Cycle{#SINGLETON}

MIB: TRISTAR

Description:PWM Duty Cycle

Scaling Factor:0.392156862745098

Units:%

Range:[0.0, 100.0]

Modbus address:0x001C

SNMP agent

diversion.pwm_duty_cycle[pwmDutyCycle.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.3921568627
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Charge + Diversion mode discovery

Name Description Type Key and additional info

Charge + Diversion mode discovery

Discovery for device in charge and diversion modes

Dependent item

controlmode.charge_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge + Diversion mode discovery

Name Description Type Key and additional info

Battery: Charge State{#SINGLETON}

MIB: TRISTAR

Description:Control State

Modbus address:0x001B

SNMP agent

charge.state[controlState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Battery: Target Voltage{#SINGLETON}

MIB: TRISTAR

Description:Target Regulation Voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0010

SNMP agent

target.voltage[targetVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Charge + Diversion mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.CRIT}`	High

LLD rule Load + Diversion mode discovery

Name Description Type Key and additional info

Load + Diversion mode discovery

Discovery for device in load and diversion modes

Dependent item

controlmode.load_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load + Diversion mode discovery

Name Description Type Key and additional info

Load: Current{#SINGLETON}

MIB: TRISTAR

Description:Load Current

Scaling Factor:0.00966400146484375

Units:A

Range:[0, 60]

Modbus address:0x000C

SNMP agent

load.current[loadCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.009664001465
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Load: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

load.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_pwm_snmp

Morningstar TriStar PWM by SNMP

Overview

For Zabbix version: 6.2 and higher.

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$CHARGE.STATE.CRIT}	fault	`4`
{$CHARGE.STATE.WARN}	disconnect	`2`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$VOLTAGE.MAX.CRIT}	-	``
{$VOLTAGE.MAX.WARN}	-	``
{$VOLTAGE.MIN.CRIT}	-	``
{$VOLTAGE.MIN.WARN}	-	``

Template links

There are no template links in this template.

Discovery rules

Name	Description	Type	Key and additional info
Battery voltage discovery	Discovery for battery voltage triggers	DEPENDENT	battery.voltage.discovery Preprocessing: - JAVASCRIPT: `The text is too long. Please see the template.`
Charge + Diversion mode discovery	Discovery for device in charge and diversion modes	DEPENDENT	controlmode.charge_diversion.discovery Preprocessing: - JAVASCRIPT: `The text is too long. Please see the template.`
Charge mode discovery	Discovery for device in charge mode	DEPENDENT	controlmode.charge.discovery Preprocessing: - JAVASCRIPT: `return JSON.stringify(parseInt(value) === 0 ? [{'{#SINGLETON}': ''}] : []);`
Diversion mode discovery	Discovery for device in diversion mode	DEPENDENT	controlmode.diversion.discovery Preprocessing: - JAVASCRIPT: `return JSON.stringify(parseInt(value) === 2 ? [{'{#SINGLETON}': ''}] : []);`
Load + Diversion mode discovery	Discovery for device in load and diversion modes	DEPENDENT	controlmode.load_diversion.discovery Preprocessing: - JAVASCRIPT: `The text is too long. Please see the template.`
Load mode discovery	Discovery for device in load mode	DEPENDENT	controlmode.load.discovery Preprocessing: - JAVASCRIPT: `return JSON.stringify(parseInt(value) === 1 ? [{'{#SINGLETON}': ''}] : []);`

