Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/zyxel_snmp/zyxel_mes3500-10_snmp

ZYXEL MES3500-10 by SNMP

Overview

https://service-provider.zyxel.com/emea/en/products/carrier-and-access-switches/access-switches/mes3500-series

Known Issues

Description: Incorrect handling of SNMP bulk requests. Disable the use of bulk requests in the SNMP interface settings. Version: all versions firmware Device: ZYXEL MES3500-10

Requirements

Zabbix version: 7.0 and higher.

Tested versions

This template has been tested on:

  • ZYXEL MES3500-10 V4.00(AABB.4)b1_20180502 | 05/02/2018

Configuration

Zabbix should be configured according to the instructions in the Templates out of the box section.

Setup

Refer to the vendor documentation.

Macros used

Name Description Default
{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}

Triggers will be created only for interfaces whose description contains the value of this macro

CHANGE_IF_NEEDED
{$SNMP.TIMEOUT}

The time interval for SNMP agent availability trigger expression.

5m
{$CPU.UTIL.CRIT} 90
{$MEMORY.UTIL.MAX} 90
{$ZYXEL.LLD.FILTER.IF.NAME.MATCHES}

Filter by discoverable interface names.

.*
{$ZYXEL.LLD.FILTER.IF.NAME.NOT_MATCHES}

Filter to exclude discovered interfaces by name.

CHANGE_IF_NEEDED
{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.MATCHES}

Filter of discoverable link types.

0 - Down link

1 - Cooper link

2 - Fiber link

1|2
{$ZYXEL.LLD.FILTER.IF.LINKUPTYPE.NOT_MATCHES}

Filter to exclude discovered by link types.

CHANGE_IF_NEEDED
{$ZYXEL.LLD.FILTER.SFP.STATUS.MATCHES}

Filter of discoverable status.

0 - OK with DDM

1 - OK without DDM

2 - nonoperational

1|2
{$ZYXEL.LLD.FILTER.SFP.STATUS.NOT_MATCHES}

Filter to exclude discovered by status.

CHANGE_IF_NEEDED
{$ZYXEL.LLD.FILTER.SFPDDM.DESC.MATCHES}

Filter by discoverable SFP modules name.

.*
{$ZYXEL.LLD.FILTER.SFPDDM.DESC.NOT_MATCHES}

Filter to exclude discovered SFP modules by name.

N/A
{$ZYXEL.LLD.SFP.UPDATE}

Receiving data from the SFP module is slow, we do not recommend setting the interval less than 10 minutes.

10m

Items

Name Description Type Key and additional info
ZYXEL MES3500-10: SNMP agent availability Zabbix internal zabbix[host,snmp,available]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: Hardware model name

MIB: RFC1213-MIB

A textual description of the entity. This value

should include the full name and version

identification of the system's hardware type,

software operating-system, and networking

software. It is mandatory that this only contain

printable ASCII characters.

SNMP agent zyxel.3500_10.model

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Contact

MIB: RFC1213-MIB

The textual identification of the contact person

for this managed node, together with information

on how to contact this person.

SNMP agent zyxel.3500_10.contact

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Host name

MIB: RFC1213-MIB

An administratively-assigned name for this

managed node. By convention, this is the node's

fully-qualified domain name.

SNMP agent zyxel.3500_10.name

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Location

MIB: RFC1213-MIB

The physical location of this node (e.g.,

`telephone closet, 3rd floor').

SNMP agent zyxel.3500_10.location

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: MAC address

MIB: IF-MIB

The interface's address at the protocol layer

immediately `below' the network layer in the

protocol stack. For interfaces which do not have

such an address (e.g., a serial line), this object

should contain an octet string of zero length.

SNMP agent zyxel.3500_10.mac

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Uptime (network)

MIB: RFC1213-MIB

The time (in hundredths of a second) since the

network management portion of the system was last

re-initialized.

SNMP agent zyxel.3500_10.net.uptime

Preprocessing

  • Custom multiplier: 0.01

ZYXEL MES3500-10: Uptime (hardware)

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized.

Note that this is different from sysUpTime in the SNMPv2-MIB

[RFC1907] because sysUpTime is the uptime of the

network management portion of the system.

