Extreme Networks

Extreme Networks designs, develops, and manufactures wired and wireless network infrastructure equipment and develops the software for network management, policy, analytics, security and access controls.

Available solutions




This template is for Zabbix version: 6.2
Also available for: 6.0 5.4 5.0

Source: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/net/extreme_snmp?at=release/6.2

Extreme EXOS SNMP

Overview

For Zabbix version: 6.2 and higher

Setup

Refer to the vendor documentation.

Zabbix configuration

No specific Zabbix configuration is required.

Macros used

Name Description Default
{$CPU.UTIL.CRIT}

-

90
{$FAN_CRIT_STATUS}

-

2
{$ICMP_LOSS_WARN}

-

20
{$ICMP_RESPONSE_TIME_WARN}

-

0.15
{$IF.ERRORS.WARN}

-

2
{$IF.UTIL.MAX}

-

90
{$IFCONTROL}

-

1
{$MEMORY.UTIL.MAX}

-

90
{$NET.IF.IFADMINSTATUS.MATCHES}

Ignore notPresent(6)

^.*
{$NET.IF.IFADMINSTATUS.NOT_MATCHES}

Ignore down(2) administrative status

^2$
{$NET.IF.IFALIAS.MATCHES}

-

.*
{$NET.IF.IFALIAS.NOT_MATCHES}

-

CHANGE_IF_NEEDED
{$NET.IF.IFDESCR.MATCHES}

-

.*
{$NET.IF.IFDESCR.NOT_MATCHES}

-

CHANGE_IF_NEEDED
{$NET.IF.IFNAME.MATCHES}

-

^.*$
{$NET.IF.IFNAME.NOT_MATCHES}

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

(^Software Loopback Interface|^NULL[0-9.]*$|^[Ll]o[0-9.]*$|^[Ss]ystem$|^Nu[0-9.]*$|^veth[0-9a-z]+$|docker[0-9]+|br-[a-z0-9]{12})
{$NET.IF.IFOPERSTATUS.MATCHES}

-

^.*$
{$NET.IF.IFOPERSTATUS.NOT_MATCHES}

Ignore notPresent(6)

^6$
{$NET.IF.IFTYPE.MATCHES}

-

.*
{$NET.IF.IFTYPE.NOT_MATCHES}

-

CHANGE_IF_NEEDED
{$PSU_CRIT_STATUS}

-

3
{$SNMP.TIMEOUT}

-

5m
{$TEMP_CRIT_LOW}

-

5
{$TEMP_CRIT_STATUS}

-

1
{$TEMP_CRIT}

-

65
{$TEMP_WARN}

-

55

Template links

There are no template links in this template.

Discovery rules

Name Description Type Key and additional info
EtherLike-MIB Discovery

Discovering interfaces from IF-MIB and EtherLike-MIB. Interfaces with up(1) Operational Status are discovered.

SNMP net.if.duplex.discovery

Preprocessing:

- JAVASCRIPT: The text is too long. Please see the template.

Filter:

AND

- {#IFOPERSTATUS} MATCHES_REGEX 1

- {#SNMPVALUE} MATCHES_REGEX (2|3)

FAN Discovery

-

SNMP fan.discovery
Memory Discovery

-

SNMP memory.discovery
Network interfaces discovery

Discovering interfaces from IF-MIB.

SNMP net.if.discovery

Filter:

AND

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- {#IFALIAS} MATCHES_REGEX {$NET.IF.IFALIAS.MATCHES}

- {#IFALIAS} NOT_MATCHES_REGEX {$NET.IF.IFALIAS.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

PSU Discovery

Table of status of all power supplies in the system.

SNMP psu.discovery

Items collected

Group Name Description Type Key and additional info
CPU CPU utilization

MIB: EXTREME-SOFTWARE-MONITOR-MIB

Total CPU utlization (percentage) as of last sampling.

SNMP system.cpu.util[extremeCpuMonitorTotalUtilization.0]
Fans Fan {#SNMPVALUE}: Fan status

MIB: EXTREME-SYSTEM-MIB

Operational status of a cooling fan.

SNMP sensor.fan.status[extremeFanOperational.{#SNMPINDEX}]
Fans Fan {#SNMPVALUE}: Fan speed

MIB: EXTREME-SYSTEM-MIB

The speed (RPM) of a cooling fan in the fantray {#SNMPVALUE}

SNMP sensor.fan.speed[extremeFanSpeed.{#SNMPINDEX}]
General SNMP traps (fallback)

The item is used to collect all SNMP traps unmatched by other snmptrap items

SNMP_TRAP snmptrap.fallback
General System location

MIB: SNMPv2-MIB

The physical location of this node (e.g., telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p> |SNMP |system.location[sysLocation.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:12h`

General System contact details

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

SNMP system.contact[sysContact.0]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

General System object ID

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its Fred Router'.</p> |SNMP |system.objectid[sysObjectID.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:12h`

General System name

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

SNMP system.name

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

General System description

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

SNMP system.descr[sysDescr.0]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

Inventory Hardware model name

MIB: ENTITY-MIB

SNMP system.hw.model

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Inventory Hardware serial number

MIB: ENTITY-MIB

SNMP system.hw.serialnumber

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Inventory Firmware version

MIB: ENTITY-MIB

SNMP system.hw.firmware

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Inventory Hardware version(revision)

MIB: ENTITY-MIB

SNMP system.hw.version

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Inventory Operating system

MIB: EXTREME-SYSTEM-MIB

The software revision of the primary image stored in this device.

This string will have a zero length if the revision is unknown, invalid or not present.

This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.

SNMP system.sw.os[extremePrimarySoftwareRev.0]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Memory #{#SNMPVALUE}: Available memory

MIB: EXTREME-SOFTWARE-MONITOR-MIB

Total amount of free memory in Kbytes in the system.

SNMP vm.memory.available[extremeMemoryMonitorSystemFree.{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 1024

Memory #{#SNMPVALUE}: Total memory

MIB: EXTREME-SOFTWARE-MONITOR-MIB

Total amount of DRAM in Kbytes in the system.

SNMP vm.memory.total[extremeMemoryMonitorSystemTotal.{#SNMPINDEX}]

Preprocessing:

- MULTIPLIER: 1024

Memory #{#SNMPVALUE}: Memory utilization

Memory utilization in %.

CALCULATED vm.memory.util[{#SNMPVALUE}]

Expression:

(last(//vm.memory.total[extremeMemoryMonitorSystemTotal.{#SNMPINDEX}]) - last(//vm.memory.available[extremeMemoryMonitorSystemFree.{#SNMPINDEX}])) / last(//vm.memory.total[extremeMemoryMonitorSystemTotal.{#SNMPINDEX}]) * 100
Network interfaces Interface {#IFNAME}({#IFALIAS}): Duplex status

MIB: EtherLike-MIB

The current mode of operation of the MAC

entity. 'unknown' indicates that the current

duplex mode could not be determined.

Management control of the duplex mode is

accomplished through the MAU MIB. When

an interface does not support autonegotiation,

or when autonegotiation is not enabled, the

duplex mode is controlled using

ifMauDefaultType. When autonegotiation is

supported and enabled, duplex mode is controlled

using ifMauAutoNegAdvertisedBits. In either

case, the currently operating duplex mode is

reflected both in this object and in ifMauType.

Note that this object provides redundant

information with ifMauType. Normally, redundant

objects are discouraged. However, in this

instance, it allows a management application to

determine the duplex status of an interface

without having to know every possible value of

ifMauType. This was felt to be sufficiently

valuable to justify the redundancy.

Reference: [IEEE 802.3 Std.], 30.3.1.1.32,aDuplexStatus.

SNMP net.if.duplex[dot3StatsDuplexStatus.{#SNMPINDEX}]
Network interfaces Interface {#IFNAME}({#IFALIAS}): Operational status

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

SNMP net.if.status[ifOperStatus.{#SNMPINDEX}]
Network interfaces Interface {#IFNAME}({#IFALIAS}): Bits received

MIB: IF-MIB

The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.in[ifHCInOctets.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

Network interfaces Interface {#IFNAME}({#IFALIAS}): Bits sent

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.out[ifHCOutOctets.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

Network interfaces Interface {#IFNAME}({#IFALIAS}): Inbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.in.errors[ifInErrors.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Outbound packets with errors

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.out.errors[ifOutErrors.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Outbound packets discarded

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.out.discards[ifOutDiscards.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Inbound packets discarded

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

SNMP net.if.in.discards[ifInDiscards.{#SNMPINDEX}]

Preprocessing:

- CHANGE_PER_SECOND

Network interfaces Interface {#IFNAME}({#IFALIAS}): Interface type

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

SNMP net.if.type[ifType.{#SNMPINDEX}]