Items collected

Group	Name	Description	Type	Key and additional info
Array	Array: Voltage{#SINGLETON}	MIB: TRISTAR Description:Array/Load Voltage Scaling Factor:0.00424652099609375 Units:V Range:[0, 80] Modbus address:0x000A	SNMP	array.voltage[arrayloadVoltage.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.004246520996` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Voltage{#SINGLETON}	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP	battery.voltage[batteryVoltage.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.002950042725` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Charge Current{#SINGLETON}	MIB: TRISTAR Description:Charge Current Scaling Factor:0.002034515380859375 Units:A Range:[0, 60] Modbus address:0x000B	SNMP	charge.current[chargeCurrent.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.002034515381` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Battery	Battery: Charge State{#SINGLETON}	MIB: TRISTAR Description:Control State Modbus address:0x001B	SNMP	charge.state[controlState.0{#SINGLETON}] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Battery	Battery: Target Voltage{#SINGLETON}	MIB: TRISTAR Description:Target Regulation Voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0010	SNMP	target.voltage[targetVoltage.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.002950042725` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Counter	Counter: KW-hours	MIB: TRISTAR Description:Kilowatt Hours Scaling Factor:1.0 Units:kWh Range:[0.0, 5000.0] Modbus address:0x001E	SNMP	counter.charge_kw_hours[kilowattHours.0] Preprocessing: - MULTIPLIER: `0.001` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Counter	Counter: Amp-hours	MIB: TRISTAR Description:Ah (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 50000.0] Modbus addresses:H=0x0011 L=0x0012	SNMP	counter.charge_amp_hours[ahResettable.0] Preprocessing: - MULTIPLIER: `0.1`
Load	Load: State{#SINGLETON}	MIB: TRISTAR Description:Load State Modbus address:0x001B 0: Start 1: Normal 2: LvdWarning 3: Lvd 4: Fault 5: Disconnect 6: LvdWarning1 7: OverrideLvd 8: Equalize	SNMP	load.state[loadState.0{#SINGLETON}] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h`
Load	Load: PWM Duty Cycle{#SINGLETON}	MIB: TRISTAR Description:PWM Duty Cycle Scaling Factor:0.392156862745098 Units:% Range:[0.0, 100.0] Modbus address:0x001C	SNMP	diversion.pwm_duty_cycle[pwmDutyCycle.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.3921568627` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Load	Load: Current{#SINGLETON}	MIB: TRISTAR Description:Load Current Scaling Factor:0.00966400146484375 Units:A Range:[0, 60] Modbus address:0x000C	SNMP	load.current[loadCurrent.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.009664001465` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Load	Load: Voltage{#SINGLETON}	MIB: TRISTAR Description:Array/Load Voltage Scaling Factor:0.00424652099609375 Units:V Range:[0, 80] Modbus address:0x000A	SNMP	load.voltage[arrayloadVoltage.0{#SINGLETON}] Preprocessing: - MULTIPLIER: `0.004246520996` - REGEX: `^(\d+)(\.\d{1,2})? \1\2`
Status	Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP	status.net.uptime Preprocessing: - MULTIPLIER: `0.01`
Status	Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP	status.hw.uptime Preprocessing: - CHECK_NOT_SUPPORTED ⛔️ON_FAIL: `CUSTOM_VALUE -> 0` - MULTIPLIER: `0.01`
Status	Status: Control Mode	MIB: TRISTAR Description:Control Mode Modbus address:0x001A 0: charge 1: loadControl 2: diversion 3: lighting	SNMP	control.mode[controlMode.0]
Status	Status: Faults	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP	status.faults[faults.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Status	Status: Alarms	MIB: TRISTAR Description:Alarms Modbus addresses:H=0x001D L=0x0017	SNMP	status.alarms[alarms.0] Preprocessing: - DISCARD_UNCHANGED_HEARTBEAT: `1h` - JAVASCRIPT: `The text is too long. Please see the template.`
Temperature	Temperature: Battery	MIB: TRISTAR Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000F	SNMP	temp.battery[batteryTemperature.0]
Temperature	Temperature: Heatsink	MIB: TRISTAR Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000E	SNMP	temp.heatsink[heatsinkTemperature.0]
Zabbix raw items	Battery: Battery Voltage discovery	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP	battery.voltage.discovery[batteryVoltage.0] Preprocessing: - MULTIPLIER: `0.002950042725`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	-	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	WARNING	Depends on: - Battery: Critically low battery voltage
Battery: Critically low battery voltage	-	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	HIGH
Battery: High battery voltage	-	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	WARNING	Depends on: - Battery: Critically high battery voltage
Battery: Critically high battery voltage	-	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	HIGH
Battery: Device charge in warning state	-	`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.WARN}`	WARNING	Depends on: - Battery: Device charge in critical state
Battery: Device charge in critical state	-	`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.CRIT}`	HIGH
Load: Device load in warning state	-	`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"override"}`	WARNING	Depends on: - Load: Device load in critical state
Load: Device load in critical state	-	`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"fault"}`	HIGH
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar PWM by SNMP/status.net.uptime)<10m)`	INFO	Manual close: YES
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar PWM by SNMP/status.net.uptime,5m)=1`	WARNING	Manual close: YES
Status: Device has "externalShort" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","externalShort")=2`	HIGH
Status: Device has "overcurrent" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	HIGH
Status: Device has "mosfetSShorted" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","mosfetSShorted")=2`	HIGH
Status: Device has "softwareFault" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	HIGH
Status: Device has "highVoltageDisconnect" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	HIGH
Status: Device has "tristarHot" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","tristarHot")=2`	HIGH
Status: Device has "dipSwitchChange" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	HIGH
Status: Device has "customSettingsEdit" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	HIGH
Status: Device has "reset" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","reset")=2`	HIGH
Status: Device has "systemMiswire" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","systemMiswire")=2`	HIGH
Status: Device has "rtsShorted" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	HIGH
Status: Device has "rtsDisconnected" faults flag	-	`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	HIGH
Status: Device has "rtsShorted" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	WARNING
Status: Device has "rtsDisconnected" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	WARNING
Status: Device has "heatsinkTempSensorOpen" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	WARNING
Status: Device has "heatsinkTempSensorShorted" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	WARNING
Status: Device has "tristarHot" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","tristarHot")=2`	WARNING
Status: Device has "currentLimit" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	WARNING
Status: Device has "currentOffset" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	WARNING
Status: Device has "batterySense" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	WARNING
Status: Device has "batterySenseDisconnected" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	WARNING
Status: Device has "uncalibrated" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	WARNING
Status: Device has "rtsMiswire" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	WARNING
Status: Device has "highVoltageDisconnect" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	WARNING
Status: Device has "diversionLoadNearMax" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","diversionLoadNearMax")=2`	WARNING
Status: Device has "systemMiswire" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	WARNING
Status: Device has "mosfetSOpen" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	WARNING
Status: Device has "p12VoltageReferenceOff" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	WARNING
Status: Device has "loadDisconnectState" alarm flag	-	`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadDisconnectState")=2`	WARNING
Temperature: Low battery temperature	-	`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	WARNING	Depends on: - Temperature: Critically low battery temperature
Temperature: Critically low battery temperature	-	`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	HIGH
Temperature: High battery temperature	-	`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	WARNING	Depends on: - Temperature: Critically high battery temperature
Temperature: Critically high battery temperature	-	`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	HIGH

Feedback

Please report any issues with the template at https://support.zabbix.com.

Zabbix version 7.4 7.2 7.0 6.4 6.2 6.0

Source: templates/net/morningstar/morningstar_tristar_pwm_snmp

Morningstar TriStar PWM by SNMP

Overview

This template is designed for the effortless deployment of Morningstar TriStar PWM monitoring by Zabbix via SNMP and doesn't require any external scripts.

Requirements

Zabbix version: 6.0 and higher.

Tested versions

This template has been tested on:

Morningstar TriStar PWM

Configuration

Setup

Refer to the vendor documentation.

Macros used

Name	Description	Default
{$BATTERY.TEMP.MIN.WARN}	Battery low temperature warning value	`0`
{$BATTERY.TEMP.MAX.WARN}	Battery high temperature warning value	`45`
{$BATTERY.TEMP.MIN.CRIT}	Battery low temperature critical value	`-20`
{$BATTERY.TEMP.MAX.CRIT}	Battery high temperature critical value	`60`
{$VOLTAGE.MIN.WARN}
{$VOLTAGE.MAX.WARN}
{$VOLTAGE.MIN.CRIT}
{$VOLTAGE.MAX.CRIT}
{$CHARGE.STATE.WARN}	disconnect	`2`
{$CHARGE.STATE.CRIT}	fault	`4`
{$LOAD.STATE.WARN:"lvdWarning"}	lvdWarning	`2`
{$LOAD.STATE.WARN:"disconnect"}	disconnect	`5`
{$LOAD.STATE.WARN:"override"}	override	`7`
{$LOAD.STATE.CRIT:"lvd"}	lvd	`3`
{$LOAD.STATE.CRIT:"fault"}	fault	`4`

Items

Name	Description	Type	Key and additional info
Status: Uptime (network)	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.	SNMP agent	status.net.uptime Preprocessing Custom multiplier: `0.01`
Status: Uptime (hardware)	The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.	SNMP agent	status.hw.uptime Preprocessing Check for not supported value ⛔️Custom on fail: Set value to: `0` Custom multiplier: `0.01`
Status: Control Mode	MIB: TRISTAR Description:Control Mode Modbus address:0x001A 0: charge 1: loadControl 2: diversion 3: lighting	SNMP agent	control.mode[controlMode.0]
Counter: KW-hours	MIB: TRISTAR Description:Kilowatt Hours Scaling Factor:1.0 Units:kWh Range:[0.0, 5000.0] Modbus address:0x001E	SNMP agent	counter.charge_kw_hours[kilowattHours.0] Preprocessing Custom multiplier: `0.001` Regular expression: `^(\d+)(\.\d{1,2})? \1\2`
Counter: Amp-hours	MIB: TRISTAR Description:Ah (Resettable) Scaling Factor:0.1 Units:Ah Range:[0.0, 50000.0] Modbus addresses:H=0x0011 L=0x0012	SNMP agent	counter.charge_amp_hours[ahResettable.0] Preprocessing Custom multiplier: `0.1`
Battery: Battery Voltage discovery	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	battery.voltage.discovery[batteryVoltage.0] Preprocessing Custom multiplier: `0.002950042725`
Temperature: Battery	MIB: TRISTAR Description:Battery Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000F	SNMP agent	temp.battery[batteryTemperature.0]
Temperature: Heatsink	MIB: TRISTAR Description:Heatsink Temperature Scaling Factor:1.0 Units:deg C Range:[-40, 120] Modbus address:0x000E	SNMP agent	temp.heatsink[heatsinkTemperature.0]
Status: Faults	MIB: TRISTAR Description:Battery voltage Scaling Factor:0.002950042724609375 Units:V Range:[0.0, 80.0] Modbus address:0x0008	SNMP agent	status.faults[faults.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`
Status: Alarms	MIB: TRISTAR Description:Alarms Modbus addresses:H=0x001D L=0x0017	SNMP agent	status.alarms[alarms.0] Preprocessing Discard unchanged with heartbeat: `1h` JavaScript: `The text is too long. Please see the template.`