SNMP agent zyxel.3500_10.hw.uptime

Preprocessing

  • Check for not supported value: any error

    ⛔️Custom on fail: Set value to: 0

  • Custom multiplier: 0.01

ZYXEL MES3500-10: ZyNOS F/W Version

MIB: ZYXEL-MES3500-10-MIB

SNMP agent zyxel.3500_10.fwversion

Preprocessing

  • JavaScript: The text is too long. Please see the template.

  • Discard unchanged with heartbeat: 1d

ZYXEL MES3500-10: Hardware serial number

MIB: ZYXEL-MES3500-10-MIB

Serial number

SNMP agent zyxel.3500_10.serialnumber

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: CPU utilization

MIB: ZYXEL-MES3500-10-MIB

Show device CPU load in %, it's the snapshot of CPU load when

getting the values.

SNMP agent zyxel.3500_10.cpuusage

Triggers

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

max(/ZYXEL MES3500-10 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 Warning
ZYXEL MES3500-10: Template does not match hardware

This template is for Zyxel MES3500-10, but connected to {ITEM.VALUE}

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.model)<>"MES3500-10" Info Manual close: Yes
ZYXEL MES3500-10: Host has been restarted

Uptime is less than 10 minutes.

(last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.hw.uptime)>0 and last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.hw.uptime)<10m) or (last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.hw.uptime)=0 and last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.net.uptime)<10m) Info Manual close: Yes
ZYXEL MES3500-10: Firmware has changed

Firmware version has changed. Acknowledge to close the problem manually.

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.fwversion,#1)<>last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.fwversion,#2) and length(last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.fwversion))>0 Info Manual close: Yes
ZYXEL MES3500-10: Device has been replaced

Device serial number has changed. Acknowledge to close the problem manually.

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.serialnumber,#1)<>last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.serialnumber,#2) and length(last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.serialnumber))>0 Info Manual close: Yes
ZYXEL MES3500-10: High CPU utilization

The CPU utilization is too high. The system might be slow to respond.

min(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.cpuusage,5m)>{$CPU.UTIL.CRIT} Warning

LLD rule Temperature discovery

Name Description Type Key and additional info
Temperature discovery

An entry in tempTable.

Index of temperature unit. 1:MAC, 2:CPU, 3:PHY

SNMP agent zyxel.3500_10.temp.discovery

Preprocessing

  • JavaScript: The text is too long. Please see the template.

Item prototypes for Temperature discovery

Name Description Type Key and additional info
ZYXEL MES3500-10: Temperature "{#ZYXEL.TEMP.ID}"

MIB: ZYXEL-MES3500-10-MIB

The current temperature measured at this sensor

SNMP agent zyxel.3500_10.temp[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

Trigger prototypes for Temperature discovery

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: Temperature {#ZYXEL.TEMP.ID} is in critical state

Please check the temperature

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH} Average

LLD rule Voltage discovery

Name Description Type Key and additional info
Voltage discovery

An entry in voltageTable.

SNMP agent zyxel.3500_10.volt.discovery

Preprocessing

  • JavaScript: The text is too long. Please see the template.

Item prototypes for Voltage discovery

Name Description Type Key and additional info
ZYXEL MES3500-10: Nominal "{#ZYXEL.VOLT.NOMINAL}"

MIB: ZYXEL-MES3500-10-MIB

The current voltage reading.

SNMP agent zyxel.3500_10.volt[{#SNMPINDEX}]

Preprocessing

  • Custom multiplier: 0.001

  • Discard unchanged with heartbeat: 1h

Trigger prototypes for Voltage discovery

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state

Please check the power supply

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW} Average

LLD rule Interface discovery

Name Description Type Key and additional info
Interface discovery SNMP agent zyxel.3500_10.net.if.discovery

Item prototypes for Interface discovery

Name Description Type Key and additional info
ZYXEL MES3500-10: Port {#SNMPINDEX}: Speed Duplex

MIB: ZYXEL-MES3500-10-MIB

Transmission mode

SNMP agent zyxel.3500_10.net.if.speed_duplex[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Interface description

MIB: ZYXEL-MES3500-10-MIB

A textual string containing information about the interface

SNMP agent zyxel.3500_10.net.if.name[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Link type

MIB: ZYXEL-MES3500-10-MIB

Physical connection type

SNMP agent zyxel.3500_10.net.if.link_type[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Interface name

MIB: IF-MIB

A textual string containing information about the interface

SNMP agent zyxel.3500_10.net.if.descr[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Operational status

MIB: IF-MIB

The current operational state of the interface.