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

Network interfaces Interface {#IFNAME}({#IFALIAS}): Speed

MIB: IF-MIB

An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of n' then the speed of the interface is somewhere in the range ofn-500,000' ton+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.</p> |SNMP |net.if.speed[ifHighSpeed.{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- MULTIPLIER:1000000</p><p>- DISCARD_UNCHANGED_HEARTBEAT:1h`

Power supply PSU {#SNMPVALUE}: Power supply status

MIB: EXTREME-SYSTEM-MIB

Status of the power supply {#SNMPVALUE}

SNMP sensor.psu.status[extremePowerSupplyStatus.{#SNMPINDEX}]
Status Uptime

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

SNMP system.uptime[sysUpTime.0]

Preprocessing:

- MULTIPLIER: 0.01

Status SNMP agent availability

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

INTERNAL zabbix[host,snmp,available]
Status ICMP ping

-

SIMPLE icmpping
Status ICMP loss

-

SIMPLE icmppingloss
Status ICMP response time

-

SIMPLE icmppingsec
Temperature Device: Temperature

MIB: EXTREME-SYSTEM-MIB

Temperature readings of testpoint: Device

Reference: https://gtacknowledge.extremenetworks.com/articles/Q_A/Does-EXOS-support-temperature-polling-via-SNMP-on-all-nodes-in-a-stack

SNMP sensor.temp.value[extremeCurrentTemperature.0]
Temperature Device: Temperature status

MIB: EXTREME-SYSTEM-MIB

Temperature status of testpoint: Device

SNMP sensor.temp.status[extremeOverTemperatureAlarm.0]

Triggers

Name Description Expression Severity Dependencies and additional info
High CPU utilization

CPU utilization is too high. The system might be slow to respond.

min(/Extreme EXOS SNMP/system.cpu.util[extremeCpuMonitorTotalUtilization.0],5m)>{$CPU.UTIL.CRIT} WARNING
Fan {#SNMPVALUE}: Fan is in critical state

Please check the fan unit

count(/Extreme EXOS SNMP/sensor.fan.status[extremeFanOperational.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS}")=1 AVERAGE
System name has changed

System name has changed. Ack to close.

last(/Extreme EXOS SNMP/system.name,#1)<>last(/Extreme EXOS SNMP/system.name,#2) and length(last(/Extreme EXOS SNMP/system.name))>0 INFO

Manual close: YES

Device has been replaced

Device serial number has changed. Ack to close

last(/Extreme EXOS SNMP/system.hw.serialnumber,#1)<>last(/Extreme EXOS SNMP/system.hw.serialnumber,#2) and length(last(/Extreme EXOS SNMP/system.hw.serialnumber))>0 INFO

Manual close: YES

Firmware has changed

Firmware version has changed. Ack to close

last(/Extreme EXOS SNMP/system.hw.firmware,#1)<>last(/Extreme EXOS SNMP/system.hw.firmware,#2) and length(last(/Extreme EXOS SNMP/system.hw.firmware))>0 INFO

Manual close: YES

Operating system description has changed

Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.

last(/Extreme EXOS SNMP/system.sw.os[extremePrimarySoftwareRev.0],#1)<>last(/Extreme EXOS SNMP/system.sw.os[extremePrimarySoftwareRev.0],#2) and length(last(/Extreme EXOS SNMP/system.sw.os[extremePrimarySoftwareRev.0]))>0 INFO

Manual close: YES

Depends on:

- System name has changed

#{#SNMPVALUE}: High memory utilization

The system is running out of free memory.

min(/Extreme EXOS SNMP/vm.memory.util[{#SNMPVALUE}],5m)>{$MEMORY.UTIL.MAX} AVERAGE
Interface {#IFNAME}({#IFALIAS}): In half-duplex mode

Please check autonegotiation settings and cabling

last(/Extreme EXOS SNMP/net.if.duplex[dot3StatsDuplexStatus.{#SNMPINDEX}])=2 WARNING

Manual close: YES

Interface {#IFNAME}({#IFALIAS}): Link down

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

{$IFCONTROL:"{#IFNAME}"}=1 and last(/Extreme EXOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2 and (last(/Extreme EXOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#1)<>last(/Extreme EXOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}],#2))

Recovery expression:

last(/Extreme EXOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2 or {$IFCONTROL:"{#IFNAME}"}=0
AVERAGE

Manual close: YES

Interface {#IFNAME}({#IFALIAS}): High bandwidth usage

The network interface utilization is close to its estimated maximum bandwidth.

(avg(/Extreme EXOS SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) or avg(/Extreme EXOS SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)>({$IF.UTIL.MAX:"{#IFNAME}"}/100)*last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])) and last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0

Recovery expression:

avg(/Extreme EXOS SNMP/net.if.in[ifHCInOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}]) and avg(/Extreme EXOS SNMP/net.if.out[ifHCOutOctets.{#SNMPINDEX}],15m)<(({$IF.UTIL.MAX:"{#IFNAME}"}-3)/100)*last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])
WARNING

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Interface {#IFNAME}({#IFALIAS}): High error rate

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

min(/Extreme EXOS SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/Extreme EXOS SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"}

Recovery expression:

max(/Extreme EXOS SNMP/net.if.in.errors[ifInErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/Extreme EXOS SNMP/net.if.out.errors[ifOutErrors.{#SNMPINDEX}],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8
WARNING

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

Interface {#IFNAME}({#IFALIAS}): Ethernet has changed to lower speed than it was before

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

change(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])<0 and last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and ( last(/Extreme EXOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=6 or last(/Extreme EXOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=7 or last(/Extreme EXOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=11 or last(/Extreme EXOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=62 or last(/Extreme EXOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=69 or last(/Extreme EXOS SNMP/net.if.type[ifType.{#SNMPINDEX}])=117 ) and (last(/Extreme EXOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])<>2)

Recovery expression:

(change(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}])>0 and last(/Extreme EXOS SNMP/net.if.speed[ifHighSpeed.{#SNMPINDEX}],#2)>0) or (last(/Extreme EXOS SNMP/net.if.status[ifOperStatus.{#SNMPINDEX}])=2)
INFO

Manual close: YES

Depends on:

- Interface {#IFNAME}({#IFALIAS}): Link down

PSU {#SNMPVALUE}: Power supply is in critical state

Please check the power supply unit for errors

count(/Extreme EXOS SNMP/sensor.psu.status[extremePowerSupplyStatus.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS}")=1 AVERAGE
has been restarted

Uptime is less than 10 minutes.

last(/Extreme EXOS SNMP/system.uptime[sysUpTime.0])<10m WARNING

Manual close: YES

Depends on:

- No SNMP data collection

No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

max(/Extreme EXOS SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0 WARNING

Depends on:

- Unavailable by ICMP ping

Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

max(/Extreme EXOS SNMP/icmpping,#3)=0 HIGH
High ICMP ping loss

-

min(/Extreme EXOS SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/Extreme EXOS SNMP/icmppingloss,5m)<100 WARNING

Depends on:

- Unavailable by ICMP ping

High ICMP ping response time

-

avg(/Extreme EXOS SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN} WARNING

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

Device: Temperature is above warning threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

avg(/Extreme EXOS SNMP/sensor.temp.value[extremeCurrentTemperature.0],5m)>{$TEMP_WARN}

Recovery expression:

max(/Extreme EXOS SNMP/sensor.temp.value[extremeCurrentTemperature.0],5m)<{$TEMP_WARN}-3
WARNING

Depends on:

- Device: Temperature is above critical threshold

Device: Temperature is above critical threshold

This trigger uses temperature sensor values as well as temperature sensor status if available

avg(/Extreme EXOS SNMP/sensor.temp.value[extremeCurrentTemperature.0],5m)>{$TEMP_CRIT} or last(/Extreme EXOS SNMP/sensor.temp.status[extremeOverTemperatureAlarm.0])={$TEMP_CRIT_STATUS}

Recovery expression:

max(/Extreme EXOS SNMP/sensor.temp.value[extremeCurrentTemperature.0],5m)<{$TEMP_CRIT}-3
HIGH
Device: Temperature is too low

-

avg(/Extreme EXOS SNMP/sensor.temp.value[extremeCurrentTemperature.0],5m)<{$TEMP_CRIT_LOW}

Recovery expression:

min(/Extreme EXOS SNMP/sensor.temp.value[extremeCurrentTemperature.0],5m)>{$TEMP_CRIT_LOW}+3
AVERAGE

Feedback

Please report any issues with the template at https://support.zabbix.com

Articles and documentation

+ Propose new article

Nenašli jste integraci, kterou potřebujete?