Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/ciena?at=release/7.4
Ciena 3906 by SNMP
Overview
Ciena’s 3906 Platform is a compact, smart CPE that delivers gigabit Ethernet service capability with virtual network function integration. Learn more about the Ciena 3906 Platform here: https://www.ciena.com/products/3906
Requirements
Zabbix version: 7.4 and higher.
Tested versions
This template has been tested on:
- Ciena 3906
Configuration
Zabbix should be configured according to the instructions in the Templates out of the box section.
Setup
Refer to the vendor documentation.
Macros used
Name | Description | Default |
---|---|---|
{$CIENA.MEMORY.UTIL.MAX} | Threshold of memory utilization expressed in %. |
90 |
{$CIENA.CPU.UTIL.CRIT} | Threshold of CPU utilization expressed in %. |
90 |
{$SNMP.TIMEOUT} | Time interval for the SNMP availability trigger. |
5m |
{$ICMP_LOSS_WARN} | Warning threshold of ICMP packet loss in %. |
20 |
{$ICMP_RESPONSE_TIME_WARN} | Warning threshold of the average ICMP response time in seconds. |
0.15 |
{$IFCONTROL} | Link status trigger will be fired only for interfaces where the context macro equals "1". |
1 |
{$IF.UTIL.MAX} | Used as a threshold in the interface utilization trigger. |
90 |
{$IF.ERRORS.WARN} | Warning threshold of error packet rate. Can be used with interface name as context. |
2 |
{$NET.IF.IFNAME.MATCHES} | Used for network interface discovery. Can be overridden on the host or linked template level. |
^.*$ |
{$NET.IF.IFNAME.NOT_MATCHES} | Filters out |
Macro too long. Please see the template. |
{$NET.IF.IFOPERSTATUS.MATCHES} | Used for network interface discovery. Can be overridden on the host or linked template level. |
^.*$ |
{$NET.IF.IFOPERSTATUS.NOT_MATCHES} | Ignore |
^6$ |
{$NET.IF.IFADMINSTATUS.MATCHES} | Used in network interface discovery rule filters. |
^.* |
{$NET.IF.IFADMINSTATUS.NOT_MATCHES} | Ignore |
^2$ |
{$NET.IF.IFDESCR.MATCHES} | Used in network interface discovery rule filters. |
.* |
{$NET.IF.IFDESCR.NOT_MATCHES} | Used in network interface discovery rule filters. |
CHANGE_IF_NEEDED |
{$NET.IF.IFALIAS.MATCHES} | Used in network interface discovery rule filters. |
.* |
{$NET.IF.IFALIAS.NOT_MATCHES} | Used in network interface discovery rule filters. |
CHANGE_IF_NEEDED |
{$NET.IF.IFTYPE.MATCHES} | Used in network interface discovery rule filters. |
.* |
{$NET.IF.IFTYPE.NOT_MATCHES} | Used in network interface discovery rule filters. |
CHANGE_IF_NEEDED |
Items
Name | Description | Type | Key and additional info |
---|---|---|---|
Hardware model name | MIB: WWP-LEOS-BLADE-MIB Model name of the hardware. |
SNMP agent | system.hw.model Preprocessing
|
Hardware serial number | MIB: WWP-LEOS-BLADE-MIB The serial number of the product. |
SNMP agent | system.hw.serialnumber Preprocessing
|
Hardware version (revision) | MIB: WWP-LEOS-BLADE-MIB The hardware version of the product. |
SNMP agent | system.hw.version Preprocessing
|
CPU utilization | MIB: WWP-LEOS-SYSTEM-CONFIG-MIB CPU utilization over 60 seconds. |
SNMP agent | ciena.cpu.utilization |
Memory available | MIB: WWP-LEOS-SYSTEM-CONFIG-MIB Available memory in bytes. |
SNMP agent | ciena.memory.available Preprocessing
|
Memory used | MIB: WWP-LEOS-SYSTEM-CONFIG-MIB Used memory in bytes. |
SNMP agent | ciena.memory.used Preprocessing
|
Memory utilization | Memory utilization, in percent. |
Calculated | ciena.memory.utilization |
SNMP walk temperature sensors | MIB: WWP-LEOS-CHASSIS-MIB Used for discovering system temperature sensors. |
SNMP agent | system.temperature.sensor.walk |
SNMP walk fan | MIB: WWP-LEOS-CHASSIS-MIB Used for discovering system fans. |
SNMP agent | system.fan.walk |
SNMP walk PSU | MIB: WWP-LEOS-CHASSIS-MIB Used for discovering the system power supply. |
SNMP agent | system.psu.walk |
Uptime (network) | MIB: SNMPv2-MIB Time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
SNMP agent | system.net.uptime[sysUpTime.0] Preprocessing
|
Uptime (hardware) | MIB: HOST-RESOURCES-MIB The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system. |
SNMP agent | system.hw.uptime[hrSystemUptime.0] Preprocessing
|
SNMP traps (fallback) | The item is used to collect all SNMP traps unmatched by other snmptrap items |
SNMP trap | snmptrap.fallback |
System location | MIB: SNMPv2-MIB Physical location of the node (e.g., |
SNMP agent | system.location[sysLocation.0] Preprocessing
|
System contact details | MIB: SNMPv2-MIB The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string. |
SNMP agent | system.contact[sysContact.0] Preprocessing
|
System object ID | MIB: SNMPv2-MIB The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining |
SNMP agent | system.objectid[sysObjectID.0] Preprocessing
|
System name | MIB: SNMPv2-MIB An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string. |
SNMP agent | system.name Preprocessing
|
System description | MIB: SNMPv2-MIB A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. |
SNMP agent | system.descr[sysDescr.0] Preprocessing
|
SNMP agent availability | Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list. Possible values: 0 - not available 1 - available 2 - unknown |
Zabbix internal | zabbix[host,snmp,available] |
ICMP ping | The host accessibility by ICMP ping. 0 - ICMP ping fails; 1 - ICMP ping successful. |
Simple check | icmpping |
ICMP loss | The percentage of lost packets. |
Simple check | icmppingloss |
ICMP response time | The ICMP ping response time (in seconds). |
Simple check | icmppingsec |
SNMP walk network interfaces | Used for discovering interfaces from IF-MIB. |
SNMP agent | net.if.walk |
Triggers
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
Ciena: Device has been replaced | The Ciena device serial number has changed. Acknowledge to close the problem manually. |
last(/Ciena 3906 by SNMP/system.hw.serialnumber,#1)<>last(/Ciena 3906 by SNMP/system.hw.serialnumber,#2) and length(last(/Ciena 3906 by SNMP/system.hw.serialnumber))>0 |
Info | Manual close: Yes |
Ciena: High CPU utilization | The CPU utilization is too high. The system might be slow to respond. |
min(/Ciena 3906 by SNMP/ciena.cpu.utilization,5m)>{$CIENA.CPU.UTIL.CRIT} |
Warning | |
Ciena: High memory utilization | The system is running out of free memory. |
min(/Ciena 3906 by SNMP/ciena.memory.utilization,5m)>{$CIENA.MEMORY.UTIL.MAX} |
Average | |
Ciena: Host has been restarted | Uptime is less than 10 minutes. |
(last(/Ciena 3906 by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/Ciena 3906 by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/Ciena 3906 by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/Ciena 3906 by SNMP/system.net.uptime[sysUpTime.0])<10m) |
Warning | Manual close: Yes Depends on:
|
Ciena: System name has changed | The name of the system has changed. Acknowledge to close the problem manually. |
last(/Ciena 3906 by SNMP/system.name,#1)<>last(/Ciena 3906 by SNMP/system.name,#2) and length(last(/Ciena 3906 by SNMP/system.name))>0 |
Info | Manual close: Yes |
Ciena: No SNMP data collection | SNMP is not available for polling. Please check device connectivity and SNMP settings. |
max(/Ciena 3906 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 |
Warning | Depends on:
|
Ciena: Unavailable by ICMP ping | Last three attempts returned timeout. Please check device connectivity. |
max(/Ciena 3906 by SNMP/icmpping,#3)=0 |
High | |
Ciena: High ICMP ping loss | ICMP packets loss detected. |
min(/Ciena 3906 by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Ciena 3906 by SNMP/icmppingloss,5m)<100 |
Warning | Depends on:
|
Ciena: High ICMP ping response time | Average ICMP response time is too high. |
avg(/Ciena 3906 by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} |
Warning | Depends on:
|
LLD rule Temperature sensor discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Temperature sensor discovery | Used for discovering temperature sensors from WWP-LEOS-CHASSIS-MIB. |
Dependent item | ciena.temperature.sensor.discovery Preprocessing
|
Item prototypes for Temperature sensor discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Sensor [{#SNMPVALUE}]: Temperature | MIB: WWP-LEOS-CHASSIS-MIB The value of temperature measured by the sensor inside the device in degrees Celsius. |
Dependent item | ciena.temperature.sensors.temp[ChassisTempSensorValue.{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Temperature sensor discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
Ciena: Sensor [{#SNMPVALUE}]: High chassis temperature | The current temperature is higher than the threshold state. |
min(/Ciena 3906 by SNMP/ciena.temperature.sensors.temp[ChassisTempSensorValue.{#SNMPINDEX}],5m)>{#CIENA.TEMPERATURE.HIGH} |
Average | |
Ciena: Sensor [{#SNMPVALUE}]: Low chassis temperature | The current temperature is lower than the threshold state. |
max(/Ciena 3906 by SNMP/ciena.temperature.sensors.temp[ChassisTempSensorValue.{#SNMPINDEX}],5m)<{#CIENA.TEMPERATURE.LOW} |
Average |
LLD rule Fan discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Fan discovery | Used for discovering fans from WWP-LEOS-CHASSIS-MIB. |
Dependent item | ciena.fan.discovery Preprocessing
|
Item prototypes for Fan discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Fan [{#SNMPVALUE}]: Status | MIB: WWP-LEOS-CHASSIS-MIB Denotes the fan module status. Possible values: 1 - "ok"; means fan is operational; 2 - "pending"; means fan is installed but statistics are not yet available; 3 - "failure"; means fan is not working. |
Dependent item | ciena.fan.status[ChassisFanModuleStatus.{#SNMPINDEX}] Preprocessing
|
Fan [{#SNMPVALUE}]: Speed | MIB: WWP-LEOS-CHASSIS-MIB The current speed of the fan in RPM. |
Dependent item | ciena.fan.speed[ChassisFanCurrentSpeed.{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Fan discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
Ciena: Fan [{#SNMPVALUE}]: Fan status is Failure | The fan status is "failure". |
last(/Ciena 3906 by SNMP/ciena.fan.status[ChassisFanModuleStatus.{#SNMPINDEX}])=3 |
Average |
LLD rule PSU discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
PSU discovery | Used for discovering PSU from WWP-LEOS-CHASSIS-MIB. |
Dependent item | ciena.psu.discovery Preprocessing
|
Item prototypes for PSU discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