Triggers

Name	Description	Expression	Severity	Dependencies and additional info
Status: Device has been restarted	Uptime is less than 10 minutes.	`(last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)>0 and last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)<10m) or (last(/Morningstar TriStar PWM by SNMP/status.hw.uptime)=0 and last(/Morningstar TriStar PWM by SNMP/status.net.uptime)<10m)`	Info	Manual close: Yes
Status: Failed to fetch data	Zabbix has not received data for items for the last 5 minutes.	`nodata(/Morningstar TriStar PWM by SNMP/status.net.uptime,5m)=1`	Warning	Manual close: Yes
Temperature: Low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.WARN}`	Warning	Depends on: Temperature: Critically low battery temperature
Temperature: Critically low battery temperature		`max(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)<{$BATTERY.TEMP.MIN.CRIT}`	High
Temperature: High battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.WARN}`	Warning	Depends on: Temperature: Critically high battery temperature
Temperature: Critically high battery temperature		`min(/Morningstar TriStar PWM by SNMP/temp.battery[batteryTemperature.0],5m)>{$BATTERY.TEMP.MAX.CRIT}`	High
Status: Device has "externalShort" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","externalShort")=2`	High
Status: Device has "overcurrent" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","overcurrent")=2`	High
Status: Device has "mosfetSShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","mosfetSShorted")=2`	High
Status: Device has "softwareFault" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","softwareFault")=2`	High
Status: Device has "highVoltageDisconnect" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","highVoltageDisconnect")=2`	High
Status: Device has "tristarHot" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","tristarHot")=2`	High
Status: Device has "dipSwitchChange" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","dipSwitchChange")=2`	High
Status: Device has "customSettingsEdit" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","customSettingsEdit")=2`	High
Status: Device has "reset" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","reset")=2`	High
Status: Device has "systemMiswire" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","systemMiswire")=2`	High
Status: Device has "rtsShorted" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsShorted")=2`	High
Status: Device has "rtsDisconnected" faults flag		`count(/Morningstar TriStar PWM by SNMP/status.faults[faults.0],#3,"like","rtsDisconnected")=2`	High
Status: Device has "rtsShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsShorted")=2`	Warning
Status: Device has "rtsDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsDisconnected")=2`	Warning
Status: Device has "heatsinkTempSensorOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorOpen")=2`	Warning
Status: Device has "heatsinkTempSensorShorted" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","heatsinkTempSensorShorted")=2`	Warning
Status: Device has "tristarHot" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","tristarHot")=2`	Warning
Status: Device has "currentLimit" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentLimit")=2`	Warning
Status: Device has "currentOffset" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","currentOffset")=2`	Warning
Status: Device has "batterySense" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySense")=2`	Warning
Status: Device has "batterySenseDisconnected" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","batterySenseDisconnected")=2`	Warning
Status: Device has "uncalibrated" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","uncalibrated")=2`	Warning
Status: Device has "rtsMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","rtsMiswire")=2`	Warning
Status: Device has "highVoltageDisconnect" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","highVoltageDisconnect")=2`	Warning
Status: Device has "diversionLoadNearMax" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","diversionLoadNearMax")=2`	Warning
Status: Device has "systemMiswire" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","systemMiswire")=2`	Warning
Status: Device has "mosfetSOpen" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","mosfetSOpen")=2`	Warning
Status: Device has "p12VoltageReferenceOff" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","p12VoltageReferenceOff")=2`	Warning
Status: Device has "loadDisconnectState" alarm flag		`count(/Morningstar TriStar PWM by SNMP/status.alarms[alarms.0],#3,"like","loadDisconnectState")=2`	Warning

LLD rule Battery voltage discovery

Name Description Type Key and additional info

Battery voltage discovery

Discovery for battery voltage triggers

Dependent item

battery.voltage.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Battery voltage discovery

Name Description Type Key and additional info

Battery: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Battery voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0008

SNMP agent

battery.voltage[batteryVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Battery voltage discovery

Name	Expression	Severity	Dependencies and additional info
Battery: Low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.WARN}`	Warning	Depends on: Battery: Critically low battery voltage
Battery: Critically low battery voltage	`max(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)<{#VOLTAGE.MIN.CRIT}`	High
Battery: High battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.WARN}`	Warning	Depends on: Battery: Critically high battery voltage
Battery: Critically high battery voltage	`min(/Morningstar TriStar PWM by SNMP/battery.voltage[batteryVoltage.0{#SINGLETON}],5m)>{#VOLTAGE.MAX.CRIT}`	High

LLD rule Charge mode discovery

Name Description Type Key and additional info

Charge mode discovery

Discovery for device in charge mode

Dependent item

controlmode.charge.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge mode discovery

Name Description Type Key and additional info

Array: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

array.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Battery: Charge Current{#SINGLETON}

MIB: TRISTAR

Description:Charge Current

Scaling Factor:0.002034515380859375

Units:A

Range:[0, 60]

Modbus address:0x000B

SNMP agent

charge.current[chargeCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002034515381
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Load mode discovery

Name Description Type Key and additional info

Load mode discovery

Discovery for device in load mode

Dependent item

controlmode.load.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load mode discovery

Name Description Type Key and additional info

Load: State{#SINGLETON}

MIB: TRISTAR

Description:Load State

Modbus address:0x001B

0: Start

1: Normal

2: LvdWarning

3: Lvd

4: Fault

5: Disconnect

6: LvdWarning1

7: OverrideLvd

8: Equalize

SNMP agent

load.state[loadState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Trigger prototypes for Load mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Load: Device load in warning state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"lvdWarning"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.WARN:"override"}`	Warning	Depends on: Load: Device load in critical state
Load: Device load in critical state		`last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"lvd"} or last(/Morningstar TriStar PWM by SNMP/load.state[loadState.0{#SINGLETON}])={$LOAD.STATE.CRIT:"fault"}`	High

