Table of Contents
Problemas de actualización
Relacionado con el escape
Límite de caracteres excedido para los parámetros de función después de la actualización
En Zabbix 7.0 se ha añadido el escape adecuado de las barras invertidas en los parámetros de cadena de las funciones de histórico.
Como se añaden barras invertidas adicionales durante la actualización desde versiones de Zabbix anteriores a la 7.0, esto da lugar a parámetros más largos que pueden provocar que las funciones de los triggers se rompan si la longitud del parámetro supera el tamaño máximo de datos de 255 caracteres.
Para ilustrar qué problemas pueden surgir durante la actualización de la base de datos, cuál es su impacto, cómo reconocerlos y solucionarlos, tomemos como ejemplo una configuración con 3 items y 2 triggers.
Configuración
Versión 6.0 de Zabbix.
Archivo
/tmp/ONEque contiene 114 barras invertidas con una 'a' al final:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\aUn item
vfs.file.contents[/tmp/ONE]para leer /tmp/ONE.Dos items calculados:
Calc_228 - su parámetro contiene 228 barras invertidas, que están escapadas, por lo que coinciden con las 114 barras invertidas del archivo /tmp/ONE:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Calc_232 - su parámetro contiene 232 barras invertidas, que están escapadas, por lo que no coinciden con las 114 barras invertidas del archivo /tmp/ONE, ya que necesitan al menos 116 barras invertidas reales:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")- Dos triggers:
Trig_228 - de manera similar a Calc_228, su parámetro contiene 228 barras invertidas para coincidir con 114 barras invertidas reales del archivo /tmp/ONE:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Trig_232 - de manera similar a Calc_232, su parámetro contiene 232 barras invertidas para coincidir con 116 barras invertidas reales, por lo que no coincide con las 114 barras invertidas del archivo /tmp/ONE:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1h:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Calc_228 devuelve 1 y Trig_228 se dispara.
Calc_232 devuelve 0 y Trig_232 no se dispara.
Actualización
- Ejecute la actualización a 8.0.0, revise los registros para ver la advertencia:
2485502:20250228:115442.236 DBpatch_6050165(): cannot save in DB function parameter: resulting size 477 is longer than the maximum 255.
functionid:33792 function:'find'
used on host: 'Zabbix server'
in trigger: 'TRIG_228'.
Current parameter value:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"'
Resulting escaped value would be:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"
DB upgrade and Zabbix server can continue to run, but to make sure this function works correctly
MANUAL INTERVENTION IS REQUIRED !
Need to manually reduce the size of this parameter with macro as a workaround.
2485502:20250228:115442.237 DBpatch_6050165(): cannot save in DB function parameter: resulting size 485 is longer than the maximum 255.
functionid:33795 function:'find'
used on host: 'Zabbix server'
in trigger: 'TRIG_232'.
Current parameter value:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"'
Resulting escaped value would be:
'$,1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a"
DB upgrade and Zabbix server can continue to run, but to make sure this function works correctly
MANUAL INTERVENTION IS REQUIRED !
Need to manually reduce the size of this parameter with macro as a workaround.La actualización de la base de datos finaliza y el servidor Zabbix continúa ejecutándose.
Calc_228 todavía devuelve 1 mientras que Calc_232 devuelve 0.
Los triggers se actualizaron de la siguiente manera:
Trig_228:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")Trig_232:
find(/Zabbix server/vfs.file.contents[/tmp/ONE],1m:now,"regexp","\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a")¡Ambos triggers - Trig_228 y Trig_232 se disparan ahora! Esto es inesperado, por lo que se requiere intervención manual.
Intervención manual
Las expresiones de trigger deben actualizarse para que sus barras invertidas estén escapadas, sin embargo, esto no se puede hacer porque los parámetros resultantes serían demasiado largos.
Por eso es necesario añadir macros:
{$228_BACKSLASHES_A}:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\a{$232_BACKSLASHES_A}:
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ay actualizar las expresiones de trigger para que las utilicen:
Trig_228:
Trig_232:
Ahora ambos triggers funcionan igual que antes: solo Trig_228 está disparado.
No hay problemas con los items calculados, pero también podrían actualizarse por coherencia:
Calc_228:
Calc_232: