manual:appendix:config:zabbix_web_service

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:appendix:config:zabbix_web_service [2021/05/05 07:39]
marinagen created
manual:appendix:config:zabbix_web_service [2021/05/05 08:29] (current)
marinagen improved parameter description
Line 14: Line 14:
  
 ^Parameter^Mandatory^Range^Default^Description^ ^Parameter^Mandatory^Range^Default^Description^
-|AllowedIP ​     |yes     ​| ​                        ​| ​  ​|List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies. \\ Incoming connections will be accepted only from the hosts listed here. \\ If IPv6 support is enabled then ''​127.0.0.1'',​ ''::​127.0.0.1'',​ ''::​ffff:​127.0.0.1''​ are treated equally and ''::/​0''​ will allow any IPv4 or IPv6 address. \\ ''​0.0.0.0/​0''​ can be used to allow any IPv4 address. \\ Example: ''​127.0.0.1,​192.168.1.0/​24,::​1,​2001:​db8::/​32,​zabbix.example.com''​|+|AllowedIP ​     |yes     ​| ​                        ​| ​              ​|List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies. \\ Incoming connections will be accepted only from the hosts listed here. \\ If IPv6 support is enabled then ''​127.0.0.1'',​ ''::​127.0.0.1'',​ ''::​ffff:​127.0.0.1''​ are treated equally and ''::/​0''​ will allow any IPv4 or IPv6 address. \\ ''​0.0.0.0/​0''​ can be used to allow any IPv4 address. \\ Example: ''​127.0.0.1,​192.168.1.0/​24,::​1,​2001:​db8::/​32,​zabbix.example.com''​|
 |DebugLevel ​    ​|no ​     |0-5                      |3   ​|Specifies debug level: \\ 0 - basic information about starting and stopping of Zabbix processes \\ 1 - critical information \\ 2 - error information \\ 3 - warnings \\ 4 - for debugging (produces lots of information) \\ 5 - extended debugging (produces even more information) | |DebugLevel ​    ​|no ​     |0-5                      |3   ​|Specifies debug level: \\ 0 - basic information about starting and stopping of Zabbix processes \\ 1 - critical information \\ 2 - error information \\ 3 - warnings \\ 4 - for debugging (produces lots of information) \\ 5 - extended debugging (produces even more information) |
-|ListenPort ​    ​|no ​     |1024-32767 ​              ​|10053 ​ |Service will listen on this port for connections from the server.| +|ListenPort ​    ​|no ​     |1024-32767 ​              ​|10053 ​ |The port service listens on for connections from the server.| 
-|LogFile ​       |no      |                         ​| ​  |Log file name for LogType '​file'​ parameter. This parameter is required, if LogType is set to //file//. \\ Example: ''/​tmp/​zabbix_web_service.log''​ |+|LogFile ​       |yes, if LogType is set to //file//, otherwise ​no   ​|                         ​| ​  |Log file name for LogType '​file'​ parameter. \\ Example: ''/​tmp/​zabbix_web_service.log''​ |
 |LogFileSize ​   |no      |0-1024 ​                  ​|1 ​  ​|Maximum size of log file in MB. \\ 0 - disable automatic log rotation. | |LogFileSize ​   |no      |0-1024 ​                  ​|1 ​  ​|Maximum size of log file in MB. \\ 0 - disable automatic log rotation. |
-|LogType ​       |no      |system / file / console ​ |   ​|Specifies where log messages are written to: \\ //system// - syslog \\ //file// - file specified with LogFile parameter \\ //console// - standard output ​ |+|LogType ​       |no      |system / file / console ​ |file   |Specifies where log messages are written to: \\ //system// - syslog \\ //file// - file specified with LogFile parameter \\ //console// - standard output ​ |
 |Timeout ​ | no | 1-30 |3 |Spend no more than Timeout seconds on processing. | |Timeout ​ | no | 1-30 |3 |Spend no more than Timeout seconds on processing. |
-|TLSAccept ​ | no |unencrypted / cert  | |Specifies what type of connection to use:: \\ //​unencrypted//​ - accept connections without encryption (default) \\ //cert// - accept connections with TLS and a certificate ​ |+|TLSAccept ​ | no |unencrypted / cert  |unencrypted ​|Specifies what type of connection to use: \\ //​unencrypted//​ - accept connections without encryption (default) \\ //cert// - accept connections with TLS and a certificate ​ |
 |TLSCAFile ​ | no |  | |Full pathname of a file containing the top-level CA(s) certificates for peer certificate verification,​ used for encrypted communications between Zabbix components. ​ | |TLSCAFile ​ | no |  | |Full pathname of a file containing the top-level CA(s) certificates for peer certificate verification,​ used for encrypted communications between Zabbix components. ​ |
 |TLSCertFile ​ | no |  | |Full pathname of a file containing the service certificate or certificate chain, used for encrypted communications with Zabbix components. ​ | |TLSCertFile ​ | no |  | |Full pathname of a file containing the service certificate or certificate chain, used for encrypted communications with Zabbix components. ​ |