Documentation
Table of Contents
21 Problem hosts
Description
These parameters and the possible property values for the respective dashboard widget field objects allow to configure the Problem hosts widget in dashboard.create and dashboard.update methods.
Parameters
The following parameters are supported for the Problem hosts widget.
| Parameter | type | name | value | |
|---|---|---|---|---|
| Refresh interval | 0 | rf_rate | 0 - No refresh; 10 - 10 seconds; 30 - 30 seconds; 60 - (default) 1 minute; 120 - 2 minutes; 600 - 10 minutes; 900 - 15 minutes. |
|
| Host groups | 2 | groupids | Host group ID. Note: To configure multiple host groups, create a dashboard widget field object for each host group. |
|
| Exclude host groups | 2 | exclude_groupids | Host group ID. Note: To exclude multiple host groups, create a dashboard widget field object for each host group. |
|
| Hosts | 3 | hostids | Host ID. Note: To configure multiple hosts, create a dashboard widget field object for each host. For multiple hosts, the parameter Host groups must either be not configured at all or configured with at least one host group that the configured hosts belong to. |
|
| Problem | 1 | problem | Problem event name (case insensitive, full name or part of it). | |
| Severity | 0 | severities | 0 - Not classified; 1 - Information; 2 - Warning; 3 - Average; 4 - High; 5 - Disaster. Default: 1, 2, 3, 4, 5 (all enabled). Note: To configure multiple values, create a dashboard widget field object for each value. |
|
| Tags (the number in the property name (e.g. tags.tag.0) references tag order in the tag evaluation list) | ||||
| Evaluation type | 0 | evaltype | 0 - (default) And/Or; 2 - Or. |
|
| Tag name | 1 | tags.tag.0 | Any string value. Parameter Tag name required if configuring Tags. |
|
| Operator | 0 | tags.operator.0 | 0 - Contains; 1 - Equals; 2 - Does not contain; 3 - Does not equal; 4 - Exists; 5 - Does not exist. Parameter Operator required if configuring Tags. |
|
| Tag value | 1 | tags.value.0 | Any string value. Parameter Tag value required if configuring Tags. |
|
| Show suppressed problems | 0 | show_suppressed | 0 - (default) Disabled; 1 - Enabled. |
|
| Hide groups without problems | 0 | hide_empty_groups | 0 - (default) Disabled; 1 - Enabled. |
|
| Problem display | 0 | ext_ack | 0 - (default) All; 1 - Unacknowledged only; 2 - Separated. |
|
例
次の例は、Problem hostsウィジェットのダッシュボードウィジェットフィールドオブジェクトの設定を説明することだけを目的としています。 ダッシュボードの設定の詳細については、dashboard.createを参照してください。
Configuring a Problem hosts widget
Configure a Problem hosts widget that displays hosts from host groups "2" and "4" that have problems with a name that includes the string "CPU" and that have the following severities: "Warning", "Average", "High", "Disaster".
{
"jsonrpc": "2.0",
"method": "dashboard.create",
"params": {
"name": "My dashboard",
"display_period": 30,
"auto_start": 1,
"pages": [
{
"widgets": [
{
"type": "problemhosts",
"name": "Problem hosts",
"x": 0,
"y": 0,
"width": 12,
"height": 5,
"view_mode": 0,
"fields": [
{
"type": 2,
"name": "groupids",
"value": 2
},
{
"type": 2,
"name": "groupids",
"value": 4
},
{
"type": 1,
"name": "problem",
"value": "cpu"
},
{
"type": 0,
"name": "severities",
"value": 2
},
{
"type": 0,
"name": "severities",
"value": 3
},
{
"type": 0,
"name": "severities",
"value": 4
},
{
"type": 0,
"name": "severities",
"value": 5
}
]
}
]
}
],
"userGroups": [
{
"usrgrpid": 7,
"permission": 2
}
],
"users": [
{
"userid": 1,
"permission": 3
}
]
},
"id": 1
}Response: