Zabbix + Synology

Based on the Synology DiskStation template.SHA authpass and AES privpass are hardcodedDiskStationManager > Terminal SNMP > SNMP > Enable SNMPv3 set all valuesZabbix > Template > Macros > set Username, Passwort and PrivacyPasswort2020 April: fixed https://github.com/kko/unifi-zabbix-snmpv3/issues/4

Template is based on Synology DiskStation MIB Guide (published:2017/09/19)

Template is based on Synology MIB Guide and monitor only an Synology HA ClusterIs based on snmp v2 data from section Synology SHA MIBInstallation notesDon´t forget to set the right community name in template Macros sectionBefore add to host set/add in Zabbix-> Administration -> General -> Value mappingSynology Cluster Status0 ⇒ normal1 ⇒ warning2 ⇒ critical3 ⇒ upgrading4 ⇒ processingSynology Heartbeat Status0 ⇒ normal1 ⇒ abnormal2 ⇒ disconnected3 ⇒ emptySynology AutoFailover1 ⇒ True2 ⇒ FalseFeaturesItems are explained in detailsTriggers are explained and contain tags to show the problem details depending on received valueEnvironmentCreated and tested with:Synology DSM 6.2-24922on following models:RS820RP+Zabbix version 4.0.0Note(s)You can write questions also to [email protected] to read when will deploy Synology HA environment this Synology HA White Paper

All processes are described here:https://github.com/tudorticau/Synology-Backup-LLD-MonitorFirst step: setup syslogserverSecond: configure zabbix to monitor using LLDAll is tested and already implemented on production: over 40 NASTemplate have 1 item and 1 trigger, but is LLD - this mean you don´t have to take care how your admins will add and name the backup processes: all is done automatically

L'objectif de ces scripts est de monitorer le statut d'un Synology passive server et de ses disques dans un context de 2 Synology configurés en HA (Active/Passive).