Filter of discoverable interfaces by admin status.

1 - Up

2 - Down

3 - Testing

Filter to exclude discovered interfaces by admin status.

Filter triggers by discoverable interface names.

Used in overrides. Triggers will only be created for interfaces whose names contain the value of the macro.

Filter by discoverable interface description.

Filter to exclude discovered interfaces by description.

Filter by discoverable interface names.

Filter to exclude discovered interfaces by name.

-

-

The time interval for SNMP agent availability trigger expression.

Discovery of cpmCPUTotalTable, a table of CPU monitoring entries.

Network interfaces discovery

Filter:

- {#CISCO.IF.NAME} MATCHES_REGEX {$CISCO.LLD.FILTER.IF.NAME.MATCHES}

- {#CISCO.IF.NAME} NOT_MATCHES_REGEX {$CISCO.LLD.FILTER.IF.NAME.NOT_MATCHES}

- {#CISCO.IF.STATUS.ADMIN} MATCHES_REGEX {$CISCO.LLD.FILTER.IF.ADMIN.MATCHES}

- {#CISCO.IF.STATUS.ADMIN} NOT_MATCHES_REGEX {$CISCO.LLD.FILTER.IF.ADMIN.NOT_MATCHES}

- {#CISCO.IF.DESC} MATCHES_REGEX {$CISCO.LLD.FILTER.IF.DESC.MATCHES}

- {#CISCO.IF.DESC} NOT_MATCHES_REGEX {$CISCO.LLD.FILTER.IF.DESC.NOT_MATCHES}

Overrides:

Don't create triggers for matching interface
- {#CISCO.IF.NAME} NOT_MATCHES_REGEX {$CISCO.LLD.FILTER.IF.CONTROL.MATCHES}
- TRIGGER_PROTOTYPE REGEXP .* - NO_DISCOVER

Discovery of ciscoMemoryPoolTable, a table of memory pool monitoring entries.

Information about a particular physical entity.

Remote access session discovery

MIB: CISCO-PROCESS-MIB

The overall CPU busy percentage in the last 5 minute

period. This object deprecates the object cpmCPUTotal5min

and increases the value range to (0..100).

MIB: RFC1213-MIB

A textual description of the entity. This value

should include the full name and version

identification of the system's hardware type,

software operating-system, and networking

software. It is mandatory that this only contain

printable ASCII characters.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: RFC1213-MIB

The textual identification of the contact person

for this managed node, together with information

on how to contact this person.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: RFC1213-MIB

An administratively-assigned name for this

managed node. By convention, this is the node's

fully-qualified domain name.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: RFC1213-MIB

The physical location of this node (e.g.,

telephone closet, 3rd floor').</p> |SNMP |cisco.asav.location<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:6h`

MIB: ENTITY-MIB

A textual description of physical entity. This object

should contain a string that identifies the manufacturer's

name for the physical entity, and should be set to a

distinct value for each version or model of the physical

entity.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: ENTITY-MIB

An indication of the general hardware type of the physical

entity.

An agent should set this object to the standard enumeration

value that most accurately indicates the general class of

the physical entity, or the primary class if there is more

than one entity.

If no appropriate standard registration identifier exists

for this physical entity, then the value 'other(1)' is

returned. If the value is unknown by this agent, then the

value 'unknown(2)' is returned.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: ENTITY-MIB

The textual name of the physical entity. The value of this

object should be the name of the component as assigned by

the local device and should be suitable for use in commands

entered at the device's console'. This might be a text</p><p>name (e.g.,console') or a simple component number (e.g.,

port or module number, such as 1'), depending on the</p><p>physical component naming syntax of the device.</p><p>If there is no local name, or if this object is otherwise</p><p>not applicable, then this object contains a zero-length</p><p>string.</p><p>Note that the value of entPhysicalName for two physical</p><p>entities will be the same in the event that the console</p><p>interface does not distinguish between them, e.g., slot-1</p><p>and the card in slot-1.</p> |SNMP |cisco.asav.phys.name[{#SNMPINDEX}]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT:6h`

MIB: ENTITY-MIB

The vendor-specific hardware revision string for the

physical entity. The preferred value is the hardware

revision identifier actually printed on the component itself

(if present).

Note that if revision information is stored internally in a

non-printable (e.g., binary) format, then the agent must

convert such information to a printable format, in an

implementation-specific manner.

If no specific hardware revision string is associated with

the physical component, or if this information is unknown to

the agent, then this object will contain a zero-length

string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: ENTITY-MIB

The vendor-specific software revision string for the

physical entity.

Note that if revision information is stored internally in a

non-printable (e.g., binary) format, then the agent must

convert such information to a printable format, in an

implementation-specific manner.

If no specific software programs are associated with the

physical component, or if this information is unknown to the

agent, then this object will contain a zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: ENTITY-MIB

The vendor-specific serial number string for the physical

entity. The preferred value is the serial number string

actually printed on the component itself (if present).

On the first instantiation of an physical entity, the value

of entPhysicalSerialNum associated with that entity is set

to the correct vendor-assigned serial number, if this

information is available to the agent. If a serial number

is unknown or non-existent, the entPhysicalSerialNum will be

set to a zero-length string instead.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: ENTITY-MIB

The name of the manufacturer of this physical component.

The preferred value is the manufacturer name string actually

printed on the component itself (if present).

Note that comparisons between instances of the

entPhysicalModelName, entPhysicalFirmwareRev,

entPhysicalSoftwareRev, and the entPhysicalSerialNum

objects, are only meaningful amongst entPhysicalEntries with

the same value of entPhysicalMfgName.

If the manufacturer name string associated with the physical

component is unknown to the agent, then this object will

contain a zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: ENTITY-MIB

The vendor-specific model name identifier string associated

with this physical component. The preferred value is the

customer-visible part number, which may be printed on the

component itself.

If the model name string associated with the physical

component is unknown to the agent, then this object will

contain a zero-length string.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-MEMORY-POOL-MIB

Indicates the number of bytes from the memory pool that are currently in use by applications on the managed device.

Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html

MIB: CISCO-MEMORY-POOL-MIB

Indicates the number of bytes from the memory pool that are currently unused on the managed device. Note that the sum of ciscoMemoryPoolUsed and ciscoMemoryPoolFree is the total amount of memory in the pool

Reference: http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/15216-contiguous-memory.html

Memory utilization in %.

Expression:

MIB: CISCO-PORT-MIB

Descriptive name that identifies this port.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: IF-MIB

A textual string containing information about the interface

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: IF-MIB

The current operational state of the interface.

The testing(3) state indicates that no operational

packets can be passed.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: IF-MIB

The desired state of the interface. The

testing(3) state indicates that no operational

packets can be passed.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: IF-MIB

The total number of octets received on the interface,

including framing characters.

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were not addressed to a multicast

or broadcast address at this sub-layer

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer. For a MAC layer protocol, this

includes both Group and Functional addresses.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The total number of octets transmitted out of the

interface, including framing characters. This object is a

64-bit version of ifOutOctets.

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were not addressed to a

multicast or broadcast address at this sub-layer, including

those that were discarded or not sent.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

multicast address at this sub-layer, including those that

were discarded or not sent. For a MAC layer protocol, this

includes both Group and Functional addresses.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

The total number of packets that higher-level protocols

requested be transmitted, and which were addressed to a

broadcast address at this sub-layer, including those that

were discarded or not sent.

Preprocessing:

- CHANGE_PER_SECOND

MIB: IF-MIB

An estimate of the interface's current bandwidth in bits per second

Preprocessing:

- MULTIPLIER: 1000000

- DISCARD_UNCHANGED_HEARTBEAT: 6h

Interface utilization percentage

Preprocessing:

- IN_RANGE: 0 100

⛔️ON_FAIL: DISCARD_VALUE ->

- JAVASCRIPT: return +parseFloat(value).toFixed(0);

Expression:

Interface utilization percentage

Preprocessing:

- IN_RANGE: 0 100

⛔️ON_FAIL: DISCARD_VALUE ->

- JAVASCRIPT: return +parseFloat(value).toFixed(0);

Expression:

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The method used to authenticate the user prior to

establishing the session.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The method used to authorize the user prior to

establishing the session.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The number of seconds elapsed since this session

was established.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The IP address assigned to the client of this session

in the private network assigned by the managed entity.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The IP address of the peer (client) assigned by the ISP.

This is the address of the client device in the public

network.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The protocol underlying this remote access session.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The algorithm used by this remote access session to

encrypt its payload.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The algorithm used by this remote access session to

to validate packets.

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 6h

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The rate of octets received by this Remote

Access Session.

This value is accumulated BEFORE determining whether

or not the packet should be decompressed.

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

MIB: CISCO-REMOTE-ACCESS-MONITOR-MIB

The rate of octets transmitted by this Remote

Access Session.

This value is accumulated AFTER determining whether

or not the packet should be compressed.

Preprocessing:

- MULTIPLIER: 8

- CHANGE_PER_SECOND

-

Preprocessing:

- DISCARD_UNCHANGED_HEARTBEAT: 1h

MIB: RFC1213-MIB

The time (in hundredths of a second) since the

network management portion of the system was last

re-initialized.

Preprocessing:

- MULTIPLIER: 0.01

CPU utilization is too high. The system might be slow to respond.

{#CISCO.ASAV.PHYS.NAME} serial number has changed. Ack to close

Manual close: YES

The system is running out of free memory.

This trigger expression works as follows:

1. Can be triggered if operations status is down.

2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)

WARNING: if closed manually - won't fire again on next poll, because of .diff.

Recovery expression:

Manual close: YES

SNMP is not available for polling. Please check device connectivity and SNMP settings.

Uptime is less than 10 minutes.

Manual close: YES