| Link |
Source |
Compatibility |
Type, Technology |
Created Updated |
Rating |
UPS RFC 1628 SNMP
There is a UPS SNMP template for UPS with rfc-1628 support. Tested with:APC SURTD3000XLI with APC Network Management Card 2 (AP9630)APC SRT3000RMXLI with APC Network Management Card 2 (AP9630)EATON (PowerWare) 9125-6000g with ConnectUPS Web/SNMP Card.
template_universal_ups_snmp_(rfc-1628)
|
SNMP APC PDU
UPDATE: Uploaded V2 to fix one of the power ratings that was the wrong OID. It was collecting watts incorrectly. All fixed now!This APC Template contains outlet discovery and should work with any managed or switched APC PDU.Contains sane triggers, load status, graphs, etc.Triggers: APC Load State, Load
...
template_apc_pdu_new_snmp
|
APC InRow Cooling
This template is for use with APC InRow Cooling Units. There are 4 Applications, 25 Items, 6 Triggers, and 3 Graphs.Applications:InformationReturn SideSupply SideThresholdsItems:AirflowCondensate Pump Run hoursCooling Demand PowerCooling output PowerCool Set PointDehumidify/OutputDew PointDischarge PressureFan
...
template_apc_inrow_cooling_snmp
|
APC Netbotz AP9340
I made a simple template for the APC Netbotz AP9340, i currently have 2 (RJ45) temperature sensors connected and retrieving the temp and humidity from both.
template_apc_netbotz_ap9340
|
APC NetBotz Rack Monitor 200
LLD of Sensors (Currently Temperature and Humidity & Wireless Tempurature and Humidity)Trigger Prototypes for recommended Humidity and Tempurature based on Netbotz configured thresholdsGraph Prototypes for Temperature and Humidity
template_apc_netbotz_monitor_2xx
|
SNMP APC NetBotz Rack Monitor 200
LLD of Sensors (Only Temperature and humidity)Trigger Prototypes for recommended 45RH% - 55RH% humidity and 20°C - 24°C TemperatureGraph Prototypes for Temperature and Humidity.Triggers names contain the last value that cause the trigger so you can see the temp/hum in the alert.
template_apc_netbotz_rack_monitor_200
|
SNMP APC InRow
template_apc_inrow
|
SNMP APC PDU AP79XX
The template is a reworked a version of APC PDU New SNMP Template to suit the needs of our AP7953.Contains sane triggers, load status, graphs, etc.The template monitors both load banks, status of the alarms, and changes in the port status (on/off)
template_apc_pdu_ap7953
|
APC PDU
I have created a very detailed template for a Rack Mounted APC PDU. I spent a considerable amount of time digging through the MIB to obtain all the correct OID numbers pertaining to each Item for the PDU to use with SNMP. The template includes:7 Applications:EnviornmentInformationOutletsPeaksPhasesPowerThresholds39
...
template_apc_pdu_detailed
|
Template_APC_NMC2
template_apc_network_management_card_2
|
APC Smart-UPS
This template covers basic monitoring with some triggers.I use it on a Windows Server 2016 with PowerChute Business Edition installed.Feel free to modify this template to meet your needs.Configure PowerChute Business Edition to use SNMP v1 with Community "public".The following applications, triggers
...
template_apc_smart-ups_750
|
APC Smart-UPS through apcupsd and ssh
This template is for situation when you have apcupsd, but cannot install zabbix agent. Tested with Centos 6.x.You have to install apcupsd and configure it, configure ssh access for user by certificate.Provides:Items: model, serial number, number of switching (xfers), name (set in apcupsd config), status
...
template_apc_smart-ups_through_apcupsd_and_ssh
|
APC NMC 2 AP9619
This template was originaly created for the AP9619 card, but in version 2 now support more UPS´s.Tested on:APC Symmetra PX40 3Phase UPSAPC Smart-UPS VT 20kVA 3Phase UPSSmart-UPS RT 7500 RM XLand more...It gathers input and output values from all three phases. I tried to make it as universal as i could
...
template_apc_ups_nmc_2_ap9619
|
APC Windows agent monitor
universal template for windows APC Agent (APCPBEAgent) PC PowerChute Business Edition Agentfrom eventid logsIn Russian with comments in EnglishAlerts:about switching to battery with event closingwhen switching to a networkon compensation for increasing voltage in the network with the closing of the eventon
...
template_apc_windows_agent_monitor
|
APCUPSd
Monitoring APC UPS (without SNMP) through APCUPSd.Russian language.Мониторинг ИБП APC (без SNMP) через APCUPSd.На русском языке.Переменные:ИмяТекущий статусУровень заряда батареиВнутренняя температураНапряжение на входеУровень нагрузкиУровень чувствительностиКоличество переходов на питание от батареи
...
template_apcupsd
|
APC ATS
APC ATS TemplateModel : AP4423Update APC To the Last Version. otherwise Snmpget wouldnt work fine.
template_ats_ap4423
|
Nobreak-APC-SMART-UPS-3000BI-BR
## In English:Template for Zabbix 3.4 and above.Collects and displays information about voltage, current, power, status, temperature, and battery usage.UPS MIB: http://www.oidview.com/mibs/0/UPS-MIB.htmlSoftware SGM Auto-Shutdown V4.1:http://www.apc.com/shop/br/pt/products/Software-SGM-Auto-Shutdown-V4-1-para-Linux-s%C3%B3-Brasil-/P-SFSGM41L?isCurrentSite=trueDashboard
...
template_nobreak-apc-smart-ups-3000bi-br
|
Template_APC_Monitor_RackPDU
template_rack_pdu
|
Zabbix template for monitoring process apcupsd
github.com/cavazquez/zabbix_template_apcupsd
|
Template for zabbix to get APC PDU infos
github.com/magaiverpr/template-zabbix-apc-pdu
|
APC UPS RS 1500
github.com/jhonespetter/zabbix-apc-ups-rs1500
[pt]
|
Zabbix Template APC Smart UPS
github.com/spions/zabbix_APC_Smart_UPS
|
github.com/daftu/zabbix_apc_template
|
A template for Zabbix to collect temperature and humidity from an APC AP9619
github.com/ptudor/apc-ap9619-zabbix
|
Автообнаружение в zabbix UPS помощью BASH скриптов, UDEV и их мониторинг через apcupsd
github.com/viktor-gorinskiy/apcupsd_zabbix
[ru]
|
6