PSU [{#SNMPVALUE}]: Status | MIB: WWP-LEOS-CHASSIS-MIB Denotes the PSU module status. Possible values: 1 - online; 2 - offline; 3 - faulted. |
Dependent item | ciena.psu.status[ChassisPowerSupplyState.{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for PSU discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
Ciena: PSU [{#SNMPVALUE}]: Status is Faulted | The PSU status is "faulted". |
last(/Ciena 3906 by SNMP/ciena.psu.status[ChassisPowerSupplyState.{#SNMPINDEX}])=3 |
Average |
LLD rule Network interfaces discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Network interfaces discovery | Discovering interfaces from IF-MIB. |
Dependent item | net.if.discovery Preprocessing
|
Item prototypes for Network interfaces discovery
Name | Description | Type | Key and additional info |
---|---|---|---|
Interface {#IFNAME}({#IFALIAS}): Operational status | MIB: IF-MIB The current operational state of the interface. - The testing(3) state indicates that no operational packet scan be passed - If ifAdminStatus is down(2) then ifOperStatus should be down(2) - If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic - It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection) - It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state - It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components. |
Dependent item | net.if.status[ifOperStatus.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Bits received | MIB: IF-MIB The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
Dependent item | net.if.in[ifHCInOctets.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Bits sent | MIB: IF-MIB The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
Dependent item | net.if.out[ifHCOutOctets.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors | MIB: IF-MIB For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
Dependent item | net.if.in.errors[ifInErrors.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors | MIB: IF-MIB For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
Dependent item | net.if.out.errors[ifOutErrors.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded | MIB: IF-MIB The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
Dependent item | net.if.out.discards[ifOutDiscards.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded | MIB: IF-MIB The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
Dependent item | net.if.in.discards[ifInDiscards.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Interface type | MIB: IF-MIB The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention. |
Dependent item | net.if.type[ifType.{#SNMPINDEX}] Preprocessing
|
Interface {#IFNAME}({#IFALIAS}): Speed | MIB: IF-MIB An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. |
Dependent item | net.if.speed[ifHighSpeed.{#SNMPINDEX}] Preprocessing
|
Trigger prototypes for Network interfaces discovery
Name | Description | Expression | Severity | Dependencies and additional info |
---|---|---|---|---|
Ciena: Interface {#IFNAME}({#IFALIAS}): Link down | This trigger expression works as follows: |
{$IFCONTROL:"{#IFNAME}"}=1 and last(/Ciena 3906 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Ciena 3906 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Ciena 3906 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2)) |
Average | Manual close: Yes |
Ciena: Interface {#IFNAME}({#IFALIAS}): High bandwidth usage | The utilization of the network interface is close to its estimated maximum bandwidth. |
(avg(/Ciena 3906 by SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Ciena 3906 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Ciena 3906 by SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Ciena 3906 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Ciena 3906 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 |
Warning | Manual close: Yes Depends on:
|
Ciena: Interface {#IFNAME}({#IFALIAS}): High error rate | It recovers when it is below 80% of the |
min(/Ciena 3906 by SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Ciena 3906 by SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} |
Warning | Manual close: Yes Depends on:
|
Ciena: Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before | This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually. |
change(/Ciena 3906 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Ciena 3906 by SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Ciena 3906 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Ciena 3906 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Ciena 3906 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Ciena 3906 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Ciena 3906 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Ciena 3906 by SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Ciena 3906 by SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2) |
Info | Manual close: Yes Depends on:
|
Feedback
Please report any issues with the template at https://support.zabbix.com
You can also provide feedback, discuss the template, or ask for help at ZABBIX forums