Teracom TCW122B-WD IP watchdog monitoring moduleTCW122B-WD is an IP watchdog monitoring module, based on TCW122 hardware. It has 2 digital and 2 analog inputs. It supports up to two temperature/humidity sensors on its 1-Wire interface. The IP watchdog controller has also two relays with normally open and normally closed contacts. TCW122B-WD is dedicated to IP watchdog monitoring as a stand-alone device.The controller supports also SNMP v1 as M2M protocol. It can also be used as a part of small to medium SCADA systems for environmental monitoring of server rooms.TCW122B-WD featuresPassword protected, web-based configuration and control;2 digital inputs with " dry contact" and "logic level" modes;2 analog inputs with 0 to 60VDC range;2 relays with NO and NC contacts;1-Wire interface for up to 2 temperature (TST1XX) or temperature/humidity (TSH2xx) sensors;SNMP v.1 support, SNMP trap alerts;SNMP traps for alert conditions;HTTP and SNMP port changing;VLAN, MAC address filtering;ICMP watchdog monitoring;Remote firmware update.TCW122B-WD Zabbix templateTriggersHumidity 1 high alarmHumidity 1 low alarmHumidity 2 high alarmHumidity 2 low alarmTemperature 1 high alarmTemperature 1 low alarmTemperature 2 high alarmTemperature 2 low alarmVoltage 1 high alarmVoltage 1 low alarmVoltage 2 high alarmVoltage 2 low alarmAdjust trigger values from TCW122B-WD´s web user interface. To avoid false alarms when you have no onewire sensors, set upper limit to 201. Alteranatively disable triggers.GraphsHumidity sensor 1Humidity sensor 2Temperature sensor 1Temperature sensor 2Voltage 1Voltage 2TrapsTo get human readable snmp traps, you need snmptt.EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 "Status Events" INFORMATIONALFORMAT ZBXTRAP $aA SD TCW122B-WD digital input1 value $1MATCH $-*: (.iso.3.6.1.4.1.38783.3.1.0)EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 "Status Events" INFORMATIONALFORMAT ZBXTRAP $aA SD TCW122B-WD digital input2 value $1MATCH $-*: (.iso.3.6.1.4.1.38783.3.2.0)EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 "Status Events" INFORMATIONALFORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage1 value $1MATCH $-*: (.iso.3.6.1.4.1.38783.3.7.0)EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 "Status Events" INFORMATIONALFORMAT ZBXTRAP $aA SD TCW122B-WD analog voltage2 value $1MATCH $-*: (.iso.3.6.1.4.1.38783.3.8.0)EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 "Status Events" INFORMATIONALFORMAT ZBXTRAP $aA SD TCW122B-WD temperature1 value $1MATCH $-*: (.iso.3.6.1.4.1.38783.3.9.0)EVENT TCW122B-WD .1.3.6.1.4.1.38783.0.1 "Status Events" IN
