This is a translation of the original English documentation page. Help us make it better.

3 Authentication

Overview

In Administration → Authentication the user authentication method to Zabbix can be changed. The available methods are internal, LDAP and HTTP authentication.

By default, internal Zabbix authentication is used. To change, click on the button with the method name and press Update.

Internal

Internal Zabbix authentication is used.

LDAP

External LDAP authentication can be used to check user names and passwords. Note that a user must exist in Zabbix as well, however its Zabbix password will not be used.

Zabbix LDAP authentication works at least with Microsoft Active Directory and OpenLDAP.

Configuration parameters:

Parameter Description
LDAP host Name of LDAP server. For example: ldap://ldap.zabbix.com
For secure LDAP server use ldaps protocol.
ldaps://ldap.zabbix.com
With OpenLDAP 2.x.x and later, a full LDAP URI of the form ldap://hostname:port or ldaps://hostname:port may be used.
Port Port of LDAP server. Default is 389.
For secure LDAP connection port number is normally 636.
Not used when using full LDAP URIs.
Base DN Base path to search accounts:
ou=Users,ou=system (for OpenLDAP),
DC=company,DC=com (for Microsoft Active Directory)
Search attribute LDAP account attribute used for search:
uid (for OpenLDAP),
sAMAccountName (for Microsoft Active Directory)
Bind DN LDAP account for binding and searching over the LDAP server, examples:
uid=ldap_search,ou=system (for OpenLDAP),
CN=ldap_search,OU=user_group,DC=company,DC=com (for Microsoft Active Directory)

Required, anonymous binding is not supported.
Bind password LDAP password of the account for binding and searching over the LDAP server.
Test authentication Header of a section for testing
Login Name of a test user (which is currently logged in the Zabbix frontend). This user name must exist in the LDAP server.
Zabbix will not activate LDAP authentication if it is unable to authenticate the test user.
User password LDAP password of the test user.

In case of trouble with certificates, to make a secure LDAP connection (ldaps) work you may need to add a TLS_REQCERT allow line to the /etc/openldap/ldap.conf configuration file. It may decrease the security of connection to the LDAP catalog.

It is recommended to create a separate LDAP account (Bind DN) to perform binding and searching over the LDAP server with minimal privileges in the LDAP instead of using real user accounts (used for logging in the Zabbix frontend).
Such an approach provides more security and does not require changing the Bind password when the user changes his own password in the LDAP server.
In the table above it's ldap_search account name.

Some user groups can still be authenticated by Zabbix. These groups must have frontend access set to Internal.

HTTP

Apache-based (HTTP) authentication can be used to check user names and passwords. Note that a user must exist in Zabbix as well, however its Zabbix password will not be used.

Be careful! Make sure that Apache authentication is configured and works properly before switching it on.

In case of Apache authentication all users (even with frontend access set to Internal) will be authenticated by Apache, not by Zabbix!

Setting up the identity provider

In order to work with Zabbix, a SAML identity provider (onelogin.com, auth0.com, okta.com, etc.) needs to be configured in the following way:

  • Assertion Consumer URL should be set to <path_to_zabbix_ui>/index_sso.php?acs
  • Single Logout URL should be set to <path_to_zabbix_ui>/index_sso.php?sls

<path_to_zabbix_ui> examples: %% https://example.com/zabbix/ui, http://another.example.com/zabbix, http://<any_public_ip_address>/zabbix %%

Setting up Zabbix

It is required to install php-openssl if you want to use SAML authentication in the frontend.

To use SAML authentication Zabbix should be configured in the following way:

1. Private key and certificate should be stored in the // ui/conf/certs///, unless custom paths are provided in zabbix.conf.php.

By default, Zabbix will look in the following locations:

  • ui/conf/certs/sp.key - SP private key file
  • ui/conf/certs/sp.crt - SP cert file
  • ui/conf/certs/idp.crt - IDP cert file

2. All of the most important settings can be configured in the Zabbix frontend. However, it is possible to specify additional settings in the configuration file.

Configuration parameters, available in the Zabbix frontend:

Parameter Description
Enable SAML authentication Mark the checkbox to enable SAML authentication.
IDP entity ID The unique identifier of SAML identity provider.
SSO service URL The URL users will be redirected to when logging in.
SLO Service URL The URL users will be redirected to when logging out. If left empty, the SLO service will not be used.
// Username attribute// SAML attribute to be used as a username when logging into Zabbix.
List of supported values is determined by the identity provider.

Examples:
uid
userprincipalname
samaccountname
username
userusername
urn:oid:0.9.2342.19200300.100.1.1
urn:oid:1.3.6.1.4.1.5923.1.1.1.13
urn:oid:0.9.2342.19200300.100.1.44
SP entity ID The unique identifier of SAML service provider.
SP name ID format Defines which name identifier format should be used.

Examples:
urn:oasis:names:tc:SAML:2.0:nameid-format:persistent
urn:oasis:names:tc:SAML:2.0:nameid-format:transient
urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos
urn:oasis:names:tc:SAML:2.0:nameid-format:entity
Sign Mark the checkboxes to select entities for which SAML signature should be enabled:
Messages
Assertions
AuthN requests
Logout requests
Logout responses
Encrypt Mark the checkboxes to select entities for which SAML encryption should be enabled:
Assertions
Name ID
Case-sensitive login Mark the checkbox to enable case-sensitive login (disabled by default) for usernames.
E.g. disable case-sensitive login and log in with, for example, 'ADMIN' user even if the Zabbix user is 'Admin'.
Note that with case-sensitive login disabled the login will be denied if multiple users exist in Zabbix database with similar alias (e.g. Admin, admin).
Advanced settings

Additional SAML parameters can be configured in the Zabbix frontend configuration file (zabbix.conf.php):

  • $SSO['SP_KEY'] = '<path to the SP private key file>';
  • $SSO['SP_CERT'] = '<path to the SP cert file>';
  • $SSO['IDP_CERT'] = '<path to the IDP cert file>';
  • $SSO['SETTINGS']

Zabbix uses OneLogin's SAML PHP Toolkit library (version 3.4.1). The structure of $SSO['SETTINGS'] section should be similar to the structure used by the library. For the description of configuration options, see official library documentation.

Only the following options can be set as part of $SSO['SETTINGS']:

  • strict
  • baseurl
  • compress
  • contactPerson
  • organization
  • sp (only options specified in this list)
    • attributeConsumingService
    • x509certNew
  • idp (only options specified in this list)
    • singleLogoutService (only one option)
      • responseUrl
    • certFingerprint
    • certFingerprintAlgorithm
    • x509certMulti
  • security (only options specified in this list)
    • signMetadata
    • wantNameId
    • requestedAuthnContext
    • requestedAuthnContextComparison
    • wantXMLValidation
    • relaxDestinationValidation
    • destinationStrictlyMatches
    • rejectUnsolicitedResponsesWithInResponseTo
    • signatureAlgorithm
    • digestAlgorithm
    • lowercaseUrlencoding

All other options will be taken from the database and cannot be overridden. The debug option will be ignored.

In addition, if Zabbix UI is behind a proxy or a load balancer, the custom use_proxy_headers option can be used:

  • false (default) - ignore the option;
  • true - use X-Forwarded-* HTTP headers for building the base URL.

Configuration example:

$SSO['SETTINGS'] = [
           'security' => [
               'signatureAlgorithm' => 'http://www.w3.org/2001/04/xmldsig-more#rsa-sha384'
               'digestAlgorithm' => 'http://www.w3.org/2001/04/xmldsig-more#sha384',
               // ...
           ],
           // ...
       ];