The testing(3) state indicates that no operational

packets can be passed.

SNMP agent zyxel.3500_10.net.if.operstatus[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Administrative status

MIB: IF-MIB

The desired state of the interface. The

testing(3) state indicates that no operational

packets can be passed.

SNMP agent zyxel.3500_10.net.if.adminstatus[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Incoming traffic

MIB: IF-MIB

The total number of octets received on the interface,

including framing characters.

SNMP agent zyxel.3500_10.net.if.in.traffic[{#SNMPINDEX}]

Preprocessing

  • Custom multiplier: 8

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Incoming unicast packages

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were not addressed to a multicast

or broadcast address at this sub-layer

SNMP agent zyxel.3500_10.net.if.in.ucastpkts[{#SNMPINDEX}]

Preprocessing

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Incoming multicast packages

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses.

SNMP agent zyxel.3500_10.net.if.in.multicastpkts[{#SNMPINDEX}]

Preprocessing

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Incoming broadcast packages

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer.

SNMP agent zyxel.3500_10.net.if.in.broadcastpkts[{#SNMPINDEX}]

Preprocessing

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Outgoing traffic

MIB: IF-MIB

The total number of octets transmitted out of the

interface, including framing characters. This object is a

64-bit version of ifOutOctets.

SNMP agent zyxel.3500_10.net.if.out.traffic[{#SNMPINDEX}]

Preprocessing

  • Custom multiplier: 8

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Outgoing unicast packages

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were not addressed to a

multicast or broadcast address at this sub-layer, including

those that were discarded or not sent.

SNMP agent zyxel.3500_10.net.if.out.ucastpkts[{#SNMPINDEX}]

Preprocessing

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Outgoing multicast packages

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses.

SNMP agent zyxel.3500_10.net.if.out.multicastpkts[{#SNMPINDEX}]

Preprocessing

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Outgoing broadcast packages

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent.

SNMP agent zyxel.3500_10.net.if.out.broadcastpkts[{#SNMPINDEX}]

Preprocessing

  • Change per second
ZYXEL MES3500-10: Port {#SNMPINDEX}: Link speed

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second

SNMP agent zyxel.3500_10.net.if.highspeed[{#SNMPINDEX}]

Preprocessing

  • Custom multiplier: 1000000

  • Discard unchanged with heartbeat: 6h

ZYXEL MES3500-10: Port {#SNMPINDEX}: Incoming utilization

Interface utilization percentage

Calculated zyxel.3500_10.net.if.in.util[{#SNMPINDEX}]

Preprocessing

  • In range: 0 -> 100

    ⛔️Custom on fail: Discard value

  • JavaScript: The text is too long. Please see the template.

ZYXEL MES3500-10: Port {#SNMPINDEX}: Outgoing utilization

Interface utilization percentage

Calculated zyxel.3500_10.net.if.out.util[{#SNMPINDEX}]

Preprocessing

  • In range: 0 -> 100

    ⛔️Custom on fail: Discard value

  • JavaScript: The text is too long. Please see the template.

Trigger prototypes for Interface discovery

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: Port {#SNMPINDEX}: Link down

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.net.if.operstatus[{#SNMPINDEX}],#2) Average Manual close: Yes

LLD rule SFP without DDM discovery

Name Description Type Key and additional info
SFP without DDM discovery

SFP module discovery.

SNMP agent zyxel.3500_10.sfp.discovery

Item prototypes for SFP without DDM discovery

Name Description Type Key and additional info
ZYXEL MES3500-10: SFP {#SNMPINDEX}: Status

MIB: ZYXEL-MES3500-10-MIB

Transceiver module status.

SNMP agent zyxel.3500_10.sfp.status[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: SFP {#SNMPINDEX}: Vendor

MIB: ZYXEL-MES3500-10-MIB

Transceiver module vendor name.

SNMP agent zyxel.3500_10.sfp.vendor[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: SFP {#SNMPINDEX}: Part number

MIB: ZYXEL-MES3500-10-MIB

Part number provided by transceiver module vendor.

SNMP agent zyxel.3500_10.sfp.part[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: SFP {#SNMPINDEX}: Serial number

MIB: ZYXEL-MES3500-10-MIB

Serial number provided by transceiver module vendor.

SNMP agent zyxel.3500_10.sfp.serialnumber[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: SFP {#SNMPINDEX}: Revision

MIB: ZYXEL-MES3500-10-MIB

Revision level for part number provided by transceiver module vendor.

SNMP agent zyxel.3500_10.sfp.revision[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: SFP {#SNMPINDEX}: Date code

MIB: ZYXEL-MES3500-10-MIB

Transceiver module vendor's manufacturing date code.

SNMP agent zyxel.3500_10.sfp.datecode[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

ZYXEL MES3500-10: SFP {#SNMPINDEX}: Transceiver

MIB: ZYXEL-MES3500-10-MIB

Transceiver module type names.

SNMP agent zyxel.3500_10.sfp.transceiver[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

Trigger prototypes for SFP without DDM discovery

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: SFP {#SNMPINDEX} has been replaced

SFP {#SNMPINDEX} serial number has changed. Acknowledge to close the problem manually.

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.sfp.serialnumber[{#SNMPINDEX}],#1)<>last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.sfp.serialnumber[{#SNMPINDEX}],#2) and length(last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.sfp.serialnumber[{#SNMPINDEX}]))>0 Info Manual close: Yes

LLD rule SFP with DDM discovery

Name Description Type Key and additional info
SFP with DDM discovery

SFP DDM module discovery.

SNMP agent zyxel.3500_10.sfp.ddm.discovery

Preprocessing

  • JavaScript: The text is too long. Please see the template.

Item prototypes for SFP with DDM discovery

Name Description Type Key and additional info
ZYXEL MES3500-10: SFP {#ZYXEL.SFP.PORT}: {#ZYXEL.SFP.DESCRIPTION}

MIB: ZYXEL-MES3500-10-MIB

Transceiver module DDM data ({#ZYXEL.SFP.DESCRIPTION}).

SNMP agent zyxel.3500_10.sfp.ddm[{#SNMPINDEX}]

Preprocessing

  • Custom multiplier: 0.01

  • Discard unchanged with heartbeat: 6h

Trigger prototypes for SFP with DDM discovery

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: SFP {#ZYXEL.SFP.PORT}: High {#ZYXEL.SFP.DESCRIPTION}

The upper threshold value of the parameter is exceeded

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.sfp.ddm[{#SNMPINDEX}]) > {#ZYXEL.SFP.WARN.MAX} Warning Manual close: Yes
ZYXEL MES3500-10: SFP {#ZYXEL.SFP.PORT}: Low {#ZYXEL.SFP.DESCRIPTION}

The parameter values are less than the lower threshold

last(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.sfp.ddm[{#SNMPINDEX}]) < {#ZYXEL.SFP.WARN.MIN} Warning Manual close: Yes

LLD rule Memory pool discovery

Name Description Type Key and additional info
Memory pool discovery SNMP agent zyxel.3500_10.memory.discovery

Item prototypes for Memory pool discovery

Name Description Type Key and additional info
ZYXEL MES3500-10: Memory "{#ZYXEL.MEMORY.NAME}" utilization

MIB: ZYXEL-MES3500-10-MIB

Utilization of memory pool in %.

SNMP agent zyxel.3500_10.memory[{#SNMPINDEX}]

Preprocessing

  • Discard unchanged with heartbeat: 1h

Trigger prototypes for Memory pool discovery

Name Description Expression Severity Dependencies and additional info
ZYXEL MES3500-10: High memory utilization in "{#ZYXEL.MEMORY.NAME}" pool

The system is running out of free memory.

min(/ZYXEL MES3500-10 by SNMP/zyxel.3500_10.memory[{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX} Average

Feedback

Please report any issues with the template at https://support.zabbix.com

You can also provide feedback, discuss the template, or ask for help at ZABBIX forums

Articles and documentation

+ Propose new article

Vous n’avez pas trouvé ce que vous cherchiez ?