This is the documentation page for an unsupported version of Zabbix.
Is this not what you were looking for? Switch to the current version or choose one from the drop-down menu.

11 Performance tuning

This is a work in progress.

Overview

It is very important to have Zabbix system properly tuned for maximum performance.

Hardware

General advice on hardware:

  • Use fastest processor available
  • SCSI or SAS is better than IDE (performance of IDE disks may be significantly improved by using utility hdparm) and SATA
  • 15K RPM is better than 10K RPM which is better than 7200 RPM
  • Use fast RAID storage
  • Use fast Ethernet adapter
  • Having more memory is always better

Operating system

  • Use latest (stable!) version of OS
  • Exclude unnecessary functionality from kernel
  • Tune kernel parameters

Zabbix configuration parameters

Many parameters may be tuned to get optimal performance.

zabbix_server

StartPollers

General rule - keep value of this parameter as low as possible. Every additional instance of zabbix_server adds known overhead, in the same time, parallelism is increased. Optimal number of instances is achieved when queue, on average, contains minimum number of parameters (ideally, 0 at any given moment). This value can be monitored by using internal check zabbix[queue].

See the "See also" section at the bottom of this page to find out how to configure optimal count of zabbix processes.

DebugLevel

Optimal value is 3.

DBSocket

MySQL only. It is recommended to use DBSocket for connection to the database. That is the fastest and the most secure way.

Database engine

This is probably the most important part of Zabbix tuning. Zabbix heavily depends on the availability and performance of database engine.

  • use fastest database engine, i.e. MySQL or PostgreSQL
  • use stable release of a database engine
  • rebuild MySQL or PostgreSQL from sources to get maximum performance
  • follow performance tuning instructions taken from MySQL or PostgreSQL documentation
  • for MySQL, use InnoDB table structure
  • ZABBIX works at least 1.5 times faster (comparing to MyISAM) if InnoDB is used. This is because of increased parallelism. However, InnoDB requires more CPU power.
  • tuning the database server for the best performance is highly recommended.
  • keep database tables on different hard disks
  • 'history', 'history_str, 'items' 'functions', triggers', and 'trends' are most heavily used tables.
  • for large installations keeping MySQL temporary files in tmpfs is:

GUI debugging

Problems related to the frontend performance may be diagnosed using the frontend debug mode.

General advice

  • monitor required parameters only
  • tune 'Update interval' for all items. Keeping a small update interval may be good for nice graphs, however, this may overload Zabbix
  • tune parameters for default templates
  • tune housekeeping parameters
  • do not monitor parameters which return the same information.
  • avoid the use of triggers with long period given as function argument. For example, max(3600) will be calculated significantly slower than max(60).

Viewing Zabbix process performance with "ps" and "top"

Since Zabbix 2.2 processes change their commandlines to display current activity and meaningful statistics, like:

UID        PID  PPID  C STIME TTY      TIME CMD
       zabbix22  4584     1  0 14:55 ?    00:00:00 zabbix_server -c /home/zabbix22/zabbix_server.conf
       zabbix22  4587  4584  0 14:55 ?    00:00:00 zabbix_server: configuration syncer [synced configuration in 0.041169 sec, idle 60 sec]
       zabbix22  4588  4584  0 14:55 ?    00:00:00 zabbix_server: db watchdog [synced alerts config in 0.018748 sec, idle 60 sec]
       zabbix22  4608  4584  0 14:55 ?    00:00:00 zabbix_server: timer #1 [processed 3 triggers, 0 events in 0.007867 sec, 0 maint.periods in 0.005677 sec, idle 30 sec]
       zabbix22  4609  4584  0 14:55 ?    00:00:00 zabbix_server: timer #2 [processed 2 triggers, 0 events in 0.004209 sec, idle 30 sec]
       zabbix22  4637  4584  0 14:55 ?    00:00:01 zabbix_server: history syncer #4 [synced 35 items in 0.166198 sec, idle 5 sec]
       zabbix22  4657  4584  0 14:55 ?    00:00:00 zabbix_server: vmware collector #1 [updated 0, removed 0 VMware services in 0.000004 sec, idle 5 sec]
       zabbix22  4670     1  0 14:55 ?    00:00:00 zabbix_proxy -c /home/zabbix22/zabbix_proxy.conf
       zabbix22  4673  4670  0 14:55 ?    00:00:00 zabbix_proxy: configuration syncer [synced config 15251 bytes in 0.111861 sec, idle 60 sec]
       zabbix22  4674  4670  0 14:55 ?    00:00:00 zabbix_proxy: heartbeat sender [sending heartbeat message success in 0.013643 sec, idle 30 sec]
       zabbix22  4688  4670  0 14:55 ?    00:00:00 zabbix_proxy: icmp pinger #1 [got 1 values in 1.811128 sec, idle 5 sec]
       zabbix22  4690  4670  0 14:55 ?    00:00:00 zabbix_proxy: housekeeper [deleted 9870 records in 0.233491 sec, idle 3599 sec]
       zabbix22  4701  4670  0 14:55 ?    00:00:08 zabbix_proxy: http poller #2 [got 1 values in 0.024105 sec, idle 1 sec]
       zabbix22  4707  4670  0 14:55 ?    00:00:00 zabbix_proxy: history syncer #4 [synced 22 items in 0.008565 sec, idle 5 sec]
       zabbix22  4738     1  0 14:55 ?    00:00:00 zabbix_agentd -c /home/zabbix22/zabbix_agentd.conf
       zabbix22  4739  4738  0 14:55 ?    00:00:00 zabbix_agentd: collector [idle 1 sec]
       zabbix22  4740  4738  0 14:55 ?    00:00:00 zabbix_agentd: listener #1 [waiting for connection]
       zabbix22  4741  4738  0 14:55 ?    00:00:00 zabbix_agentd: listener #2 [processing request]

The main process is an exception. Instead of current activity the original commandline is shown. This helps to distinguish processes on systems with multiple Zabbix instances.

This feature is not implemented for Microsoft Windows.

If logging level is set to DebugLevel=4 these activity and statistics messages are also written into log file.

Linux

On Linux systems ps command can be used together with watch command for observing how Zabbix is doing. For example, to run ps command 5 times per second to see process activities:

watch -n 0.2 ps -fu zabbix

To show only Zabbix proxy and agent processes:

watch -tn 0.2 'ps -f -C zabbix_proxy -C zabbix_agentd'

To show only history syncer processes:

watch -tn 0.2 'ps -fC zabbix_server | grep history'

The ps command produces a wide output (approximately 190 columns) as some activity messages are long. If your terminal has less than 190 columns of text you can try

watch -tn 0.2 'ps -o cmd -C zabbix_server -C zabbix_proxy -C zabbix_agentd'

to display only commandlines without UID, PID, start time etc.

top command also can be used for observing Zabbix performance. Pressing 'c' key in top shows processes with their commandlines. In our tests on Linux top and atop correctly displayed changing activities of Zabbix processes, but htop was not displaying changing activities.

BSD systems

If watch command is not installed, a similar effect can be achieved with

while [ 1 ]; do ps x; sleep 0.2; clear; done
AIX, HP-UX

If watch command is not available, one can try

while [ 1 ]; do ps -fu zabbix; sleep 1; clear; done
Solaris

By default the ps command does not show changing activities. One option is to use /usr/ucb/ps instead. If watch command is not installed, a periodically updated list of processes can be shown with

while [ 1 ]; do /usr/ucb/ps gxww; sleep 1; clear; done

On Solaris 11:

  • /usr/ucb/ps is not installed by default. You may need to install ucb package, e.g. pkg install compatibility/ucb,
  • if Zabbix daemon has been started by privileged user its activities are not shown to non-privileged user.
  • the sleep command accepts not only whole seconds but also fractions of second (e.g. sleep 0.2).

See also

  1. How to configure optimal count of zabbix processes