Time interval for the SNMP availability trigger.

Warning threshold of ICMP packet loss in %.

Warning threshold of the average ICMP response time in seconds.

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

Ignore notPresent(6)

Ignore down(2) administrative status

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

Preprocessing

• Custom multiplier: 0.01

MIB: FROGFOOT-RESOURCES-MIB

1 minute load average of processor load.

Preprocessing

• Custom multiplier: 0.01

MIB: FROGFOOT-RESOURCES-MIB

15 minute load average of processor load.

Preprocessing

• Custom multiplier: 0.01

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

The total memory expressed in bytes.

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

Memory utilization in %.

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: SNMPv2-MIB

Time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value: any error

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

Physical location of the node (e.g., equipment room, 3rd floor). If not provided, the value is a zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

The system is running out of free memory.

Firmware version has changed. Acknowledge to close the problem manually.

Uptime is less than 10 minutes.

• Ubiquiti AirOS: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Ubiquiti AirOS: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Ubiquiti AirOS: Unavailable by ICMP ping

Average ICMP response time is too high.

• Ubiquiti AirOS: High ICMP ping loss
• Ubiquiti AirOS: Unavailable by ICMP ping

Discovering interfaces from IF-MIB.

Preprocessing

• Discard unchanged with heartbeat: 4h

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface,including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and another times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second.

For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made,

this object should contain the nominal bandwidth.

If the bandwidth of the interface is greater than the maximum value reportable by this object then

this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interface's speed.

For a sub-layer which has no concept of bandwidth, this object should be zero.

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine the context macro to "0", marking this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, does not fire for "eternal off" interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Ubiquiti AirOS: Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Ubiquiti AirOS: Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Ubiquiti AirOS: Interface {#IFNAME}({#IFALIAS}): Link down

Time interval for the SNMP availability trigger.

Warning threshold of ICMP packet loss in %.

Warning threshold of the average ICMP response time in seconds.

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

Ignore notPresent(6)

Ignore down(2) administrative status

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

Preprocessing

• Custom multiplier: 0.01

MIB: FROGFOOT-RESOURCES-MIB

1 minute load average of processor load.

Preprocessing

• Custom multiplier: 0.01

MIB: FROGFOOT-RESOURCES-MIB

15 minute load average of processor load.

Preprocessing

• Custom multiplier: 0.01

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

The total memory expressed in bytes.

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

Memory utilization in %.

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: SNMPv2-MIB

Time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value: any error

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

Physical location of the node (e.g., equipment room, 3rd floor). If not provided, the value is a zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible values:

0 - not available

1 - available

2 - unknown

The system is running out of free memory.

Firmware version has changed. Acknowledge to close the problem manually.

Uptime is less than 10 minutes.

• Ubiquiti AirOS: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Ubiquiti AirOS: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Ubiquiti AirOS: Unavailable by ICMP ping

Average ICMP response time is too high.

• Ubiquiti AirOS: High ICMP ping loss
• Ubiquiti AirOS: Unavailable by ICMP ping

Discovering interfaces from IF-MIB.

Preprocessing

• Discard unchanged with heartbeat: 4h

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface,including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and another times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second.

For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made,

this object should contain the nominal bandwidth.

If the bandwidth of the interface is greater than the maximum value reportable by this object then

this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interface's speed.

For a sub-layer which has no concept of bandwidth, this object should be zero.

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine the context macro to "0", marking this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, does not fire for "eternal off" interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Ubiquiti AirOS: Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Ubiquiti AirOS: Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Ubiquiti AirOS: Interface {#IFNAME}({#IFALIAS}): Link down

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

Ignore notPresent(6)

Ignore down(2) administrative status

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

The total memory expressed in bytes.

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

Memory utilization in %.

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

The CPU utilization is too high. The system might be slow to respond.

The system is running out of free memory.

Firmware version has changed. Acknowledge to close the problem manually.

Uptime is less than 10 minutes.

• Ubiquiti AirOS: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Ubiquiti AirOS: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Ubiquiti AirOS: Unavailable by ICMP ping

• Ubiquiti AirOS: High ICMP ping loss
• Ubiquiti AirOS: Unavailable by ICMP ping

Discovering interfaces from IF-MIB.

Preprocessing

• Discard unchanged with heartbeat: 4h

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface,including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and another times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second.

For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made,

this object should contain the nominal bandwidth.

If the bandwidth of the interface is greater than the maximum value reportable by this object then

this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interface's speed.

For a sub-layer which has no concept of bandwidth, this object should be zero.

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Interface {#IFNAME}({#IFALIAS}): Link down

-

-

-

-

-

-

-

Ignore notPresent(6)

Ignore down(2) administrative status

-

-

-

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

-

Ignore notPresent(6)

-

-

-

Discovering interfaces from IF-MIB.

Filter:

- {#IFADMINSTATUS} MATCHES_REGEX {$NET.IF.IFADMINSTATUS.MATCHES}

- {#IFADMINSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFADMINSTATUS.NOT_MATCHES}

- {#IFOPERSTATUS} MATCHES_REGEX {$NET.IF.IFOPERSTATUS.MATCHES}

- {#IFOPERSTATUS} NOT_MATCHES_REGEX {$NET.IF.IFOPERSTATUS.NOT_MATCHES}

- {#IFNAME} MATCHES_REGEX {$NET.IF.IFNAME.MATCHES}

- {#IFNAME} NOT_MATCHES_REGEX {$NET.IF.IFNAME.NOT_MATCHES}

- {#IFDESCR} MATCHES_REGEX {$NET.IF.IFDESCR.MATCHES}

- {#IFDESCR} NOT_MATCHES_REGEX {$NET.IF.IFDESCR.NOT_MATCHES}

- {#IFTYPE} MATCHES_REGEX {$NET.IF.IFTYPE.MATCHES}

- {#IFTYPE} NOT_MATCHES_REGEX {$NET.IF.IFTYPE.NOT_MATCHES}

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 12h

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Total memory in Bytes.

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo).

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo).

Preprocessing:

- MULTIPLIER: 1024

Memory utilization in %.

Expression:

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface,including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and atother times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

- MULTIPLIER: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second.

For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made,

this object should contain the nominal bandwidth.

If the bandwidth of the interface is greater than the maximum value reportable by this object then

this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interface's speed.

For a sub-layer which has no concept of bandwidth, this object should be zero.

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing:

- CHECK_NOT_SUPPORTED

⛔️ON_FAIL: CUSTOM_VALUE -> 0

- MULTIPLIER: 0.01

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

-

-

-

CPU utilization is too high. The system might be slow to respond.

System name has changed. Ack to close.

Manual close: YES

Firmware version has changed. Ack to close

Manual close: YES

The system is running out of free memory.

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {$IFCONTROL:"{#IFNAME}"}=1 - user can redefine Context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.

3. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

The network interface utilization is close to its estimated maximum bandwidth.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFDESCR}: Link down

Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFDESCR}: Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Ack to close.

Recovery expression:

Manual close: YES

Depends on:

- Interface {#IFDESCR}: Link down

Uptime is less than 10 minutes.

Manual close: YES

Depends on:

- No SNMP data collection

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Depends on:

- Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

-

Depends on:

- Unavailable by ICMP ping

-

Depends on:

- High ICMP ping loss

- Unavailable by ICMP ping

Filter out loopbacks, nulls, docker veth links and docker0 bridge by default

Ignore notPresent(6)

Ignore down(2) administrative status

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

The total memory expressed in bytes.

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo).

Preprocessing

• Custom multiplier: 1024

Memory utilization in %.

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: SNMPv2-MIB

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

Preprocessing

• Custom multiplier: 0.01

MIB: HOST-RESOURCES-MIB

The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.

Preprocessing

• Check for not supported value

  ⛔️Custom on fail: Set value to: 0

• Custom multiplier: 0.01

The item is used to collect all SNMP traps unmatched by other snmptrap items

MIB: SNMPv2-MIB

The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determiningwhat kind of box' is being managed. For example, if vendorFlintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

Preprocessing

• Discard unchanged with heartbeat: 12h

MIB: SNMPv2-MIB

A textual description of the entity. This value should

include the full name and version identification of the system's hardware type, software operating-system, and

networking software.