LLD rule Diversion mode discovery

Name Description Type Key and additional info

Diversion mode discovery

Discovery for device in diversion mode

Dependent item

controlmode.diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Diversion mode discovery

Name Description Type Key and additional info

Load: PWM Duty Cycle{#SINGLETON}

MIB: TRISTAR

Description:PWM Duty Cycle

Scaling Factor:0.392156862745098

Units:%

Range:[0.0, 100.0]

Modbus address:0x001C

SNMP agent

diversion.pwm_duty_cycle[pwmDutyCycle.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.3921568627
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

LLD rule Charge + Diversion mode discovery

Name Description Type Key and additional info

Charge + Diversion mode discovery

Discovery for device in charge and diversion modes

Dependent item

controlmode.charge_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Charge + Diversion mode discovery

Name Description Type Key and additional info

Battery: Charge State{#SINGLETON}

MIB: TRISTAR

Description:Control State

Modbus address:0x001B

SNMP agent

charge.state[controlState.0{#SINGLETON}]

Preprocessing

Discard unchanged with heartbeat: 1h

Battery: Target Voltage{#SINGLETON}

MIB: TRISTAR

Description:Target Regulation Voltage

Scaling Factor:0.002950042724609375

Units:V

Range:[0.0, 80.0]

Modbus address:0x0010

SNMP agent

target.voltage[targetVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.002950042725
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Trigger prototypes for Charge + Diversion mode discovery

Name	Description	Expression	Severity	Dependencies and additional info
Battery: Device charge in warning state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.WARN}`	Warning	Depends on: Battery: Device charge in critical state
Battery: Device charge in critical state		`last(/Morningstar TriStar PWM by SNMP/charge.state[controlState.0{#SINGLETON}])={$CHARGE.STATE.CRIT}`	High

LLD rule Load + Diversion mode discovery

Name Description Type Key and additional info

Load + Diversion mode discovery

Discovery for device in load and diversion modes

Dependent item

controlmode.load_diversion.discovery

Preprocessing

JavaScript: The text is too long. Please see the template.

Item prototypes for Load + Diversion mode discovery

Name Description Type Key and additional info

Load: Current{#SINGLETON}

MIB: TRISTAR

Description:Load Current

Scaling Factor:0.00966400146484375

Units:A

Range:[0, 60]

Modbus address:0x000C

SNMP agent

load.current[loadCurrent.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.009664001465
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Load: Voltage{#SINGLETON}

MIB: TRISTAR

Description:Array/Load Voltage

Scaling Factor:0.00424652099609375

Units:V

Range:[0, 80]

Modbus address:0x000A

SNMP agent

load.voltage[arrayloadVoltage.0{#SINGLETON}]

Preprocessing

Custom multiplier: 0.004246520996
Regular expression: ^(\d+)(\.\d{1,2})? \1\2

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Zabbix 7.4 - Less work. More depth.

Explore Zabbix Cloud with a free trial

Become a Zabbix Partner

Zabbix Academy is launched!

Join our global team!

Zabbix + Morningstar

Morningstar

Available solutions

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Zabbix set up

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Zabbix set up

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Zabbix set up

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Zabbix set up

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Zabbix set up

User guide to setting up Zabbix monitoring of the Morningstar products

Pre-requisites and installation

Zabbix set up

Morningstar ProStar MPPT by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Battery voltage discovery

Item prototypes for Battery voltage discovery

Trigger prototypes for Battery voltage discovery

Feedback

Morningstar ProStar MPPT by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Battery voltage discovery

Item prototypes for Battery voltage discovery

Trigger prototypes for Battery voltage discovery

Feedback

Morningstar ProStar MPPT by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Battery voltage discovery

Item prototypes for Battery voltage discovery

Trigger prototypes for Battery voltage discovery

Feedback

Morningstar ProStar MPPT by SNMP

Overview

Requirements

Tested versions

Configuration

Setup

Macros used

Items

Triggers

LLD rule Battery voltage discovery

Item prototypes for Battery voltage discovery

Trigger prototypes for Battery voltage discovery

Feedback

Morningstar ProStar MPPT by SNMP

Overview