Table of Contents
2 Problemas de atualização relacionados ao escape
Limite de caracteres excedido para parâmetros de função após a atualização
A escape adequada de barras invertidas foi adicionada nos parâmetros de string de funções de histórico no Zabbix 7.0.
Como barras invertidas adicionais são adicionadas durante a atualização de versões do Zabbix anteriores à 7.0, isso leva a parâmetros mais longos, o que pode resultar em funções de trigger quebradas se o comprimento do parâmetro exceder o tamanho máximo de dados de 255 caracteres.
Para ilustrar quais problemas podem surgir durante a atualização do banco de dados, qual é o seu impacto, como reconhecê-los e corrigi-los, vamos tomar um exemplo de configuração com 3 items e 2 triggers.
Configuração
Versão 6.0 do Zabbix.
Arquivo
/tmp/ONEque contém 114 barras invertidas com 'a' no final:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\aUm item
vfs.file.contents[/tmp/ONE]para ler o /tmp/ONE.Dois itens calculados:
Calc_228 - seu parâmetro contém 228 barras invertidas, que são escapadas, então elas correspondem às 114 barras invertidas do arquivo /tmp/ONE:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Calc_232 - seu parâmetro contém 232 barras invertidas, que são escapadas, então elas não correspondem às 114 barras invertidas do arquivo /tmp/ONE, pois precisam de pelo menos 116 barras invertidas reais:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")- Dois triggers:
Trig_228 - similar ao Calc_228, seu parâmetro contém 228 barras invertidas para corresponder a 114 barras invertidas reais do arquivo /tmp/ONE:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Trig_232 - similar ao Calc_232, seu parâmetro contém 232 barras invertidas para corresponder a 116 barras invertidas reais, então não corresponde às 114 barras invertidas do arquivo /tmp/ONE:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1h:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Calc_228 retorna 1 e Trig_228 dispara.
Calc_232 retorna 0 e Trig_232 não dispara.
Atualização
- Execute a atualização para 8.0.0, verifique os logs para o aviso:
2485502:20250228:115442.236 DBpatch_6050165(): cannot save in DB function parameter: resulting size 477 is longer than the maximum 255.
functionid:33792 function:'find'
used on host: 'Zabbix server'
in trigger: 'TRIG_228'.
Current parameter value:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"'
Resulting escaped value would be:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"
DB upgrade and Zabbix server can continue to run, but to make sure this function works correctly
MANUAL INTERVENTION IS REQUIRED !
Need to manually reduce the size of this parameter with macro as a workaround.
2485502:20250228:115442.237 DBpatch_6050165(): cannot save in DB function parameter: resulting size 485 is longer than the maximum 255.
functionid:33795 function:'find'
used on host: 'Zabbix server'
in trigger: 'TRIG_232'.
Current parameter value:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"'
Resulting escaped value would be:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"
DB upgrade and Zabbix server can continue to run, but to make sure this function works correctly
MANUAL INTERVENTION IS REQUIRED !
Need to manually reduce the size of this parameter with macro as a workaround.A atualização do banco de dados termina e o Zabbix server continua em execução.
Calc_228 ainda retorna 1 enquanto Calc_232 retorna 0.
Os triggers foram atualizados da seguinte forma:
Trig_228:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Trig_232:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Ambos os triggers - Trig_228 e Trig_232 disparam agora! Isso é inesperado, portanto, intervenção manual é necessária.
Intervenção manual
As expressões de trigger precisam ser atualizadas para que suas barras invertidas sejam escapadas, no entanto, isso não pode ser feito porque os parâmetros resultantes seriam muito longos.
Por isso, você precisa adicionar macros:
{$228_BACKSLASHES_A}:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a{$232_BACKSLASHES_A}:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ae atualize as expressões de trigger para usá-las:
Trig_228:
Trig_232:
Agora ambos os triggers funcionam da mesma forma que antes - apenas o Trig_228 está disparando.
Não há problemas com os items calculados, mas eles também podem ser atualizados para manter a consistência:
Calc_228:
Calc_232: