Zabbix Documentation 4.4

3.04.04.4 (current)| In development:5.0 (devel)| Unsupported:1.82.02.22.43.23.44.2Guidelines

User Tools

Site Tools


manual:appendix:protocols:header_datalen

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manual:appendix:protocols:header_datalen [2018/10/01 09:42]
127.0.0.1 external edit
manual:appendix:protocols:header_datalen [2019/05/14 08:05] (current)
vso ZBX-16123 fixed for loop to work on older bash versions
Line 1: Line 1:
-==== 4 Header ​and data length ​====+==== 4 Header ====
  
 === Overview === === Overview ===
  
-Header ​and data length are present in response and request messages between Zabbix components. It is required to determine the length of message. +Header ​is present in response and request messages between Zabbix components. It is required to determine the length of message. ​The header consists of:
 <​code>​ <​code>​
-<HEADER> - "ZBXD\x01" (bytes) +<PROTOCOL> - "​ZBXD"​ (bytes)
-<​DATALEN>​ - data length (bytes). 1 will be formatted as 01/​00/​00/​00/​00/00/00/00 (eight bytes, ​64 bit number in little-endian format)+<​FLAGS>​ -the protocol flags, (1 byte). 0x01 - Zabbix communications protocol, 0x02 - compression). 
 +<​DATALEN>​ - data length (bytes). 1 will be formatted as 01/00/00/00 (four bytes, ​32 bit number in little-endian format)
 +<​RESERVED>​ - reserved for protocol extensions (4 bytes).
 </​code>​ </​code>​
 +
 +When compression is enabled (0x02 flag) the <​RESERVED>​ bytes contains uncompressed data size, 32 bit number in little-endian format.
  
 To not exhaust memory (potentially) Zabbix protocol is limited to accept only 128MB in one connection. To not exhaust memory (potentially) Zabbix protocol is limited to accept only 128MB in one connection.
Line 20: Line 23:
 printf -v LENGTH '​%016x'​ "​${#​DATA}"​ printf -v LENGTH '​%016x'​ "​${#​DATA}"​
 PACK=""​ PACK=""​
-for i in {14..0..-2}; do PACK="​$PACK\\x${LENGTH:​$i:​2}";​ done +for (( i=14; i>=0; i-=)); do PACK="​$PACK\\x${LENGTH:​$i:​2}";​ done 
-printf "​ZBXD\1$PACK%s"​ $DATA+printf "​ZBXD\1$PACK%s" ​"$DATA"
 </​code>​| </​code>​|
 |Java|<​code Java> |Java|<​code Java>