Synology Inc. is a Taiwanese corporation that specializes in Network-attached storage appliances. Synology’s line of NAS is known as the DiskStation for desktop models, FlashStation for all-flash models, and RackStation for rack-mount models.
Vendor and Community integrations are created by third parties and are not verified by Zabbix. Zabbix is not responsible for their functionality or quality.
Based on the Synology DiskStation template.SHA authpass and AES privpass are hardcodedDiskStationManager > Terminal SNMP > SNMP > Enable SNMPv3 set all valuesZabbix > Template > Macros > set Username, Passwort and PrivacyPasswort2020 April: fixed https://github.com/kko/unifi-zabbix-snmpv3/issues/4
Template is based on Synology DiskStation MIB Guide (published:2017/09/19)
Template is based on Synology MIB Guide and monitor only an Synology HA ClusterIs based on snmp v2 data from section Synology SHA MIBInstallation notesDon´t forget to set the right community name in template Macros sectionBefore add to host set/add in Zabbix-> Administration -> General -> Value mappingSynology Cluster Status0 ⇒ normal1 ⇒ warning2 ⇒ critical3 ⇒ upgrading4 ⇒ processingSynology Heartbeat Status0 ⇒ normal1 ⇒ abnormal2 ⇒ disconnected3 ⇒ emptySynology AutoFailover1 ⇒ True2 ⇒ FalseFeaturesItems are explained in detailsTriggers are explained and contain tags to show the problem details depending on received valueEnvironmentCreated and tested with:Synology DSM 6.2-24922on following models:RS820RP+Zabbix version 4.0.0Note(s)You can write questions also to [email protected] to read when will deploy Synology HA environment this Synology HA White Paper
All processes are described here:https://github.com/tudorticau/Synology-Backup-LLD-MonitorFirst step: setup syslogserverSecond: configure zabbix to monitor using LLDAll is tested and already implemented on production: over 40 NASTemplate have 1 item and 1 trigger, but is LLD - this mean you don´t have to take care how your admins will add and name the backup processes: all is done automatically
Attention: TESTED only on 5.4.x. Please give me info if it works correctly on 5.0 too.
5
L'objectif de ces scripts est de monitorer le statut d'un Synology passive server et de ses disques dans un context de 2 Synology configurés en HA (Active/Passive).
1
7