Preprocessing

• Discard unchanged with heartbeat: 12h

Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.

Possible value:

0 - not available

1 - available

2 - unknown

The CPU utilization is too high. The system might be slow to respond.

The system is running out of free memory.

Firmware version has changed. Acknowledge to close the problem manually.

Uptime is less than 10 minutes.

• Ubiquiti AirOS: No SNMP data collection

The name of the system has changed. Acknowledge to close the problem manually.

SNMP is not available for polling. Please check device connectivity and SNMP settings.

• Ubiquiti AirOS: Unavailable by ICMP ping

Last three attempts returned timeout. Please check device connectivity.

• Ubiquiti AirOS: Unavailable by ICMP ping

• Ubiquiti AirOS: High ICMP ping loss
• Ubiquiti AirOS: Unavailable by ICMP ping

Discovering interfaces from IF-MIB.

Preprocessing

• Discard unchanged with heartbeat: 4h

MIB: IF-MIB

The current operational state of the interface.

- The testing(3) state indicates that no operational packet scan be passed

- If ifAdminStatus is down(2) then ifOperStatus should be down(2)

- If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic

- It should change todormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection)

- It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state

- It should remain in the notPresent(6) state if the interface has missing(typically, hardware) components.

MIB: IF-MIB

The total number of octets received on the interface,including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and another times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

• Custom multiplier: 8

MIB: IF-MIB

For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

For packet-oriented interfaces, the number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of outbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of outbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The number of inbound packets which were chosen to be discarded

even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.

One possible reason for discarding such a packet could be to free up buffer space.

Discontinuities in the value of this counter can occur at re-initialization of the management system,

and at other times as indicated by the value of ifCounterDiscontinuityTime.

Preprocessing

• Change per second

MIB: IF-MIB

The type of interface.

Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA),

through updating the syntax of the IANAifType textual convention.

Preprocessing

• Discard unchanged with heartbeat: 1d

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second.

For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made,

this object should contain the nominal bandwidth.

If the bandwidth of the interface is greater than the maximum value reportable by this object then

this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interface's speed.

For a sub-layer which has no concept of bandwidth, this object should be zero.

This trigger expression works as follows:
1. It can be triggered if the operations status is down.
2. {$IFCONTROL:"{#IFNAME}"}=1 - a user can redefine context macro to value - 0. That marks this interface as not important. No new trigger will be fired if this interface is down.
3. {TEMPLATE_NAME:METRIC.diff()}=1 - the trigger fires only if the operational status was up to (1) sometime before (so, do not fire for the 'eternal off' interfaces.)

WARNING: if closed manually - it will not fire again on the next poll, because of .diff.

The utilization of the network interface is close to its estimated maximum bandwidth.

• Interface {#IFNAME}({#IFALIAS}): Link down

It recovers when it is below 80% of the {$IF.ERRORS.WARN:"{#IFNAME}"} threshold.

• Interface {#IFNAME}({#IFALIAS}): Link down

This Ethernet connection has transitioned down from its known maximum speed. This might be a sign of autonegotiation issues. Acknowledge to close the problem manually.

• Interface {#IFNAME}({#IFALIAS}): Link down

-

-

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Total memory in Bytes

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo)

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo)

Preprocessing:

- MULTIPLIER: 1024

Memory utilization in %

Expression:

CPU utilization is too high. The system might be slow to respond.

Firmware version has changed. Ack to close

Manual close: YES

The system is running out of free memory.

-

-

MIB: FROGFOOT-RESOURCES-MIB

5 minute load average of processor load.

MIB: IEEE802dot11-MIB

A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: IEEE802dot11-MIB

Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1d

MIB: FROGFOOT-RESOURCES-MIB

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Total memory in Bytes

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by kernel buffers (Buffers in /proc/meminfo)

Preprocessing:

- MULTIPLIER: 1024

MIB: FROGFOOT-RESOURCES-MIB

Memory used by the page cache and slabs (Cached and Slab in /proc/meminfo)

Preprocessing:

- MULTIPLIER: 1024

Memory utilization in %

Expression:

CPU utilization is too high. The system might be slow to respond.

Firmware version has changed. Ack to close

Manual close: YES

The system is running out of free memory.