1 פונקציות מצטברות

אלא אם צוין אחרת, כל הפונקציות המפורטות כאן נתמכות ב:

• ביטויי טריגר
• פריטים מחושבים

פונקציות מצטברות יכולות לעבוד עם:

• היסטוריה של פריטים, לדוגמה, min(/host/key,1h)
• foreach functions as הפרמטר היחיד, לדוגמה, min(last_foreach(/*/key))

כמה הערות כלליות על פרמטרי פונקציה:

• פרמטרים של פונקציה מופרדים בפסיק
• פרמטרים אופציונליים של פונקציה (או חלקי פרמטר) מסומנים על ידי < >
• פרמטרים ספציפיים לפונקציה מתוארים עם כל פונקציה
• פרמטרים /host/key ו-(sec|#num)<:time shift> לא חייבים להיות מְצוּטָט

פרמטרים נפוצים

• /host/key הוא פרמטר ראשון חובה נפוץ עבור הפונקציות הפניה להיסטוריית הפריט המארח
• (sec|#num)<:time shift> הוא פרמטר שני נפוץ עבור פונקציות המתייחסות להיסטוריית פריט המארח, כאשר:
  • שניה - מקסימום הערכה period בשניות (ניתן להשתמש בזמן סיומות, או
  • #num - מקסימום הערכה range לאחרונה ערכים שנאספו (אם לפניהם סימן גיבוב)
  • משמרת זמן (אופציונלית) מאפשרת להזיז את נקודת ההערכה אחורה בזמן. ראה עוד details](/manual/config/triggers/expression#time_shift) פועל ציון משמרת זמן.

Function details

Some general notes on function parameters:

• Function parameters are separated by a comma
• Optional function parameters (or parameter parts) are indicated by < >
• Function-specific parameters are described with each function
• /host/key and (sec|#num)<:time shift> parameters must never be quoted

avg(/host/key,(sec|#num)<:time shift>)

The average value of an item within the defined evaluation period.
Supported value types: Float, Integer.

Parameters: see common parameters.

Time shift is useful when there is a need to compare the current average value with the average value some time ago.

Examples:

avg(/host/key,1h) #the average value for the last hour until now
avg(/host/key,1h:now-1d) #the average value for an hour from 25 hours ago to 24 hours ago from now
avg(/host/key,#5) #the average value of the five latest values
avg(/host/key,#5:now-1d) #the average value of the five latest values excluding the values received in the last 24 hours

bucket_percentile(item filter,time period,percentage)

Calculates the percentile from the buckets of a histogram.

Parameters:

• item filter - see item filter;
  
• time period - see time period;
  
• percentage - percentage (0-100).

Comments:

• Supported only in calculated items;
• This function is an alias for histogram_quantile(percentage/100, bucket_rate_foreach(item filter, time period, 1)).

count(func_foreach(item filter,<time period>))

The count of values in an array returned by a foreach function.
Supported value type: Integer.

Parameters:

• func_foreach - foreach function for which the number of returned values should be counted (with supported arguments). See foreach functions for details.
• item filter - see item filter;
  
• time period - see time period.

Using count() with a history-related foreach function (max_foreach, avg_foreach, etc.) may lead to performance implications, whereas using exists_foreach(), which works only with configuration data, will not have such effect.

Examples:

count(max_foreach(/*/net.if.in[*],1h)) #the number of net.if.in items that received data in the last hour until now

histogram_quantile(quantile,bucket1,value1,bucket2,value2,...)

Calculates the φ-quantile from the buckets of a histogram.

Parameters:

• quantile - 0 ≤ φ ≤ 1;
  
• bucketN, valueN - manually entered pairs (>=2) of parameters or the response of bucket_rate_foreach.

Comments:

• Supported only in calculated items;
• Functionally corresponds to 'histogram_quantile' of PromQL;
• Returns -1 if values of the last 'Infinity' bucket ("+inf") are equal to 0.

Examples:

histogram_quantile(0.75,1.0,last(/host/rate_bucket[1.0]),"+Inf",last(/host/rate_bucket[Inf]))
histogram_quantile(0.5,bucket_rate_foreach(//item_key,30s))

item.count(item filter)

The count of existing items in configuration that match the filter criteria.
Supported value type: Integer.

Parameter:

• item filter - criteria for item selection, allows referencing by host group, host, item key, and tags. Wildcards are supported. See item filter for more details.
  

Comments:

• Supported only in calculated items;
• Works as an alias for the count(exists_foreach(item_filter)) function.

Examples:

item_count(/*/agent.ping?[group="Host group 1"]) #the number of hosts with the *agent.ping* item in the "Host group 1"

kurtosis(/host/key,(sec|#num)<:time shift>)

The "tailedness" of the probability distribution in collected values within the defined evaluation period. See also: Kurtosis.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

kurtosis(/host/key,1h) #kurtosis for the last hour until now

mad(/host/key,(sec|#num)<:time shift>)

The median absolute deviation in collected values within the defined evaluation period. See also: Median absolute deviation.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

mad(/host/key,1h) #median absolute deviation for the last hour until now

max(/host/key,(sec|#num)<:time shift>)

The highest value of an item within the defined evaluation period.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

max(/host/key,1h) - min(/host/key,1h) #calculate the difference between the maximum and minimum values within the last hour until now (the delta of values)

min(/host/key,(sec|#num)<:time shift>)

The lowest value of an item within the defined evaluation period.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

max(/host/key,1h) - min(/host/key,1h) #calculate the difference between the maximum and minimum values within the last hour until now (the delta of values)

skewness(/host/key,(sec|#num)<:time shift>)

The asymmetry of the probability distribution in collected values within the defined evaluation period. See also: Skewness.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

skewness(/host/key,1h) #the skewness for the last hour until now

stddevpop(/host/key,(sec|#num)<:time shift>)

The population standard deviation in collected values within the defined evaluation period. See also: Standard deviation.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

stddevpop(/host/key,1h) #the population standard deviation for the last hour until now

stddevsamp(/host/key,(sec|#num)<:time shift>)

The sample standard deviation in collected values within the defined evaluation period. See also: Standard deviation.
Supported value types: Float, Integer.

Parameters: see common parameters.

At least two data values are required for this function to work.

Example:

stddevsamp(/host/key,1h) #the sample standard deviation for the last hour until now

sum(/host/key,(sec|#num)<:time shift>)

The sum of collected values within the defined evaluation period.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

sum(/host/key,1h) #the sum of values for the last hour until [now

sumofsquares(/host/key,(sec|#num)<:time shift>)

The sum of squares in collected values within the defined evaluation period.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

sumofsquares(/host/key,1h) #the sum of squares for the last hour until [now

varpop(/host/key,(sec|#num)<:time shift>)

The population variance of collected values within the defined evaluation period. See also: Variance.
Supported value types: Float, Integer.

Parameters: see common parameters.

Example:

varpop(/host/key,1h) #the population variance for the last hour until now

varsamp(/host/key,(sec|#num)<:time shift>)

The sample variance of collected values within the defined evaluation period. See also: Variance.
Supported value types: Float, Integer.

Parameters: see common parameters.

At least two data values are required for this function to work.

Example:

varsamp(/host/key,1h) #the sample variance for the last hour until now

See all supported functions.