Zabbix + UPS

Simple SNMPv1 template for Delta UPS with LLD for lines.Tested on Zabbix 3.0 but should works on older versions.Required extra configuration:Macro for {$SNMP_COMMUNITY}UPS-MIB

Template made based on Phillip Hernandez APC UPS template.All OID´s were changed to match general MIB for UPS.New graphs were also added.25 Items8 Triggers8 GraphsI also have a template for non three-phase ups, feel free to check the Network UPS (generic) template

Full clone of Template UPS - diogont (thanks Diogo Teixeira). Above you view the main changes for this template:For the metrics. We included the measurements 2 and 3:UPS input currentUPS input frequencyUPS input powerUPS input voltageUPS output currentUPS output frequencyUPS output loadUPS output powerUPS output voltagePay attentionFor triggers in my case 38 has disabled. we added this SNMP Check connect what check if the UPS have snmp connectivity. If past ten minute without data

Template made based on Phillip Hernandez APC UPS template.All OID´s were changed to match general MIB for UPS.New graphs were also added.21 Items9 Triggers7 GraphsI also have a template made for three-phase UPSs, feel free to check the Network UPS three-phase (generic) template

This template is for situation when you have apcupsd, but cannot install zabbix agent. Tested with Centos 6.x.You have to install apcupsd and configure it, configure ssh access for user by certificate.Provides:Items: model, serial number, number of switching (xfers), name (set in apcupsd config), status (ONLINE and etc), charge level, timeleft.Triggers: minimal timeleft is equal or less then {$APC_SMARTUPS_MINIMAL_TIMELEFT}, status is not ONLINE.Requires macroses:{$UPS_GET_MAININFO_PERIOD} - period of getting model and etc.{$UPS_GET_STATUS_PERIOD} – period of getting status, timeleft, status.{$APC_SMARTUPS_MINIMAL_TIMELEFT} –minimal timeleft for trigger.{$SSH_CONNECT_USERNAME} – user for connecting by ssh.If you have any ideas to make this template better, comment, please.

Zabbix Template for NUT(Network UPS Tools)

Tested with model PMR 6kV, should work with other models too (and probably with more chinease made UPS that partially use RFC-1628) only basic items, some triggers and graphs added as well.

This is all of the parts for deploying monitoring for tripplite SNMPWEBCARD devices. Currently, this is only complete for a PDUMH20ATNET, but can be easily expanded/updated to include items for many (all?) PDU and UPS models from Tripp Lite.

Zabbix templates and agent files to monitor Powercom BNT-xxx UPS series